Used Kia Centre H63 for sale (3,819)

Condition: excellent (used), Year of construction: 2004, Used Kia Model Kia Centre H63 Twin Pallet Horizontal Machining Centre with 60 Station ATC and Fanuc 18M Control. Serial Number KH630216. Year of Manufacture 2004. MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle • Shuttle Type Pallet Changer • Pre-Tensioned Double Anchored Ballscrews • Fanuc 18M Control with 15 Inch Colour Screen • 20 Bar ‘Cool-Jet’ Through Spindle Coolant • Set of BT50 Toolholders • Filtermist FX5002 Mist Filtration • Frontal and Side Operators Platforms TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM 0bwkk Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Bodpfx Aleu A Ut No Iodb Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper NT #50 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEARED HEADSTOCK FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type BT #50 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415V / 3PH / 50HZ MACHINE Floor Space (L x W) 3,610 X 5,320 MM Height 3,140 MM Weight 14,000 KGS

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Bdedpfx Alju A Td Ts Iob Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Bdedelrqiqspfx Al Ieb Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: new, mileage: 35 km, fuel type: electric, overall weight: 2,650 kg, fuel: electricity, color: white, driver cabin: other, gearing type: automatic, number of seats: 2, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, navigation system, onboard computer, 22% = €9,905 price advantage off the factory list price incl. VAT: €45,005. All our FIAT vans can be retrofitted with a tow bar for an additional charge! THE LARGEST FIAT VAN EXHIBITION IN HESSEN. We deliver your FIAT free of charge right to your doorstep! Nationwide! Nationwide registration with personalized license plate €169. Over 100 vans in stock, available immediately! German vehicle, not a reimport = 100% security. New car extended warranty up to 96 months or 200,000 km available for an additional charge! Buy conveniently online at: Heat pump for interior climate control. Assistance systems: Rear parking sensors, reversing camera, forward collision warning, drowsiness detection/attention assist, speed limiter, cruise control, hill start assist, light sensor, rain sensor, front parking sensors, intelligent emergency call, lane keeping assist. Lighting: LED headlights, LED daytime running lights. Media & Infotainment: Navigation/online navigation, touchscreen display, radio, DAB tuner, USB interface, Bluetooth interface, handsfree system, Apple CarPlay/preparation, wireless smartphone charging, Android Auto/preparation. Safety & Technology: Electronic Stability Program (ESP), passenger airbag, driver airbag, front side airbags, anti-lock braking system (ABS), immobilizer. Comfort & Climate: Keyless entry, onboard computer, electric mirrors, electric windows, automatic climate control, central locking with remote control, seat heating, center armrest, right side sliding door, power steering, heat pump. Tires & Wheels: Tire repair kit, tire pressure monitoring. Interior & Design: Heated steering wheel, virtual instruments, shift paddles on the steering wheel, multifunction steering wheel. Environment & Charging: CCS Combo charging plug, Type 2 charging plug, Emissions sticker class 4. Transmission: Automatic. Further information: Battery purchased, non-smoking vehicle, partition wall. TOP financing & leasing conditions also possible without down payment. We calculate your desired rate directly by phone – your preferred term and final installment. Instant credit decision! Used car trade-in including old loan redemption. Reservations not possible due to special offer prices. DEKRA workshop test award (4 years in a row). Call us now or visit us today, 20 km north of Frankfurt/Main, directly on the A5. We look forward to seeing you and would be happy to convince you in person over a relaxed cup of coffee. We look forward to seeing you and would be happy to convince you in person. Bdsdey Ihicspfx Al Ijb

Condition: used, Year of construction: 2006, operating hours: 3,010 h, total height: 2,300 mm, total length: 2,850 mm, total width: 2,150 mm, Empty weight: 6.000 kg Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Bdodpfx Alsxbq U Ej Ieb - Operating hours: 3010 - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Fanuc - Control system type: Oi-MC - Power [kW]: 11.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 530 - Z-axis travel [mm]: 510 - Table length [mm]: 1200 - Table width [mm]: 510 - Tool holder: ISO40 - Max. spindle speed [rpm]: 10000 - Options: Chip conveyor, Tool magazine - └ Tool magazine [pcs.]: 24 - Tools included: Yes - Transport dimensions: 2850mm x 2150mm x 2300mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, mileage: 99,870 km, power: 136 kW (184.91 HP), fuel type: diesel, gearing type: automatic, first registration: 09/2017, next inspection (TÜV): 03/2027, emission class: euro6, color: black, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, * GT-Line * All-wheel drive (switchable) * Leather upholstery * 6-speed automatic transmission * Bi-Xenon headlights * Park Distance Control (PDC) front and rear with reversing camera * Blind Spot Assist * DAB radio * Navigation system * 2-zone automatic climate control * Leather multifunction steering wheel with paddle shifters * Heated seats * Ventilated seats * 19" alloy wheels * Electric tailgate * Cruise control * Rain sensor * Light sensor * Electrically adjustable seats * Heated steering wheel * Automatic high-beam assist * Roof rails * Lane change assist * 4x electric windows * Electrically adjustable, heated, and folding exterior mirrors * Drive mode selector * Center armrest with storage compartment * Lane Departure Alert (LDA) * Privacy glass * Hill start and descent assist * Fog lights * JBL sound system * Fog lights * LED daytime running lights * Park assist * Lumbar support * On-board computer * Wireless charging for smartphones * Traffic sign recognition * Rear bench seat, split-folding * Child safety system "ISOFIX" * Central locking with remote control and 2 keys * Full service history Vehicle number: 125 WhatsApp No.: You can find more vehicle offers at: ONLINE CONSULTATION / ONLINE VIEWING / ONLINE SALES CONTRACT / TRADE-IN OF YOUR USED CAR OR COMMERCIAL VEHICLE / DELIVERY AVAILABLE FOR AN ADDITIONAL CHARGE Delivery service available upon request. Foreign customers have the option to make a partial payment and collect the vehicle at a later date. NET export possible (for vehicles with VAT shown). Bdedpoy Aqttefx Al Ieb ---- We are happy to handle the vehicle registration (Düsseldorf) as well as issuing customs/export plates or temporary registration plates (5 days). Complete export processing possible (export declaration). ----Vehicles with used car inspection report (TÜV) possible. ----On request, we can offer you our GPG used car warranty with individually tailored solutions for you and your vehicle. ----Trade-in accepted. ----For further questions, please do not hesitate to contact us by phone. Opening hours: Monday – Thursday 09:00 - 16:30, Friday 09:00 – 16:00 ----Changes, errors, and prior sale reserved. Offers are non-binding. All information provided without guarantee. Vehicle descriptions do not constitute guaranteed specifications.

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 Bdsdep T Ulzepfx Al Ieb CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: FANUC, controller model: 21‑i TB, This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of axes: 4 (x, z, c, b) /x axis travel: 221 mm /z axis travel: 549 mm • Max. Machining diameter: Ø 254 mm/ max. Machining length: 531 mm Bdjdpfx Aljyaln Ej Iob • Tool magazine: 12 positions • Equipment: chip conveyor /bar feeder: top automazioni mod. Magic

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Bjdpfx Ajxdxhrol Isdb Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 100000997, operating hours: 50 h, CONDITION LIKE NEW. OPEN FRONTED VERTICAL MACHINING CENTRE WITH 4 SHEAR HARDENED & GROUND BOX GUIDEWAYS, ENHANCED ACCURACY & CUTTING PERFORMANCE. TABLE Working Surface - 1,150 X 600mm Tee Slot (Size x Number x Pitch) - 18mm X 5 X 120mm Maximum Table Load - 700 kg TRAVEL Longitudinal Travel ( X-Axis) - 1,000mm Cross Travel (Y-Axis) - 600mm Vertical Travel (Z-Axis) - 630mm Distance from Table Nose to Table Top - 100 – 730mm Distance from Spindle Centre to Column - 650mm SPINDLE Spindle Nose Taper BT-40 Spindle Speed - PULLEY DRIVEN (STD.) - 8,000 RPM GEAR DRIVEN - 6,000 RPM FEED Cutting Feedrate - 12 M / Min Rapid Traverse (X and Y-Axis) - 20 M / Min Rapid Traverse (Z-Axis) - 20 M / Min Bdodohzxwkopfx Al Ieb ATC Tool Storage Capacity - S TYPE 20 (STD.) Tool Change Type - RANDOM Maximum Tool Weight - 6 kg Maximum Tool Diameter - S TYPE Ø95mm Maximum Tool Length - S:250mm Tool Shank - BT-40 Pull Stud Bolt - MAS P40T-1 MOTOR Spindle Drive Motor (Fanuc) (30 min) - 7.5 (STD.) kW ACCURACY Positioning - ± 0.005mm Repeatability - ± 0.003mm POWER SUPPLY Electric Power Consumption - 20 KVA Air Pressure - 6.5 KG / CM² Voltage - 415V / 50HZ / 3PH MACHINE Floor Space (Fully Guarded) - 2,900 X 2,640mm Height - 2,890mm Weight - S: 6,500 / A:6,700 kg FANUC 0IMF PLUS CNC STANDARD SUPPLIED MACHINE FEATURES • Fully Enclosed Splash Guard • Work Lamp • Spindle Air Curtain • Air Blast Through The Spindle • Automatic Lubrication System • Levelling Bolts And Blocks • Coolant Jets Around The Spindle • Operation And Programming Manuals • Tool Box • Electrical And Mechanical Manuals • Operation Finish Lamp • Automatic Power Off • Cooling System • Heat Exchanger In Control Panel

Condition: used, Elumatec SBZ 130 Profile Machining Centre with 4 Axes Industrial PC Control, 6.7 Bed Working Length, 8 Position Tooling Turret, Live Tooling Capacity, BT30 Spindle Taper, Max Travels: X = 6700mm at 60m/min, Y = 380mm at 30m/min, Z = 265mm at 30m/min, Max Speed 6000rpm. S/No. 20053/2003/10. Country of Origin: Germany Location: These lots are located in High Wycombe, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Bdsdjy H H Egspfx Al Iob

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: G70303, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Bodpey Hh Ivjfx Al Iodb Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 16mm Bed length between centres 1250mm Spindle speeds (16) 25-2000rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. weight 1800Kg Machine in Metric execution MACHINE EQUIPPED WITH Newall 2 axis DRO System 3 Jaw chuck Quick change toolpost and 3-off toolholders Stationary steady Chuck guard Coolant system Rear splashguard

Condition: excellent (used), Year of construction: 2007, Mazak Vertical Centre Nexus 510C-II Year of Manufacturer: 2007 Mazatrol Matrix Nexus controller Swarf Conveyor Selection of tooling x10 Renishaw Probe 4th Axix prepped BT40 tooling 30 station magazine 12000 rpm main spindle Bdodpfx Asvyhndsl Ijb full set of manuals axis clamps tool length measuring system EIA/Mazatrol programming This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: good (used), Year of construction: 1999, operating hours: 1,887 h, functionality: fully functional, machine/vehicle number: 142031, spindle speed (max.): 5,000 rpm, Mazak Super Quickturn 200 (1999). Serial Number: 142031. Date: 1999. Weight: 5000kg/11,000lbs. Mazak tooleye measuring system. Tailstock. Swarf Conveyor. Parts Catcher. 12 Station Turret. Mazatrol PC-Fusion- CNC 640T control panel. Main Spindle Max 5000RPM. Collet Chucks and Collets. Bodpfx Astz A Dfsl Ijdb Hydrafeed barfeeder NOT included. This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: excellent (used), Year of construction: 2014, operating hours: 6,628 h, machine/vehicle number: 257592, Mazak Vertical Centre Smart 530C (2014) with Matrix Nexus 2 Control Serial Number: 257592 Very low operating hours: 6628 Through coolant Swarf conveyor Renishaw Probe Filter mist coolant extraction Mazatrol tool length measuring system EIA/Mazatrol programming High speed machining option Programme memory expansion 30 tool magazine CAT40 tooling 12,000 rpm main spindle Full set of manuals Bodpsv D E Enofx Al Iedb This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 175118, operating hours: 3,203 h, spindle speed (max.): 12,000 rpm, Mazak FJV-200 (2005) Serial Number: 175118 Through Coolant BT40 Tooling Mazatrol 640M control 30 Tool magazine 12,000 rpm main spindle full set of manuals Bsdpfov Txpljx Al Iodb This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: excellent (used), Year of construction: 2007, operating hours: 2,770 h, machine/vehicle number: 199581, Mazak Vertical Centre Nexus 510C-II (2007) 4th axis Serial number: 199581 Low working hours: 2770 Matrix Nexus control Kitagawa 4th axis EIA/Mazatrol Control Mazatrol tool length measuring system Through coolant CAT40 tooling 12,000 rpm main spindle Bedpfxov D E Iij Al Ijdb Full set of manuals This item is physically in stock and can be seen in full working order, at our showroom. Delivery and installation can be arranged at extra costs.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: SMK00004, SPECIFICATION X Travel 1020mm Y Travel 610mm Z Travel 620mm Table size 1200 x 600mm Spindle to table 140 – 760mm Spindle speed 12,000rpm Bdedsy E I A Djpfx Al Ijb Spindle motor 15kW Spindle taper BT40 Tool magazine capacity 24 Machine weight 8000Kg Footprint (W x D x H) 3650 x 2900 x 2900mm approx. MACHINE EQUIPPED WITH: - Siemens 840D CNC control (with Shopmill) Swarf conveyor 4th axis Renishaw tool setting probe Through spindle coolant system Lighting Enclosed guarding

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Bsdpfx Asx D Dzwel Isdb Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Spindle Speed 12000 RPM Bdsdpox D H T Aefx Al Ieb Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Year of construction: 2019, condition: ready for operation (used), This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types Bedpfx Aljx S Si Io Ijdb CNC Wood Machining

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Bdsdpsu A U Nkefx Al Ijb Machine Weight 12,600 KG

Condition: used, Year of construction: 2007, Mazak Nexus HCN 6000-II Twin Pallet Horizontal Machining Centre. S/No. 196442 (2007) with Mazatrol Matrix Nexus Control, Pallet Size 500 x 500mm, 60 Position ATC, High Pressure Coolant & Filtration System, Through Spindle Coolant, Spindle Speed 7000rpm, Spindle Taper CAT40, Rinishaw Tool Setter, Swarf Conveyor. Please Note: Back-End Spindle Tool Holders Only, Consumable Tools Not Included. Country of Origin: Japan Bdedoyzhfdepfx Al Isb Location: This lot is located in Bornago, Italy. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Hurco VMX50i (2014) 3-Axis Vertical Machining Centre Control: Hurco WinMax Travels & Capacity X Axis Travel: 1270 mm Y Axis Travel: 660 mm Z Axis Travel: 610 mm Bdedpfxoyx H Rto Al Isb Table Size: 1500 x 660 mm Max Table Load: 2000 kg

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control CNC SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Bdjdpfjy Hl Iyex Al Ijb Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)