Used Koch Khz 5000 for sale (2,805)

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Lajdpfx Aer Nfvmsifsd Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 110362L0 / 110363L0, PKM Packaging GmbH / KOCH Pac-Systeme GmbH – Fully Automatic Packaging Line for Pharmaceutical and Medical Device Products For sale is a high-quality, fully automatic packaging line from the German manufacturer PKM Packaging GmbH / KOCH Pac-Systeme GmbH, manufactured in 2012. The system was developed for demanding secondary packaging processes and is ideally suited for pharmaceutical products, medical devices, diagnostics, healthcare, cosmetics, and similar industries with high quality requirements. The line consists of two interconnected machine modules and handles the complete packaging process – from the automatic erection of folding cartons to product placement and grouping, as well as sealing, labeling, check weighing, and the rejection of defective packaging. The modular design allows for flexible adaptation to different product and packaging formats. The first machine module features an automatic carton erector with a carton magazine, servo-controlled carton feed, folding and erecting station, insertion and transport line, and integrated control stations. The second module includes the collation packer with product grouping, pre-folding station, lifting and transfer system, carton insertion, carton closer, as well as transport and conveyor systems to the discharge point. The high-quality equipment includes an integrated Mettler Toledo Garvens XS3 check weigher (weighing range 7–700 g, resolution 0.1 g), a BLUHM label printing and dispensing system, a Wolke m600 inkjet marking system, and several camera and inspection systems for controlling print quality, labels, and packaging quality. Defective products are automatically detected and rejected. Operation is carried out via several modern industrial touch panels with graphical system visualization. The PLC control system features recipe management, user management, fault diagnosis, message storage, and modern servo drive technology with EtherCAT communication for precise and reliable production processes. The complete system is fully enclosed and equipped with interlocked safety doors, emergency stop devices, safety monitoring, and optical signal towers, meeting high requirements for operator and system safety. Technical data: Lajdpfxjzmp Tqo Aifjd Manufacturer: PKM Packaging GmbH / KOCH Pac-Systeme GmbH Year of manufacture: 2012 Machine numbers: 110362L0 / 110363L0 System configuration: 2 machine modules Operating voltage: 400 V AC Frequency: 50 Hz Connected load Module 1: 6 kW Connected load Module 2: 3 kW Compressed air: 6 bar Enclosure type, control cabinet: IP44 The scope of supply includes the complete packaging line with carton erector, insertion and packaging line, collation packer, carton closer, transport and conveyor systems, check weigher, labeling and marking systems, camera and inspection technology, control cabinets, and the existing technical documentation with electrical diagrams, pneumatic diagrams, drawings, and parts lists. The system is in very good condition and is currently located in a pharmaceutical plant. Inspections are possible by appointment. Functional videos, further technical documentation, and information on dismantling, packaging, and worldwide shipping are available upon request.

Year of construction: 2003, condition: ready for operation (used), A complete central plastic granulate drying and conveying system Werner Koch, which was extensively expanded and modernized in 2021, is available. 1) Koch CKT 300 dry air dryer, year of manufacture: 2003, power: 41kW, air capacity: 300m³/h. 2) Koch CKT 500 dry air dryer, year of manufacture: 2021, power: 51kW, air capacity: 500m³/h, control system: Siemens S7. 3) 26x drying hoppers, volume: 11x40l, volume: 13x100l, volume: 2x150l. 4) 38x machine hoppers. 5) 2x Busch vacuum pumps. 6) Automatic Koch Navigator material distribution system, inputs: 26, outputs: 38. Including control cabinets and a central visualization and monitoring system Supervisione 9-7000. Documentation available. An on-site inspection is possible. Laodpfx Ajzmyl Djifed

Condition: excellent (used), Year of construction: 2021, Silos 120 x 120 x 141 cm [L x W x H] with a capacity of approx. 1000 l complete with Koch Technik plastic feeders for the central system, 3 pcs. 2008, 2010, 2021. Lsdpfxjzl Szue Aifoad

Condition: good (used), Heckler&Koch AM443 including Heidenhain digital display Ljdszk Uznjpfx Aifoad Travel distances: X 390mm Y 330mm Z 380mm Table surface area approx. 850x400mm Table load max. 200kg Spindle speed range 63-2800 rpm Gear stages 12 Feed rate 0-1500 mm/min Tool holder SK40 Draw-in thread S20x2 Machine weight approx. 1900kg The machine is in very good condition. Equipment/Accessories: - Heidenhain digital display - Coolant system - Machine light - Various tool holders and collets - Machine vise

Condition: excellent (used), Year of construction: 2017, Koch Technik safety (protective) filter type SA3. Lodpfx Aezkutdeifoad Its main tasks are: -Vacuum pump protection: Protects blowers and suction pumps against the ingress of fine dust, plastic residues or impurities that could lead to engine failure or seizure -Material dust removal: Filters return air from feeders and material separators, ensuring the cleanliness of the entire pneumatic system. These devices are usually installed in transfer lines before the vacuum generator (pump), most often in granulate dryers (e.g. CKT series) or central raw material feeding systems for injection molding machines and extruders. 4 pieces available - years 2008, 2008, 2010 and 2017 Sold complete with 4 Koch pumps and controls

Condition: like new (used), Two like-new soundproof enclosures, each designed to house four Busch pumps from Koch Technik, are for sale. Price per unit: €950 If both enclosures are purchased, the total price is €600. The original invoice from Koch is attached below in the documents. Ledpfjy Tt Dpjx Aifoad

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Laedpfoyatkbox Aifsd Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Lsdpozbunkofx Aifjad Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: used, Year of construction: 2014, power: 75 kW (101.97 HP), controller model: BECKHOFF CONTROL, The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Number of upper units: 4 With positioning via NC: yes Lateral horizontal groups: yes Upper vertical units: yes Horizontal units: yes Number of upper vertical units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for vertical drilling: 112 Number of lateral horizontal units: 4 With positioning via NC: yes With "Z"-axis positioning via NC: yes Spindles for horizontal drilling: 12 MACHINE DETAILS Ljdpfx Aszf Ibwsifead Control: BECKHOFF CONTROL Total installed power: 75 kW EQUIPMENT Protective grid attached to the machine Safety light barriers Automatic waste disposal system The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 8649

Condition: used, machine/vehicle number: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes Lasdpfx Ajy Nkmmsifjd

Condition: good (used), Approx. 221 Corlettes / Multi-Boxes, width 2m / 2.50m / 2.70m, partly stackable - used - : Prices (net) per unit ex location: €149 Price (net) Type 3 – stackable: €169 per unit, ex location! Manufacturer: Cordes und Koch Type: Corlette / Multi Box Dimensions (L × W × H in cm) Type 1 = 13 units (only sold as a complete lot) 250 x 115 x 180 Colour: blue Type 2 = 2 units 270 x 115 x 240 Colour: green Type 3 = 192 units, approx. 62 stackable Minimum purchase: 10 units 200 x 115 x 180 Colour: blue Type 4 = 14 units (only sold as a complete lot) 270 x 115 x 188 Colour: green Lsdpfx Aijxc E Hljfjad Condition: good Available: immediately Location: 63128 Dietzenbach

Condition: good (used), functionality: fully functional, load capacity: 500 kg, Welding turntable, L-manipulator, positioner, in excellent condition, includes additional clamping plate. Rotating and tilting (overhead), steplessly adjustable speed. Mechanical height adjustment from 800 mm to 1100 mm. Outreach 1000 mm. Overall height 1800 mm. Length 3000 mm. Width 1100 mm. Clamping plate diameter 1000 mm. Laodsylkn Ijpfx Aifsd

Condition: used, functionality: unexamined, Dear Sir or Madam, We are pleased to offer the following machine for sale: Keyence XM-5000 coordinate measuring machine. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Ljdpfxey Iaayo Aifjad Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 8109/30, Drilling and Dowel Inserting Machine with PLC + Part Return | 8 heads For sale: a professional through-feed drilling and dowel inserting machine for the production of furniture components, particularly drawer sides. The machine is equipped with PLC control, automatic part return, and an expanded head arrangement (including rear heads), enabling the complete operation to be performed in a single pass—without re-feeding the workpiece. Technical Specifications: - Number of heads/motors: 8 - Head configuration: front/side/rear (double-sided machining in a single cycle) - Control: PLC - Part return: yes (closed production loop) - Maximum working width: 2000 mm - Power supply: 400 V - Pneumatics: yes - Year of manufacture: 1981 - Manufacturer: Gerhard Koch (Germany) - Condition: operational, in ongoing serial production Performance: Approx. 6,000 drawer sides per 8-hour shift Thanks to the rear heads, components that typically require two passes are processed in one, significantly reducing cycle times and increasing productivity. Laedpeyzg Udsfx Aifsd Applications: - Drawer sides - Cabinet components - Batch and repeat production - Automated production lines Key advantages: - Single pass processing instead of two - High repeatability - Stable, heavy-duty construction - Perfect for mass production - Proven German technology Location: Elbląg Please contact me for further information.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Laodpfezfwycjx Aifjd Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), Koch drying container 1500 liters with additional heating 18 KWr year price: 7.900€ Contact: Mr. Rainer Eckerle Laedpjwmbncofx Aifed

Condition: good (used), Approx. 111 Corlettes, Cordes und Koch, width 1.30 / 2m / 2.40m – used – : Prices per unit ex location (net): Type 1 + 2 (2m wide): only €99 each Type 3 (1.30m wide): only €69 each Type 4 (2.40m wide): only €99 each For complete purchase (preferred): €8,950 (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Collapsible Not stackable Depth: 1.15m Type 1 – approx. 70 units Width: approx. 2m Height: approx. 1.80m Type 2 – approx. 32 units Width: approx. 2m Height: approx. 1.92m Type 3 – approx. 6 units Width: approx. 1.30m Height: approx. 1.80m Type 4 – approx. 3 units Width: approx. 2.40m Lasdpfsyhxlqjx Aifod Height: approx. 1.80m Condition: good, see photos Available: immediately Location: Nuremberg

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine Lasdjwd Rlfopfx Aifed The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: excellent (used), functionality: fully functional, 5 Koch conveyor separators from a cleanroom production. Only PP without glass fibers was processed! The devices are in like-new condition. One device with an additional vacuum discharge valve. 4 machine hoppers. The original price was approximately €14,500. The price is for one unit. Lsdpfx Aexdfxwoifead

Condition: good (used), Year of construction: 2002, machine/vehicle number: 2344, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, total length: 800 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 100 kg, For sale is a hot air container dryer, model CKT 70, from the renowned manufacturer Werner Koch Maschinentechnik. This unit is specifically designed for the efficient drying of plastic granulates, and with a heating capacity of 6 kW, it delivers consistent performance to meet industrial requirements. Transport and loading can be arranged across Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges are welcome! Machinery Trade PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Ledpfx Asy I Rpfoifoad Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For more information or to get in touch, please visit our website.

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a professional vacuum conveyor unit from KOCH Technik (Type A130). This device is designed for the automatic conveying of plastic granulate or regrind directly to an injection moulding machine or extruder. The unit is distinguished by its extremely robust cast aluminium construction, built for demanding industrial use. Thanks to the quick-release system (clamping ring), the unit can be opened tool-free for cleaning or maintenance purposes. Technical data: Voltage: 24 V DC Type: A130 Year of manufacture: 06/2017 Material connection: Quick coupling (Camlock) Mounting: 4-hole flange plate Container volume: 12 to 15 litres Lodpfsy Iwkijx Aifjad Conveying distance: 10–15 metres, depending on the vacuum pump used Transport and loading can be organised across Europe on request, for an additional charge. Prices quoted are exclusive of VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Part-exchange or trade-in welcome! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Stainless steel tank 5000 L with mixer, cooling. In good condition They have a built-in pipe around the tank that can cool Laodovr E N Nspfx Aifsd

Condition: new, functionality: fully functional, machine/vehicle number: Typ-U6M_Angebot, empty load weight: 210 kg, maximum load weight: 540 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,500 mm, loading space height: 150 mm, suspension: other, Year of construction: 2026, Koch trailer, 150x250cm, 750kg, "Type U6M" Our best-selling, unbraked Koch trailer, Type U6M, with a body made entirely of anodized aluminum. Car trailer, Type U6M, with loading dimensions of 150 x 250 x 25cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 540kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features: 10-year warranty (unique) Double-walled, anodized aluminum side panel, 30mm (unique) Side panel with a load securing system in V2A stainless steel (unique) 1 x 22/200 aluminum ramp, mounted on the side Side panel fastening with 8 mm V2A stainless steel screws (unique) Support wheel, standard 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional features: Ledpfei R Hxksx Aifead 15mm thick, stable screen-printed wooden floor, slip-resistant birch plywood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185/70 R13 tires, balanced and suitable for 100 km/h Steel sheet fenders, fastened with 8 mm stainless steel screws 12-volt electrical system, 13-pole plug with reversing light 2 rear supports, as shown, are available as accessories for €102.00 Other Vehicle registration document / registration certificate, Part 2 If you would like to purchase this trailer or have any further questions, please use our internal box trailer "Type U6M_Offer".

Condition: like new (used), functionality: fully functional, Of the total 24 material containers, 8 units are currently still available. Laedswpp Ebopfx Aifod All containers are offered without material conveying devices. Only 4 units feature an extraction box beneath the container. External dimensions are 120 x 120 x 200 cm (length x width x height). Capacity is approx. 1,250 litres. The containers are in very good condition and originate from a cleanroom production environment where only PP material was processed.