Veneer press

ITALPRESSE MARK C/ 14-27.5/2

Year of construction: 2009, condition: good (used), - Fully automatic - Package height max. (mm): 650 - Package height min. (mm) :15 - Package width max. (mm): 1250 - Package length min. (mm): 300 - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 Nedpfopu Anmjx Ah Sjdc - Total connected load (kW): approx. 5

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel Ndedpfx Asd Tyvxoh Soc - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Ndedpfxsv Sthgo Ah Sjc Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, machine/vehicle number: 008728, Max working length: 3000 mm Nsdpfxezylwfo Ah Sedc Max working width: 1300 mm Heating System: electric No of Pressing cylinders: 6

Condition: used, functionality: unexamined, Ferwood Code: RU0008671 - Dimensions: 6500X1100X250 mm - Rollers L=600 mm - Condition: Used - Functionality: Not tested - Compatible machine: AUTOMATED LOADING AND UNLOADING HOMAG - BIESSE - SCM - IMA. If interested, we offer an overhauling service. Contact us. Ndsdpfx Ahev Hglzj Soc

Condition: reconditioned (used), functionality: fully functional, Veneering press line for wood, consisting of the following machines: - OSAMA S2R adhesive applicator - 1300 mm - NEW MACHINE - Feeder from the adhesive applicator to the conveyor - Infeed conveyor, 6000 mm long x 950 mm wide, with drive - ORMA 5100x1400 mm surface hydraulic press - 12 pistons, hot water plates, refurbished - Outfeed conveyor, 6000 mm long x 950 mm wide, with drive This press requires medium to high pressure for operation to ensure that the boards are 100% flat. Dimensions of veneering boards: 5100 x 1400 mm (solid, drilled steel boards) Board opening: 180 mm Pressure at full surface: up to 10 kg/cm2 Number of hydraulic pistons: 12 pcs - piston diameter 140 mm Teflon MYLAR film on the boards Preparation for heating the boards with hot water - without a boiler Machine dimensions: 2300 x 5100 mm x height 2500 mm The machine has been completely refurbished, adjusted, and tested. Price: EUR 49,000,- excluding VAT, without the OSAMA adhesive applicator Price: EUR 58,000,- excluding VAT, including the OSAMA adhesive applicator Ndodpfxovva Sye Ah Ssc

Condition: as good as new (ex-display), Gravity roller conveyor for pallets and metal boxes (3-lane),4.26 m, Brand new condition (without warranty) Manufacturer / System: ELD Raktártechnika Type: Gravity roller conveyor / gravity lane 3 item in stock Transportable unit: Pallet, metal box, storage container, and other custom loads Ndodpszr Hv Tofx Ah Soc Length: 4264 mm (Sections: A2 L=1768 mm + C L=2496 mm) Installation width (EL): 850 mm Usable width (CW): 810 – 812 mm Overall width: 930 mm Roller pitch: 78 mm Conveyor slope: 4% Load capacity (per unit): Minimum 120 kg when using brake rollers Maximum 720 kg (Max. weight ratio 1:4) Finish / Material: Galvanized and painted steel frame (Grey RAL 7005 / Yellow RAL 1021) Features: - Integrated brake rollers (with speed control against load acceleration) - 2 stop elements - Manually released intermediate stop (with yellow operating lever) - Entry guide plates (yellow) and side guide rollers - End stop Operating temperature: 0 – 45 °C (dry warehouse environment)

Condition: excellent (used), Cutting height: 210 cm Ndodpfx Aozi Dm Rjh Sjc Cutting length: 500 cm Cutting depth: 60 mm Engine: 4 kW Overall dimensions: Length 600 cm, Height 300 cm, Width 160 cm

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 157090207, functionality: fully functional, pressing force: 180 t, stroke length: 325 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm MACHINE DETAILS Control: Electronic control with operating panel/CNC Ndodpfxeznmb Ij Ah Sjc Voltage: 400 V / 50 Hz Design: Industrial design EQUIPMENT Enclosed safety cabin Hydraulic press system Heating plate press Molding press