Used Jet Radial Drilling Machine for sale (66,788)

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Gjdpfx Ajytb Eysayekb Year of manufacture: 1995

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light Gjdpey Nd T Hefx Aayjkb - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 320 - 1.220 mm workpiece height max. 330 - 1.170 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 1300 x 980 mm threading 42 M quill stroke 335 mm total power requirement 4,0 kW weight of the machine ca. 3000 kg. range L-W-H 2035 x 1000 x 2830 mm Furnishing: - Large-sized base plate, ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good gliding ability of the drill head on the boom - sanded surface Scope of delivery: - Cube table Gkodsxaaabopfx Aayjb - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 60,0 mm arm length 350 - 1.600 mm workpiece height max. 665 x 1.250 mm turning speeds 38 - 2.000 U/min spindle taper MT 5 MK base plate 960 x 1.760 mm threading 42 M quill stroke 325 mm total power requirement 4,0 kW Gksdpfx Aoxaa H Uoayob weight of the machine ca. 3.800 kg. range L-W-H 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 350 - 1.590 mm workpiece height max. 645 - 1.240 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 980 x 1.600 mm threading 42 M quill stroke 320 mm total power requirement 4,0 kW weight of the machine ca. 3.500 kg. range L-W-H 2450 x 980 x 2840 mm Description : - Large-sized base plate Gsdpfx Aajxaad Teyekb - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 32,0 mm arm length 310 - 820 mm workpiece height max. 370 - 870 mm turning speeds 75 - 1220 U/min spindle taper MT 4 MK base plate 825 x 690 mm threading 24 M quill stroke 250 mm quill feed 0,1/0,16/0,25 mm/U travel x / y 500 / 510 mm total power requirement 2,25 kW weight of the machine ca. 1200 kg. range L-W-H 1470 x 750 x 2100 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 Gksdpjxabrlefx Aayjb - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 40.0 mm threading 30 M workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min column diameter 220 mm column diameter 220 mm table surface area 1210 x 510 mm quill stroke 200 mm feed range - spindle 0.08 - 0.50 mm/U total power requirement 2.2 kW weight of the machine ca. 2800 kg dimensions of the machine ca. 2450 x 1200 x 2720 mm Gedpfx Aaoxaadyeyokb characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Condition: good (used), Year of construction: 1955, Radial drilling machine, drilling machine, boom drilling machine -Projection: 2055 mm -Max. distance from machine table to spindle mount: 1700 mm -Conical mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm Gsdpsd Enr Iefx Aayskb -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -Automatic feed: 0.037-2.0 mm/rev -Clamping surface: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Condition: used, y-axis 1.000 mm table dimensions 1.000 x 600 mm bore depth 150 mm bore diameter 32 mm spindle tunring speed 30 - 2.650 U/min output 6 kw In our assessment, the machine is in good used condition and can be inspected under power by appointment. Godpfx Aajzz S Nkoyjkb Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), table mounting size: 400 x 1500 mm table movement x: 1130 mm table movement y: 320 mm table movement z: 430 mm spindle taper: ISA 50 spindle turning speed range: Horizontal-/Vertikalspindel 32-1500/25-1200 rpm carriages longitudinal and cross: 15 - 600 mm/min carriages vertical: 6 - 240 mm/min space needed: 4000 x 1250 x 4100 mm weight: 12000 kg Gjdpfx Aaeg A Inwoyskb

Condition: used, Year of construction: 1988, Radial drilling machine Manufacturer: Tai Pin Type: TPR 1230 Year of manufacture: 1988 Drilling capacity in steel: Ø 42 mm Drilling capacity in cast iron: Ø 55 mm Thread cutting (steel/cast iron): M25 / M38 Gsdpoznvibjfx Aayekb Overhang (column to spindle center): 330 – 1,230 mm Spindle stock travel: 880 mm Column diameter: 300 mm Tool holder: MK 4 (Morse taper 4) Quill stroke (spindle stroke): 270 mm Spindle speeds: 12 steps, 37 – 1,253 rpm (at 50 Hz) Automatic feeds: 3 steps (0.05 / 0.09 / 0.15 mm/rev) Distance spindle – base plate: 467 – 1,360 mm Outrigger height adjustment: 620 mm 9926ä

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Gksdpfx Aezza Nxoayob Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Overhang: 430 - 1000 mm Gedpfx Aajzhualsyjkb Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump - Thread cutting device - Drilling depth stop - Drill chuck

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Gkjdpfx Aasuxrtfjyeb Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 Gjdpfx Asp Atipsayekb feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: HG-1020-5571, The machine shown is a HEBÖ RBV-12SV pipe drilling machine with extensive accessories. The machine is designed for the processing of pipes and profiles and is used as a semi-automatic pipe drilling machine. According to the manufacturer, it is suitable for applications in, among other things, railing construction, shelving system construction, and the furniture industry. The processing can include drilling, reaming, core drilling, and thread forming. The RBV-12SV has an automated processing sequence after manual clamping of the workpiece. Technical specifications according to the data plate of the machine shown: Manufacturer: hebö Maschinenfabrik GmbH Machine type: RBV-12SV Gsdpfxszypgdo Aayekb Machine number: HG-1020-5571 Year of manufacture: 2020 Voltage: 400 V Frequency: 50 Hz Power: 5 kW Current: 11.5 A Weight: 555 kg The manufacturer's specifications for the RBV-12SV also include a speed range of 0–2,250 rpm and a feed rate of the drilling unit of 0–300 mm/min. Depending on the model, pipes up to 3" or 88.9 mm, square profiles up to 80 × 80 mm, and other profile shapes can be processed. Optional: with mounted pneumatic/manual thread drilling device CMA LCN 12 with compressed air drilling unit (yellow attachment).

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, arm length 2150 mm, drilling capacity 80 mm weight 7000 kg Godpfsyzq Dpsx Aayskb

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM universal head Gksdovm Akgjpfx Aayeb portable radial

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 50 mm arm length / mm Gksdpfx Aswt Dwasayjb workpiece height max. / mm Table dimensions: 1200x580mmTable dimensions: 1200x580mm

Condition: used, bore capacity in steel (diameter) 32 mm Gksdpfx Aajzwg Rujyeb arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 45 - 1370 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Gkodpfoz Ad Rcox Aayjb Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Gkedpfx Asvylh Ujaysb Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 32 mm arm length ca. 920 mm Gkedeztf Aujpfx Aaysb

Condition: good (used), WMW HECKERT BR 40/2 x 1250 radial drilling machine - Arm length: 1250mm - Maximum drilling diameter: 40mm - Morse taper: MK5 Gkodpezury Nefx Aayjb - Minimum speed: 20 RPM - Maximum speed: 1200 RPM - 3-speed gearbox with variable speed control - Dimensions of drilling head: (L x W x H) 710 x 710 x 500mm - Weight: 3000KG - Automatic feed - Dimensions (L x W x H): 2100 x 1000 x 2900mm

Condition: ready for operation (used), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (infinitely variable) Feed: infinitely variable approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column stroke (W): 410 mm Arm traverse: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued (a valid VAT ID number is required). Gjdsyrdc Sjpfx Aayjkb Interim sale reserved. Visit our shop and take a look at our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in the item description are reserved.