Used Löser So-790 for sale (4,089)

Condition: used, Year of construction: 1990, working area D= 30 mm speed 20 m/min Bar length 3000- 6000 mm weight of the machine ca. 3 t dimensions of the machine ca. 9 x 2 x 2,4 m Belt grinding line with 2 grinding units for pipes and bars. Surface of round material is grinded by through feeding. Credpfxszl E Rcs Akqof

Condition: used, Year of construction: 1989, band width 150 mm band length 3500 mm band speed 30 m/sec Scheiben-Ø 400 mm grinding feed 0 - 5 m/min work piece revolutions 0 - 140 U/min power capacity - workpiece power 2,2 kW grinding diameter 100 - 600 mm clamping length 6000 mm bed length ca. 8000 mm voltage 380 V / 50 Hz motor speeds: 1450 U/min power capacity 15 kW weight of the machine ca. 9,5 t Crsdpfx Aoyw Tkkskqef dimensions of the machine ca. 8,6 x 2,6 x 2,5 m

Year of construction: 1999, condition: ready for operation (used), Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible. Csdpfxjyypl No Akqsrf

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Edge coils supporting unit (reels N°) 6 Crsdpfefi Tkgsx Akqef Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Glue scraping unit 08.50 Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: used, Loeser S0 profile sander for sanding profiles using templates. Credjzryxbjpfx Akqof The sanding belt is guided over the profile wheel/template, thereby transferring the shape onto the wood, which is fed manually through the machine. Technical data: - Max. workpiece dimensions (L x W x H): approx. 500 x 300 x 100 mm - Motors: approx. 2 kW each

Condition: good (used), 380V. A video is available. Credpfxozr R Tvj Akqof

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Cedpfx Akowvt I Hsqjrf Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Weight: 140 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, power: 4.4 kW (5.98 HP), Löser KS100 BA contact belt grinding machine, centerless for pipes and rods, used, with pneumatic belt tensioning, year of manufacture 1999, in very good condition Credpoqk Uyaefx Akqsf

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Crsdpfx Aotmqi Dekqef The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Crjdpopugwisfx Akqsf The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: ready for operation (used), Contact Belt Grinder LÖSER KS 360 for grinding pipes / round material - Abrasive belt length: 2500 mm - Abrasive belt width: 5 - 75 mm - Material grinding length: endless - Grinding range / diameter: 3 - 70 mm - Belt speed: 7.5 - 34 m/s - Contact wheel diameter: 100 - 225 mm Cjdsywy Ddepfx Akqsrf - Motor power: 1.6 / 2.6 kW Dimensions (LxWxH): 1.2 x 0.6 x 1.8 meters / Weight: 350 kg Subject to errors and omissions.

Condition: used, usedmake Löserbelt unit 1motor 1 / 1,4 kWspeed 2 speedssuction connection own suction 0,44 kWspace requirement approx. 1400 mm x 800 mm x 1700 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Crjdpfx Aevwfwkekqef

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour Crodpfeqpdkcsx Akqsf

Condition: like new (used), Year of construction: 2021, operating hours: 2,444 h, load capacity: 6,000 kg, fuel type: electric, Manufacturer + model: BAKA / GENKINGER EFU 60 - So ID: 26093.5385 Category: Used Forks: 1700 x 580 x 95 mm Capacity: 6000 kg Year: 2021 Hours: 2444 hours Cjdozrnz Ropfx Akqjrf Battery: 24V / 460Ah Options: BAKA / GENKINGER, operator seat, pallet truck, power steering.

Condition: new, Year of construction: 2020, operating hours: 45 h, load capacity: 1,300 kg, lifting height: 4,500 mm, fuel type: electric, mast type: triplex, construction height: 2,140 mm, Manufacturer + model: HUBTEX / GENKINGER EGP 13/44 So Mast: 3F4500 ID: 24053.0388 Category: New Mast: 3F4500 Forks: 1200/2000 mm Lowered height: 2140 mm Lifting height: 4500 mm Capacity: 1300 kg Year: 2020 Crodpfx Aozq T T Nekqof Operating hours: 45 hours Battery capacity: 24 V / 345 Ah Options: VERY unique SPECIAL wide-track design!!! - LIFTING CAPACITY 1300 KG @ 1200 mm - Equipped with spreader!! - VETTER click forks 1200 -> 2000 mm!! - Proportional lift & lower valves - With cantilevered forks - SUITABLE for all types of pallets - Width between support legs: 1340 MM!! Power steering, condition LIKE NEW!!

Condition: used, Year of construction: 2021, load capacity: 9,000 kg, lifting height: 6,840 mm, total length: 6,473 mm, - Max. Tragfähigkeit bei 600 mm LSP 9 000 kg - Max. Hubhöhe 6.84 m - Max. Reichweite 3.72 m - Heben 9.2 s - Senken 7.8 s - Teleskop Ausfahren 6.6 s - Teleskop Einfahren 6.1 s - Betriebsbremse Ölbad Lamellenbremse an Vorder- und Hinterachse - Parkbremse Automatische Negativbremse - Hubraum 4.5 l - Leistung 141 PS / 104 kW - Max. Drehmoment 534 Nm / 1500 U/min - Einspritzung direkt Credpfjztgl Rex Akqef - Zugleistung (unter Last) 10.905 daN - Steigfähigkeit (beladen) 48% - Getriebe hydrostatisch - Fahrtrichtungswahl elektro-hydraulisch - Anzahl Gänge vorwärts / rückwärts 2/2 - Max. Fahrgeschwindigkeit 30 km/h - Achsen DANA - Lenkarten Allradlenkung mit 3 Lenkarten - Hydraulikbedienung JSM® Multifunktions Joystick - Lastmomentanzeige und Überlastabschaltung nach EN 15000 Norm - Hydraulik variable Axialkolbenpumpe - Load Sensing Pumpe 180 l/min - 270 bar - Hydrauliköl 151 l - Kraftstoff 150 l - Wenderadius (Aussenkante Räder) 4.88 m - Kippwinke Geräteaufnahme (An- / Auskippen) 137 ° - Innenschallpegel (LpA) 79.7 dB - Außenschallpegel (LwA) 103 dB - Vibrationswert an Händen / Armen

Condition: used, Year of construction: 2022, load capacity: 9,000 kg, lifting height: 7,000 mm, total length: 7,360 mm, - Max. Tragfähigkeit bei 600 mm LSP 9 000 kg - Max. Hubhöhe 6.84 m - Max. Reichweite 3.72 m - Heben 9.2 s - Senken 7.8 s - Teleskop Ausfahren 6.6 s - Teleskop Einfahren 6.1 s - Betriebsbremse Ölbad Lamellenbremse an Vorder- und Hinterachse - Parkbremse Automatische Negativbremse - Hubraum 4.5 l - Leistung 141 PS / 104 kW - Max. Drehmoment 534 Nm / 1500 U/min - Einspritzung direkt - Zugleistung (unter Last) 10.905 daN Codpfx Akeztgdmjqsrf - Steigfähigkeit (beladen) 48% - Getriebe hydrostatisch - Fahrtrichtungswahl elektro-hydraulisch - Anzahl Gänge vorwärts / rückwärts 2/2 - Max. Fahrgeschwindigkeit 30 km/h - Achsen DANA - Lenkarten Allradlenkung mit 3 Lenkarten - Hydraulikbedienung JSM® Multifunktions Joystick - Lastmomentanzeige und Überlastabschaltung nach EN 15000 Norm - Hydraulik variable Axialkolbenpumpe - Load Sensing Pumpe 180 l/min - 270 bar - Hydrauliköl 151 l - Kraftstoff 150 l - Wenderadius (Aussenkante Räder) 4.88 m - Kippwinke Geräteaufnahme (An- / Auskippen) 137 ° - Innenschallpegel (LpA) 79.7 dB - Außenschallpegel (LwA) 103 dB - Vibrationswert an Händen / Armen

Condition: used, Year of construction: 2022, load capacity: 9,000 kg, lifting height: 6,840 mm, total length: 7,300 mm, · Feuerlöscher · Schüttwinkel 109 ° · Kippwinkel 15 ° · Wenderadius (über Räder) 4.72 m · Anzahl der Vorderräder / Hinterräder: 2 / 2 · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang Credpfx Ajztf U Dokqsf · Motornorm: Stage V / Stufe 4 · Anzahl der Zylinder / Tragfähigkeit der Zylinder: 4 - 4567 cm³ · Nennleistung Verbrennungsmotor / Leistung (kW): 143 Hp / 105 kW · Max. Drehmoment / Motordrehzahl: 602 Nm@1500 rpm · Kühlsystem des Motors: Wassergekühlt · Batterie 12 V · Zugkraft 10050 daN · Getriebetyp Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. travel speed 35 km/h · Parkbremse Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- undHinterachsen · Steigfähigkeit - beladen / unbeladen: 48.10 % / 37.40 % · Pumpenart: Verstellpumpe · Hydraulikfördermenge - Hydraulikdruck: 185 l/min - 270 bar · Motoröl: 13 l · Hydrauliköl: 151 l · Fassungsvermögen des Kraftstofftanks: 165 l · Abgasnachbehandlung für Diesel (AdBlue®) 20 l · Geräuschpegel im Fahrerstand (LpA) 75 dB · Umgebungsgeräusch (LwA) 107 dB · Schwingungsbelastung Hand/Arm: < 2.50 m/s² · Sicherheit Zulassung der Kabine: ROPS - FOPS Stufe 2 Kabine · Steuerungen: JSM

Condition: used, mileage: 66,428 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,100 mm, first registration: 11/2023, fuel tank capacity: 54 l, CO₂ emissions: 146 g/km, emission class: euro6, color: white, number of seats: 2, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, seat heater, sliding door, traction control, = Additional Options and Accessories = - Sliding door on the right side - Android Auto - Apple CarPlay - Driver attention assist - Automatic headlights - Automatically dimming interior rear-view mirror - Heated exterior mirrors - Passenger airbag - Electric windows (front) - Electrically foldable exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Hill-start assist - Height-adjustable steering wheel - Height-adjustable front seats - Wireless charging for mobile phones - Keyless start - Air conditioning - Tailgate - Collision mitigation by braking - Comfort seats - LED headlights - Leather steering wheel - Front center armrest - Multifunctional steering wheel - Multimedia compatible - Fog lights - Emergency brake assist (BA3) - Emergency call system (EY5) - Parking assist - Rear parking sensors - Front parking sensors - Radio - Radio with DAB - Rain sensor - Rearview camera - Seat heating - Start/stop system - Immobilizer - Bumpers in body color - Thermally insulated glass - Blind-spot monitoring - Connected services - Partition = Additional Information = General Information Number of doors: 5 Model range: Jan. 2022 - June 2024 Cab: standard Technical Information Torque: 270 Nm Number of cylinders: 4 Engine displacement: 1,461 cc Transmission: 7 gears, automatic Acceleration (0–100): 11.7 s Top speed: 175 km/h Dimensions Length/Height: L2H1 Dimensions (L x W x H): 491 x 186 x 184 cm Weights Unladen weight: 1,504 kg Payload: 847 kg GVWR: 2,351 kg Max. towing capacity: 1,500 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 5.6 l/100km Maintenance, History and Condition APK (Periodic Motor Vehicle Inspection): valid until 07.2027 Number of keys: 2 (1 remote control) Crjdpoza U Axefx Akqof Product Safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: ready for operation (used), LAIPPLE / KEB M63L / 4a-SO, serial number: L113063970025005, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Crjdpji D I D Nsfx Akqef

Condition: ready for operation (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Baling press Paal Konti 325 D/SO, year of manufacture 1999 Technical data: Manufacturer: Paal Type: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Drive power: 2 x 45 kW Total connected load: 104 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-wire automatic Throughput at: 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Transport dimensions: approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Csdpfszk Aluex Akqerf The press is in good working order and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. This offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Cjdpfx Aksziw Nlsqerf Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Csdpoytphcofx Akqorf Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: - 0.75 L GDB bottle (height approx. 295 mm) Crate formats: - 12-bottle Pool N2 crate (400 × 266 × 333 mm) - 12-bottle individual crate (395 × 295 × 355 mm) Crate transport: - Cross-flow crate transport - Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: - Length: 2,700 mm - Width: 1,400 mm - Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: - Danfoss frequency converter - Standard electrical configuration Additional equipment: - Cap transport system - Blower unit - Technical documentation available Condition: Used Availability: On request

Condition: used, Year of construction: 2002, Overview This KM 790/5K crate decapper was manufactured by Rink in 2002. The machine can be inspected at any time and is immediately available.  Cjdpfew Nk E Ijx Akqsrf Technical details - Output: approx. 2,800 crates/h (6K), approx. 2,040 crates/h (4K) - Format parts: - 5x centering plates for 0.7l GDB - 5x centering plates for 0.75 Gastro - 3x centering plates for 0.5l GDB/0.5l Euro - Crate conveyor speed: 0.6 m/s - Crate guide: All crates are moved lengthwise through the machine - Noise level: 83 dB(A) - Space requirement (LxW): 4,100 x 1,260 mm - Working area: min. 1,500 mm on the operating side - Hydraulics: Working pressure 150 bar, residual pressure 35 bar - Pneumatics: Air consumption approx. 5.2 m³/h at 5 bar; operating pressure min. 5 bar, max. 10 bar; connection size ½" - Electrical: Operating voltage 230/400 V; control voltage 24 V; power 12.0 kVA; frequency 50 Hz; fuse protection 3 x 25 A min.; supply line min. 2.5 - Control: PLC control Siemens S7-300, HMI Simatic OP7

Condition: used, Year of construction: 2016, Overview The crate decapping machine was complete renewed in 2016 by the company Hormes. The machine was previously used in a German company. Tech Specs: - Capacity: app. 2.800 crates/h - Formats: - 0,7 l GDB in 12er crates - 0,5 l GDB in 12er crates - Crate dimension: - 356 x 275 x 257 mm (0,5 l GDB) - 356 x 275 x 346 mm (0,7 l GDB) - Electrical control - Siemens S7 control Csdpfx Ajwigy Nekqsrf - Caps - For the decapping of aluminium and plastic caps, 28 mm