Used Javor Veneer Press for sale (12,725)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Itodpfezifpgsx Am Aol

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Itjdpfx Amjwd N Rmo Ael Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 21370-07-1268, functionality: fully functional, Available from April 1, 2027, for self-dismantling and self-collection. Itodpfjz Dai Uox Am Ael Langzauner heating press / veneer press, type LZT 100-SF, manufactured in 2007. The machine is suitable for pressing and gluing sheet materials, veneers, and comparable workpieces. It features heated press surfaces and a hydraulic pressing device. The upper and lower heating elements can be switched on separately. Technical data • Manufacturer: Langzauner • Type: LZT 100-SF • Year of manufacture: 2007 • Factory number: 21370-07-1268 • Heating: upper and lower heating • Temperature display: separate for top and bottom • Pressing time: adjustable • Opening time: adjustable • Automatic opening: available • Electrical connection: 3 × 400 V + N • Frequency: 50 Hz • Rated current: 42.2 A • Connected power: approximately 27 kW according to the nameplate • Hydraulic press with 6 press cylinders • Safety cable / safety device • Press surface heating plates in top condition, no damage • Heating plate size: 3,000 × 1,300 mm • Max. press opening / stage clearance: 400 mm • Total pressing force: 100 tons • 6 press cylinders • Electric heating plates

Condition: ready for operation (used), functionality: fully functional, stroke length: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, TECHNICAL DETAILS Press drive: Hydraulic Max. workpiece length: 3,000 mm Max. workpiece width: 1,300 mm Max. workpiece height: 450 mm Total stroke: 450 mm Iodpfxezxcmuo Am Aotl Number of cylinders: 6 Cylinder diameter: 70 mm Heating type: Oil-heated Max. temperature: 120 °C Separate heating for top/bottom: Yes MACHINE DETAILS Number of work areas: 1 Number of levels: 1 Plate material: Steel Main motor power: 2.2 kW Connected power: 10.0 kW Voltage: 400 V Fuse rating: 32 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,650 x 2,400 mm Weight: 3,500 kg Transport packages: 1 EQUIPMENT Heating boiler Note: The plates require repair. The plate on the lower bed is missing.

Condition: good (used), Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Itsdpjzz Szajfx Am Ael Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: good (used), Code: 0479 Brand: SIPA Model: S20F Ijdpfez Atwrsx Am Astl Hydraulic cold press for panels, doors, furniture, timber, composite materials, engineering materials, plastics, aluminium and other materials Steel frame Platen dimensions 2500 x 1300 mm Platens opening 500 mm Total pressure 20 t N° 2 cylinders diameter 40 mm Motor power 1,5 Hp Overall dimensions mm 2800 x 1300 x 2110 h Weight kg 740

Condition: refurbished (used), functionality: fully functional, Refurbished, four-piston hydraulic platen press of Italian manufacture. Branded veneer press for easy veneering of wood. Dimensions of veneer sheets: 2500 x 1300 mm Pressure at full area: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic pistons: 4 MYLAR Teflon film on the platens Preparation for heating the platens with water Option to install a hot water boiler Price: 6,630 EUR excluding VAT The condition after refurbishment and the machine's readiness for delivery must be verified in advance! Itodpfx Ameyi U Rne Ajl In stock in Telnice near Brno, Czech Republic. Testing, demonstration of the machine, and operator training are standard services.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Hot press Iodpjz Dp Hisfx Am Aotl Platen dimensions: 3000 x 1300 mm Total pressure: 120 tons Cylinders: 8

Condition: used, total length: 3,950 mm, total width: 1,500 mm, total height: 2,150 mm, Colour: Green Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Serial number: 19198 - Main motor power [kW]: 1.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3100 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 390 - Total stroke [mm]: 390 - Number of work zones [pcs]: 3 - Number of levels [pcs]: 3 - Plate material: Wood - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 80 - Total pressure [Ton]: 160 - Options: Disable partial cylinders - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3950mm x 1500mm x 2150mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Itjdpfxey Rq Efe Am Aol Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Itjdpfxoymmgij Am Asl Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 3/1406, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, Veneer press, Joh. Langzauner & Sons ----- Technical data ----- Isdpfx Aey Twrkem Ajtl Pressing area: 2,550 mm x 1,300 mm, Power per heating plate: 7,200 W, Number of cylinders: 4 pcs.

Condition: excellent (used), Year of construction: 1989, Veneer press Manufacturer: Bürkle Type: U60 Year of manufacture: 1989 Plate dimensions: 2,200 x 1,250 mm Opening width: 400 mm Pressing pressure: 60 tons Specific pressing pressure: 2.2 kg/cm² Heating: Electric Motor power: 0.75 kW Emergency stop device: Emergency stop cable Weight: 3,000 kg Dimensions: 2,750 x 1,380 x 1,785 mm Iedpfx Aeztnhmjm Aotl

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Itjdoyxp Twopfx Am Ajl Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: excellent (used), Year of construction: 2018, Veneer press, OMC Type PL 105 30/13 Year of manufacture: 2018 Dimensions: 2500 x 1300 Piston diameter: 6 x 85 Pressure: 3.2 kg/cm2 Weight: approx. 3300 kg Itedezx Sh Uopfx Am Ajl

Condition: ready for operation (used), Year of construction: 1988, Langzauner SF 120 Veneer Press 120 tons pressing force 8 cylinders 80 mm diameter Opening width 400 mm Connection value per plate 11.5 kW Iodpfx Amjztn Aqo Ajtl Weight 6100 kg Space requirement 3730 x 1550 x 1970 mm Temperature 130° C Year of manufacture 1988 Heating plates Goldeloxal. Note: the plates are not in good condition. Dent on the lower plate in the rear right section. Price 11,000.- Price with new Elkom Goldeloxal plates 17,000.-

Condition: ready for operation (used), plate length 3500mm Iedszxy N Tspfx Am Aetl plate width 1300mm water heating 8 hydraulic pistons pistons diameter 85mm plates span 640mm outomatic opening year 1992

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press 4 cylinders Pressing area 2500 x 1300 mm Electric heating Electric opening and closing Ijdox Dzvxjpfx Am Ajtl Pressing force 90 tons Year of manufacture 1994 Price 7,500.-

Condition: good (used), Code: 0120 Brand: ORMAMACCHINE Model: NPC/3000S - CE Standard Hot press with diathermic oil for wood, veneer, wood panels, coated panels, veneer, composite materials, cork, aluminium and various materials - CE Standard Platen dimensions mm 3000 x 1300 Thrust ton 70 N° 6 pistons Opening mm 400 Motor Hp 2 Heating with diathermic oil by electric boiler Mylar-coated platens Overall dimensions: mm 3600 x 1550 x 1900 h Isdpfjzil Ipjx Am Aotl Weight kg 3500

Condition: used, Year of construction: 1982, Pressing area: 2200mm x 1100mm Opening: 400mm Heating: electric Platen surface: aluminum Emergency stop: yes, pull-cord Pressing force: 60 tons Number of cylinders: 4 Power consumption: 16kW Machine length: 2500 mm Machine width: 1300mm Ijdezhm Dvepfx Am Astl Weight: 3000kg

Condition: used, Used Italpresse UT/6 hot press Itedezkt Tiopfx Am Aol for surface finishing by applying veneers to chipboard, plywood, MDF, solid wood, or plastic laminates, also suitable for aluminum and other metals. The press platens are solid plates made of perforated steel. Platen dimensions: 3000 x 1300 mm. Maximum opening: 400 mm. Platen heating is achieved with heat transfer oil and an electric boiler, complete with a circulation pump. Boiler: 27 kW - 380 V. Selector switch for using 50% of the boiler's power (13.5 kW in 1st position) or 27 kW in 2nd position. Pressing time can be set with automatic opening. Maximum pressure: 300 bar. Option to exclude 2 lateral cylinders from the control panel. Protective Mylar film on the platens. Machine dimensions: 3700 x 1700 x H. 2100 mm. Weight: 6600 kg. Machine complies with CE standards.

Condition: like new (used), Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic cylinders Clearance: 410 mm Iodpfxszxgx Ue Am Aetl Water heating system Safety shear pin

Condition: used, functionality: fully functional, ORMA NPC 6/100 veneer press Shelf length: 2500mm Itsdpfx Aez Dkkiom Ajl Shelf width: 1300mm Number of loading trays: 2 Hydraulic press, heated by water from the central heating system Operating pressure: 300 bar Press with 6 cylinders Cylinder bore: 100mm CE certified

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, working width 2700 mm working height 100 mm hydraulic cutting gauge adjustment to size Ijdpszxp U Eefx Am Ajtl cast body power supply 400V 3000 kg Year of manufacture 2004

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, plate length 3500mm plate width 1300mm Ijdszxp Swjpfx Am Astl solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm total pressure 160 tons safety line switch year 2002

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, operating hours: 5,000 h, pressing force: 200 t, table width: 1,400 mm, table length: 3,200 mm, total length: 3,200 mm, total width: 1,400 mm, total height: 2,900 mm, overall weight: 23,000 kg, operating temperature: 200 °C, workpiece height (max.): 150 mm, temperature: 210 °C, For sale is a virtually new veneer press with an infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of manufacture 1992). The machine is in excellent condition and has seen very little use. Machine type: Continuous press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of manufacture: 1992 Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Infeed: yes Conveyor belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Clearance height: approx. 100 mm Preheating temperature: 200° Heating capacity: 45 kW Heating medium: oil Pressing force: 200 tons The press machine is in top condition, has seen very little use, and has been used exclusively for development projects for the past 15 years. I would be happy to send you more information and pictures upon request. The machine is available immediately and can be inspected at any time by appointment. Self-collection only! Iedpfx Amjwnpcdo Aetl Functional video available upon request. If you are interested, I am happy to provide you with further information or arrange a viewing!