Used Jagenberg Diana 105-2 for sale (79,195)

Condition: excellent (used), Year of construction: 1991, Available immediately 3 points 4 nossels Ijdpfxsv E N R Ds Am Djih Crash lock 1/3 fold cd fold vibrator on feeder

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Manufacturer: Jagenberg Machine type: Folder-gluer with automatic packing machine Model: Diana 104-1 + Japack 40-2 Iisdpfxjrnkwre Am Dsh Year of manufacture: FKM 1997, overhauled 2020 Year of manufacture: Automatic packing machine 1985, overhauled 2020 Location: 41751 Viersen, North Rhine-Westphalia Format range: min. 50 mm, max. 1,040 mm Equipment of the Diana 104-1: - Pre-breaking station with device for pre-breaking the 3rd creasing line - Module 150 with servo-driven overrun folding - Bottom gluing unit with 5 mm glue disk, including pump (for 30 l hobbock) - Folding station - Threading station / central transport - Transfer station - Pneumatic collecting/pressing device - Digital position sensors - Electronic control system, including counter and start/stop removal control Mode - Top gluing unit (model year 2021/2022) from BaumerHHS, type Xact, with 4 channels, 3 glue nozzles, touchscreen interface, job memory, including stainless steel piston pump This machine is equipped for processing side-glued folding boxes, lock-bottom boxes, single-fold folding boxes, and 4-point erectable boxes. A compressor is not included. Other: The machine is in very good condition, ready for operation, and can be inspected during production upon request. Availability: Immediately We look forward to your inquiry. Your WS Quack + Fischer Team

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, machine/vehicle number: 210927, total width: 2,000 mm, total length: 15,000 mm, total height: 1,400 mm, The machine is being sold because our company's processing division has been discontinued. This Jagenberg Diana gluing machine is the ultimate all-rounder for folding carton gluing. Most of our folding cartons had an open size between 14 and 30 cm, but with a maximum width of 125 cm, large formats are no problem either. The machine can handle straight-line, crash-lock bottom, as well as 4- and 6-corner gluing. It was operated in single-shift mode without any technical issues. We retrofitted the quality inspection system from hhs, which includes product type detection with an ejection station and glue application monitoring. All belts were regularly replaced. The electric motor has been completely overhauled with new windings. The machine's main drive is via a robust coupling system rather than belts, as is common with later models. The machine is user-friendly, with all units easily accessible. Its overall condition is excellent, with only age-related signs of use. If interested, we can provide a video via email. Ijdpfxsx R Sn Io Am Dsih

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2433380060, overall weight: 176 kg, nominal power: 0.75 kW (1.02 HP), rotational speed (max.): 950 rpm, protection type (IP code): IP54, The devices in the COLOUR JET series are optimally designed for extracting paint mist and solvents at wet painting workstations. The front guide plate ensures that the mist is captured from below and at the side inlets, as solvents from paints settle and collect near the floor. At the same time, the guide plate enables uniform air distribution over the filter and protects the filter medium from direct exposure. Paint pigments are separated by the large-area replaceable filter, and the cleaned exhaust air is then discharged to the outside via a pipe or hose. Iiedpfezkgwnox Am Deh Dimensions (W x D x H) in mm: 1,012 x 1,405 x 943

Condition: used, Year of construction: 1989, Jagenberg Diana 65-1 folder gluer, production year 1989. - Straight line gluing Iiodpfow H Rc Nox Am Dsh - 3-point gluing, crash lock, lock bottom - KQ glue system with 4 guns - Machine cleaned, in production – can be inspected upon request, in very good condition

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 364080, color channels: 2, paper width (max.): 1,000 mm, paper height (max.): 700 mm, counter reading (black): 345,000,000, counter reading (color): 345,000,000, type of input current: three-phase, KBA Rapida 105 offset press, equipped with a perfector and specially configured for printing on thin paper. Price: 99.500 EUR FCA Year of manufacture: 2002 Impressions: 345 million Format: 1000 × 700 mm Iijdpfjznuyxox Am Dsh Colours: 2+0 or 1+1 Perfector: Yes Equipment: Suitable for thin paper printing Availability: August 2026

Condition: used, Year of construction: 1999, Format: 1650 mm Iisdeyz Acqspfx Am Djh Equipment: Automatic feeder unit Extended folding and transfer section Press/delivery section Conveyor-type delivery Linear rail-based manual adjustment elements Top control panel / operator panel Safety equipment (protective guards, emergency stop, etc.) Gluing line (glue application infrastructure available) 5 glue gun nozzles for 3/4-point gluing, or alternatively for longitudinal seam gluing Cold glue (PVA) Valkomelton gluing system Glue Station / 4-Point ??? 4 GP, 1999 Breaker: Jagenberg, 1999, Separator / Breaker Mosca RO MP2, 2000, Bundler

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Iiodpfxjzu T Sme Am Deh Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Condition: like new (used), Year of construction: 2017, operating hours: 180 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10 rpm, spindle speed (min.): 10,000 rpm, table length: 800 mm, type of input current: three-phase, total height: 2,200 mm, total length: 2,164 mm, total width: 1,860 mm, overall weight: 2,800 kg, table load: 300 kg, grinding spindle motor power: 15,000 W, workpiece weight (max.): 300 kg, Equipment: documentation/manual, rotational speed infinitely variable, type plate available,

Condition: used, Year of construction: 2014, x-travel 1060 mm y-travel 520 mm z-travel 610 mm Iiodpo Aaq T Nsfx Am Doh control Siemens weight of the machine ca. 5900 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 1044951, Size 90 cm, straight line, lock bottom, 6 feeder belts, vibrator on feeder, pre-fold station, final fold station Ijdpfoyx Trdex Am Doih

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Iiodpfx Aez Rplyjm Djh Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Can be injected twice. Option with mould tilting. Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will assist you (by phone at ...). Seppi M. H3 105 Mulcher / incl. rotation motor / NEW / in stock & immediately available Price: €10,590.00 net / €12,602.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic boom - Mulches grass and brush up to 3 cm Ø - Suitable for excavators from 2 to 5 tons - Compatible with various mounting plate systems - Floating mount (parallelogram guide) - Indirect V-belt drive with 3 V-belts - Drive suitable for hydraulic motor depending on the carrier machine's hydraulic flow - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection with rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammers (standard) - 9 pcs., part number 150.02.041 OPT 429 Hydraulic gear motor 17 cm³ Iisdpsyix Htefx Am Deh - With flow control valve and "DRAIN SAFE TM" motor safety valve protects the motor in the event of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO drain line required!) - Including hoses and check valve OPT 372 Hydraulic 190° rotation device Optional: MS03 adapter plate incl. intermediate flange, bolts and installation = €700 net Two hydraulic lines are required: supply and return. No drain line needed! Additionally, a separate hydraulic circuit is required for the rotator. The machine is delivered without hoses or couplings. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a wide selection of various Seppi M. products available from stock! Feel free to contact us at / . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. product range! Subject to errors and prior sale! = More information = Contact Marius Herden for more information.

Condition: new, Year of construction: 2024, Special offer: €42,000 (instead of €49,900), excluding VAT. Immediately available / Made in Italy Included premium features: - Heidenhain ND5023 3-axis position display - 5-position length stop for the carriage - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting - Set of leveling pads from Spinelli Iijdpspq R Rdofx Am Doh Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse - Air supply on the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free movement of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chuck guard with microswitch, turret plexiglass guard, rear guard covering the entire machine length, guard for leadscrew and feed rods, emergency stop button - Chip tray on wheels - Cooling system with electric pump - Central lubrication of the guides with automatic pump - Traveling and steady rest - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Optional features: - 3- / 4-jaw chuck Technical data: - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Compound slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 - Total weight: 3200 kg

Condition: good (used), Year of construction: 2011, operating hours: 78,000 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 55 mm, injection pressure: 1,615 bar, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 12,200 kg, warehouse no.: 503731 manufacturer: ENGEL type: Victory 1050-220 spex controller: CC 200 A02 year of construction: 2011 operation hours: 78000 h clamping force: 2200 kN size of mould plates h x v: 880 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm injection volume: 510 ccm Spritzdruck: 1615 bar equipment included: screen text german core pulling hydraulically 2x machine incl. Handling Isdpfxsz D U Ilj Am Deih Anti vibration mounts mould heating 8x technical data robot-system handling type: Linear manufacture: ENGEL controller: Viper 6 year of construction: 2011 measures of machine l x w x h: 5.7m x 1.7m x 2.2m total weight: 12200KG

Condition: new, Year of construction: 2023, working width: 105,000 mm, Seppi M. H3 105 Flail Mower / DEMO Unit / Year of Manufacture: 2023 / incl. MS03 adapter plate / in stock & immediately available Price: €10,790.00 net / €12,840.10 gross Iisdoznrp Depfx Am Djh - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic arm - mulches grass and bushes up to 3 cm in diameter - for excavators from 2 to 5 tons - for mounting on various adapter plates - floating mounting (parallelogram guidance) - indirect V-belt drive with 3 V-belts - drive designed for hydraulic motor depending on the flow rate of the carrier machine - housing made of wear-resistant AR400 steel - front protection with chains - rear protection made of rubber - reinforced support roller with double tapered roller bearing, height adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) - 9 pieces, part number 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - with flow control valve and motor safety valve DRAIN SAFE TM protects the motor in case of incorrect use - required hydraulic pressure in bar (min-max): 150 - 250 - required hydraulic flow rate in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO leak oil line needed!!) - including hoses and check valve OPT 372 hydr. 190° swivel device 2 hydraulic lines are required: supply and return. No leak oil! In addition, a hydraulic circuit is needed for the swivel ring. The unit is supplied without hoses and connections. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, which are immediately available! Please contact us for this at . On request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted! = Further information = Intended use: Agriculture Please contact Marius Herden for further information.

Condition: new, working width: 105,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you by phone. Seppi M. H3 105 Mulcher / NEW / in stock & immediately available Price: €6,490.00 net / €7,723.10 gross - Working width: 105 cm - Total width: 117 cm Iedpsyix Hmefx Am Deih - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulcher head for mounting on a hydraulic arm - Mulches grass and brushwood up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes - Can be fitted to various adapter plates - Floating mount (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive prepared for hydraulic motor, depending on the hydraulic flow of the carrier machine - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double-taper roller bearings, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW hammer flails (standard) - 9 pieces, Part No. 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - With flow control valve and DRRAIN SAFE™ motor safety valve protecting the motor from incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow rate in l/min (min-max): 35 - 60 Optional: MS03 adapter plate incl. bolts and installation = €530.00 net 3 hydraulic lines required: pressure, return, and leakage oil. The unit is supplied without hoses and fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of various Seppi M. products in stock for immediate delivery! Mr. Herden (phone number) is happy to assist you. Upon request, we are also pleased to provide you with a financing offer. We are an official sales and service partner for Westtech. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! = Further information = Intended use: Agriculture Please contact Marius Herden for more information.

Condition: good (used), Year of construction: 2007, operating hours: 3,800 h, GENIE S-105 Telescopic aerial work platform / boom lift 4x4x4 DEUTZ DIESEL 3800 hours 34M working height, 2007. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). Isdpfx Aezypu Ism Djih You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mileage: 146,041 km, power: 77 kW (104.69 HP), first registration: 05/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, Year of manufacture: 2017 Unladen weight: 2,131 kg Payload: 1,009 kg Gross vehicle weight rating (GVWR): 3,140 kg Damage: none Iodpszxlprjfx Am Djih

Condition: used, Year of construction: 2023, For inquiries regarding the attachment, Mr. Herden will be your contact (by phone). Seppi M. MINI-BMS 105 / 5-10 t / Forestry Mulcher / CUT CONTROL / DEMO – Unit / Year: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross Iiedsyltv Uopfx Am Deh - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - Suitable for mulching along riverbanks, in forests, and other hard-to-access areas - Mulches brushwood and shrubs up to 10 cm Ø - For excavators from 5-10 tonnes - For mounting on various adapter plates - Drive designed for hydraulic motor, depending on the carrier vehicle’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Skids, height-adjustable, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 130 Spacer adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available for immediate delivery. An independent hydraulic power unit is recommended for the drive. 3 hydraulic lines are required: supply, return, and drain. An additional double-acting hydraulic connection is needed for the hydraulic hood. The unit is supplied without hoses, connectors, and adapter plate. Financing offers available upon request. We are an official distribution and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are among the largest commercial vehicle dealers in Germany. We offer the full Seppi M. product range! Subject to errors and prior sale! Internal no.: 170048 Contact Marius Herden for further information.

Condition: used, mileage: 400,000 km, power: 280 kW (380.69 HP), first registration: 07/2005, fuel type: diesel, overall weight: 36,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, SCANIA 114 G 380 8 x 4 HIAB CRANE 2 x LIFT AXLE *ROLL-OFF TIPPER----VEHICLE HISTORY * VEHICLE ORIGINATES FROM THE NETHERLANDS * DELIVERY TO ALL PORTS POSSIBLE UPON REQUEST VEHICLE EQUIPMENT * MANUAL GEARBOX * RETARDER * STEERING AXLE * CRUISE CONTROL * 2 X LIFT AXLE * HIAB LOADING CRANE * TYPE: 105 Z * 7.8 M LONG * TRAILER COUPLING * ROOF SPOTLIGHTS * TOOL BOX Iijdjy Sq Ehepfx Am Deh * GVW: 36,000 KG * PAYLOAD: 15,032 KG * VERY GOOD TYRES * IMMEDIATELY OPERATIONAL FOR MORE INFORMATION: ----EXPORT DECLARATION, CUSTOMS EXW WITHIN 10 MIN. (APPROVED EXPORTER) 5 DAY, 15 DAY, 30 DAY LICENSE PLATES, AND 15 DAY AUSTRIAN PLATES EURO 1 TECH. DATA SHEET (DATA TECNICI) RESERVATIONS FOR VEHICLES ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied. Subject to change, error, and prior sale! More vehicles can be found on our website. Sale only according to our General Terms and Conditions – see website Important note – Important information: Despite careful verification of all details in our offer, errors may occur. Some may be due to transmission errors in the systems of the various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in terms of §145 BGB. Rather, it is for information purposes regarding contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Iedpfx Aj Aarbbjm Djih

Condition: excellent (used), mileage: 79,873 km, power: 180 kW (244.73 HP), first registration: 02/1994, fuel type: diesel, axle configuration: 4x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of seats: 2, loading space length: 4,440 mm, loading space width: 2,460 mm, loading space height: 600 mm, Equipment: crane, Crane Number of hydraulic extensions: 2 Number of manual extensions: 1 Number of support legs: 2 Load Hook: ✓ = More information = General information Number of doors: 2 Year of construction: 1994 Cab: single Registration number: 3081UI Axle configuration Front axle: Steering Rear axle: Double wheels Functional Crane: PALFINGER PK10500B4, year of manufacture 1991, behind the cab Tipper: Left / Right / Back Environment Iodpfxoz S Nwrj Am Dsih Emission class: Euro 0 Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Iedpfx Amszbg Eze Deih Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: new, *AVAILABLE IMMEDIATELY* Includes: Aluminum lid with front hinge, 2x side panel extensions Features: -V2A screws -Removable lid -Aluminum lid Net: €3,210.08 / Gross: €3,820.00 Article number: K21010201002.01 Technical data: • Brand: Koch-Anhänger • Model: B1000 • Vehicle type: Covered trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 205 x 105 x 80 cm • External dimensions (LxWxH): 306 x 157 x 147 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,000 kg • Unladen weight: 240 kg • Payload: 760 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185/70R13 • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Yes DESCRIPTION • Side panel height 75 cm + lid height 5cm • Double-walled, anodized aluminum side panels, 30 mm, with integrated aluminum frame • Side panel with load securing system. Accessories such as lashing eyes can be easily mounted without drilling. • Lashing bars made of stainless steel (V2A, rustproof) • Stable, non-slip floor (birch wood, waterproof glued) Iijdpjzy A Uusfx Am Doh • Very stable locks for the rear door made of V2A stainless steel (unique) • Lid can be opened from the rear • 2 stable V2A stainless steel hinges in the front • Stable aluminum lid with walkable aluminum tread plate • 8 mm V2A screws • Stable lid railing • Optional: Crossbar set can be mounted on the railing • Stable V2A lid lock at the rear with disc lock • 2 gas springs for easy opening • Lid can be easily removed • Maintenance-free rubber spring axle, hot-dip galvanized • Chassis and drawbar from well-known manufacturer ALKO • Safety indicator on the coupling • Steel fenders • Rear door can be easily removed • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Standard equipped with high-quality 1A brand tires • Large 185/70R13 tires, balanced and capable of 100 km/h • All screws are M8 stainless steel (V2A, rustproof) • Clear control panel with the most important data (tire pressure, cable arrangement, etc.) • Including 10-year Koch warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about any specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -