Radial drilling machine

mas VO63

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 Dcodpfjv Hygfsx Ab Dsl A second ironing dryer of a similar design is available.

Year of construction: 1992, condition: good (used), machine/vehicle number: 03.323.36002, Item No. 22621 Djdpfx Ajip Nikob Decl Technical Data: - Max. working length 3500 mm - Distance between columns 3050 mm - Max. pressing force 2000 kN - Distance table / ram max. 480 mm - Column overhang 260 mm - Ram stroke approx. 300 mm - Stroke speeds - Downward speed, no load max. 100 mm/sec - Upward speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg - including: - CNC control CYBELEC, renewed in 2008 - Controlled crowning device - Controlled rear backstop with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die set - Material supports - Two-hand control panel

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Used, untested robot. No technical documentation available. Not tested. Dodpfx Abjgu U Ite Docl

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours Dcjdpfx Aeytpbisb Del • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dodpfxjy Hq Dys Ab Djcl

Condition: used, Year of construction: 2012, machine/vehicle number: A0100-80069, functionality: fully functional, operating hours: 4,660 h, Equipment: documentation/manual, We are offering this used Hennecke ELASTOLINE F elastomer casting machine, year of manufacture 2012. The machine is in good used condition. Djdpfxjx R Thce Ab Djcl If you have any questions or require further information, please write to us or give us a call.

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 4500 mm Djdpfx Asv Hx R Neb Decl 2 tool posts included with the machine Weight approx. 22 tons Video of the machine in operation available!

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic Dcedpoyzim Ajfx Ab Dol -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: new, For sale: a stock of new engines, approximately 1,500,000 kg. Sale in batches. Minimum order quantity: 50,000 kg. All engines are either new or used, but refurbished. Approximately 3,000 units. Dcjdpfx Aozgu D Ieb Djl Various manufacturers: Siemens, ČKD, MEZ, etc. Price per 1 kg: 1.50 EUR.

Condition: new, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design for optimized loading area length, approximately 3,700 mm long -Gooseneck with rear bevel approximately 1,000 mm x 10° Loading Platform: -Loading platform in extendable design, approximately 8,800 mm long, with bevel at the rear approximately 500 mm x 10° -Recess in the loading platform and into the bevel for accommodating the excavator arm -Pneumatic locking system with tapered locking pins and reinforced locking positions -Hardwood decking on the bevel of the loading platform Ramps: -1 pair of two-part steel ramps with a length of approximately 4,350 mm and a width of approximately 900 mm -Ramps with hardwood decking -Hydraulically folding ramp ends -Ramps can be individually hydraulically moved outwards by approximately 235 mm and inwards by approximately 215 mm -Square ladder strips 20 x 30 mm, approximately every 200 mm on the outer frame of the ramp Axles and Suspension: -BPW axles and suspension, 1st axle with steering knuckle, all other axles with hydromechanical forced steering -Technical axle load: 12,000 kg -1st axle with electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Tires 235/75 R 17.5, twin tires -TPMS tire monitoring system according to ECE R141 -TPMS tire monitoring sensors mounted in all wheels including spare wheel Included accessories: -Steel front wall, plug-in, approximately 400 mm high -3kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches -Parking position on the gooseneck for the warning signs when not in use -1 spare wheel -On the gooseneck, 1 pair of plug-in aluminum sideboards, approximately 400 mm high, anodized -On the gooseneck, 1 plug-in aluminum rear wall, approximately 400 mm high, anodized -Approximately 40 mm thick hardwood decking above the gooseneck, checkered plate decking above the kingpin -2" kingpin -Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide -4 chock blocks -Mechanical landing gear with 2-speed gearbox and crank -JOST Module B – static test load = 50,000 kg -1 intermediate table, approximately 300 mm wide -Extensions (galvanized), extendable by approximately 230 mm on each side -Wheel recesses with square ladder strips -Aluminum covers for the wheel recesses -1 pair of mechanical rear supports -Steering assistance at the front and rear, operable via cable remote control, with single-axle monitoring Dcodpfek Aht Usx Ab Dsl -1st axle with automatic lift axle function -Central lubrication system with 1 pump, brand BEKAMAX -Wireless remote control for operating the steering assistance, in addition to the cable remote control, with 2 indicator lights on the receiver for single-axle monitoring -Wabco Smart Board system -4 warning signs, approximately 423 x 423 mm, extendable by approximately 400 mm, incl. 2 position lights and mounts for rotating beacon