Used Lung Kmes-Tl 25-15/6,5-350 for sale (34,406)

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Motor 15 kW - 400 V - 3000 rpm - Dust extraction port diameter 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Bdodpfozdlwgsx Apvod Availability: short-term Location: 63934 Röllbach

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit, double hydraulic pump, radial piston pump -Double hydraulic pump: radial piston pump with clutch -Pump: unfortunately no exact type designation -Part No.: A3918 2 515 105 780 Bedpfx Apspy Rybevedd -Clutch: Kupplungstechnik Rheine PL 350/15/ -Dimensions: see photo technical. drawing -Dimensions: 730/470/H470 mm -Weight: 164 kg

Condition: ready for operation (used), Brinkmann TC 25 / 810+100 submersible pump, serial number: 0313002815-19535001, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bjdpfx Apei D Hmhjvsdd

Condition: used, Riva Calzoni Hydromotor MR350/350/46852 250bar – removed from Ferromatik MV 200-970 - taken from a running machine - fully functional Manufacturer: Riva Calzoni Type: MR350/350/46852 Spare part no.: 10098158 Bdodpfx Aow Ah Riepved

Condition: used, mileage: 34,100 km, power: 92 kW (125.09 HP), first registration: 10/1957, fuel type: diesel, empty load weight: 5,670 kg, maximum load weight: 1,820 kg, overall weight: 7,490 kg, tire size: 8.25-20 EHD, axle configuration: 4x4, energy efficiency: F, CO₂ emissions: 601 g/km, color: red, driver cabin: other, gearing type: mechanical, number of seats: 6, total length: 2,350 mm, total width: 2,800 mm, front tire size: 8.25-20 EHD, rear tire size: 8.25-20 EHD, Equipment: all wheel drive, Vehicle location: Bovenden, Klöckner H-Deutz TLF 16/53, TLF 16/25 A3500/6 Bodpfxjvhlhdo Apvedd Year of construction:1957 The sale to tradesmen or export is subject to 19% VAT. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 16,757 km, power: 168 kW (228.42 HP), first registration: 02/1990, overall weight: 13,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Equipment: ABS, all wheel drive, Iveco 120-23 AW V8 diesel as a 16/25 TLF with 0l water tank +++ Originally only 16,754 km V8 naturally aspirated diesel with 12.7L displacement 4x4 all-wheel drive with low-range gear 6-speed manual transmission 2x differential locks (center and rear) 9 seats 10Rx22.5 tires Magirus body 16/8 Magirus rear pump Extremely well maintained and ready for immediate use +++ Errors, changes, and prior sale reserved Bjdpfx Apox A N Tpovsdd

Condition: new, Year of construction: 2026, functionality: fully functional, Shafts for Shredders: Arjes, Terex, Eggersmann, Olnova, Pronar, Komplet, Doppstadt Arjes Impaktor 250/350, Arjes Compactor 300, Terex TDS 815, Terex Caiman 150, Terex Greentec LS2, Komplet Krokodile, Olnova model 5, Doppstadt Core Shredd 250, Eggersmann Impaktor 250 Bdsdsychwzopfx Apved - Standard shafts - Special shafts - Customer-designed shafts - Spare parts - Knives Concrete / Paddle / Star / Metal / Electro and many more!

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Bdjdpfx Apsidchcoved Type: MSNSBG 350/2.0 S 350 GD Included in the scope of supply: 1x CS Sigma profile, used Material color: sendzimir galvanized Overall length: approx. 5,500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: good (used), Technical data for the CS Sigma profile: Bsdeidchgspfx Apvodd Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in the scope of supply: 1x CS Sigma profile, used Material color: sendzimir galvanized Overall length: approx. 5,600 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in the scope of delivery: 01x CS Sigma profile, used Material color: sendzimir zinc-coated Overall length: approx. 4,450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm Bedpfjidcg Ajx Apvsdd

Condition: good (used), Year of construction: 2016, 2x compressor units 10 bar, Boge, screw compressor, incl. compressed air dryer, compressed air tank with sound insulation hood – used –: Price per unit ex location (net): €4,950 (net) Manufacturer: Boge Model: C 15 LDR-350 Bdodpjwxw E Ujfx Apvsd Year of manufacture: 2016 Volume flow: 1.70 m3/min Final compression pressure: 10 bar Motor speed: 3000 rpm Motor power: 11 kW Operating hours as of 16.04.2024: 25,929 / 27,938 (currently approx. 30,000 h and 31,000 h respectively) Compressed air dryer Type: DS18-2 / 575145405 Serial number e.g.: 400392250004 Min/Max refrigerant pressure: 1.3 MPag / 2.2 MPag Min/Max air pressure: 0.1 MPag / 1.6 MPag 230V Compressed air receiver: Manufacturer: BWB 306 169 Capacity: 350 L Max. operating pressure: 11 bar Max. temp.: 100°C Min. temp.: -10°C Test pressure: 16.5 bar

Condition: new, Year of construction: 2026, functionality: fully functional, Headstock lathe KRAFT FB-15/20/25/30, brand new · 1500-3000mm faceplate · CNC or conventional. BRAND NEW HEADSTOCK LATHE KRAFT FB SERIES – FOR LARGE FACEPLATE WORKPIECES, FLYING UP TO 2 T The KRAFT FB series economically processes large, flat workpieces such as brake discs, flanges, wheels, bearing rings, or drum components. Four sizes with turning diameters from 1,500 to 3,000 mm and workpiece weights up to 2 t (flying) cover single-piece production to medium-sized series. Available as a conventional or CNC version (Siemens, Fanuc, or Fagor), optionally with or without a tailstock, bed longitudinally or transversely. KEY FEATURES Robust construction - Machine bed made of MEHANITE cast iron in one piece, bed width 450 mm, heavily ribbed - Hardened bed guideways, stress-relieved annealing - Guarantees long-term, highly precise operation without warping High-precision main spindle – accuracy class G1 - Inductively hardened, spindle bore up to 230 mm (option) - Spindle head in a compact design, large surface cross-ribs Powerful drive - Spindle motor 22 kW (29 kW optional), up to 600 rpm, high torque - Stepless spindle speed as standard CNC-capable from the factory - X/Z servomotors from Fanuc or Siemens - Ball screws X: Ø25 P5 C3, Z: Ø40 P10 C5 - Rapid traverse X/Z: 6/8 m/min Flying workpiece machining – the headstock lathe advantage - Workpieces clamped directly on the spindle head, without a tailstock - Optimal for flat, disc-shaped components with a large diameter OPTIONS CNC Siemens/Fanuc/Fagor · constant cutting speed · PARAT tool holder · C-axis + driven tools/milling unit · tailstock · spindle bore Ø 230 mm · spindle motor 29 kW Bdedpfx Apec Txdhjvjd MACHINE DATA – FOUR SIZES KRAFT FB-15 - Turning diameter/faceplate: 1,500 mm - Spindle speed: 4–600 rpm - Z-axis travel: 1,000 mm - X/Z servomotors: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,000 kg, dimensions: 2200 × 2200 × 2500 mm KRAFT FB-20 - Turning diameter/faceplate: 2,000 mm - Spindle speed: 4–600 rpm - Z-axis travel: 1,000 mm - X/Z servomotors: β12/3000i 1.8 kW / β22/3000i 3 kW - Weight: approx. 7,500 kg, dimensions: 2200 × 2600 × 2750 mm KRAFT FB-25 - Turning diameter/faceplate: 2,500 mm - Spindle speed: 4–400 rpm - Z-axis travel: 1,500 mm - X/Z servomotors: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 8,000 kg, dimensions: 2500 × 3000 × 3100 mm KRAFT FB-30 - Turning diameter/faceplate: 3,000 mm - Spindle speed: 4–400 rpm - Z-axis travel: 1,500 mm - X/Z servomotors: 1FL6067 2.0 kW / 1FL6092 3.5 kW - Weight: approx. 10,000 kg, dimensions: 3000 × 3200 × 3350 mm COMMON DATA FOR ALL SIZES Turning length 330 mm · max. workpiece length 450 mm · bed width 450 mm · flying workpiece weight max. 3,000 kg · cross slide width 250 mm · X-axis travel 330 mm · spindle bore 155 mm (230 opt.) · spindle nose A2-11 (A2-15 opt.) · spindle taper 7 MK · 4 spindle speed stages · spindle motor 22 kW (29 opt.) · rapid traverse X/Z 6/8 m/min · 4-position tool holder, tool shank 32 × 32 mm CUSTOMIZABLE TO YOUR REQUIREMENTS Send us your specific application – workpiece spectrum, accuracy, desired control – we will configure the FB series according to your needs. Attractive leasing and hire-purchase conditions available through our partners. On request, delivery including installation, commissioning and training of your operating personnel.

Condition: good (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,600 mm, Manufacturer: SORALUCE Type: TL-25 Control: HeidenHain TNC 430 Year of manufacture: 1998 Aiptek ATC 30 positions Automatic head 2.5 x 2.5 Gr Central lubrication Machine housing with front doors Large tool package Specifications Metric US Standard Bsdpev Idalsfx Apvedd X-axis 2500 mm Y-axis 1000 mm Z-axis 1600 mm Table length 2860 mm Table width 1000 mm Table load 7500 Spindle power 25 kW Spindle speed 0 - 3000 rpm Tool holder 50 ISO/Bt/Mk X-axis feed 10000 mm/min. Y-axis feed 10000 mm/min. Z-axis feed 10000 mm/min. Milling head auto index 2.5 x 2.5° Working hours 12500 H Dimensions (estimate) Length 6000 mm Width 3500 mm Height 3500 mm Weight 15000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Year of construction: 1994, condition: used, Max. saw blade diameter: 350 mm Manual material clamp minimum quantity spraying Bdedpjud Uvkofx Apved Digital angle indicator

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Underrun protection, foldable Half-shell mudguards Towing hook at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only for basic tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Bdsdoi Ri Nfjpfx Apvsd Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. 2 clamping screws with lever locks on the side below. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connection plate for air/electricity and brake with large space for best possible operation. Roll cover on one side for stowing on the right, with central locking on the left Country of registration/signs Germany With Dekra approval and certificate (according to §13 EG - FGV) Superstructure strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Support feet, black coated Body RAL, single color Roll cover RAL, single color Available in thermally insulated design!

Year of construction: 2011, condition: ready for operation (used), Refrigerant: R407C, refrigerant charge: 28kg, max. operating pressure high pressure side: 25bar, oil fill quantity: 5.5l, cooling medium: water, volume: 6l, max. operating temperature cooling medium: 35°C, sound pressure level: 74dB(A), ambient temperature: -5° to 45°C, connected load: 12kW, max. electrical fuse protection: 21A, operating voltage: 400V, control voltage: 24V/230V, weight: 340kg. An on site inspection is possible. Bdjdpszcfklefx Apved

Condition: used, Year of construction: 1994, Technical details: grinding diameter: 198 mm grinding length: 200 mm z-axis: längs:240 mm x-axis: quer: 340 mm control: Tschudin CNC E 9034B grinding wheel diameter: 500 mm centre height: 100 mm Distance between centres: 300 mm max. workpiece weight between centres: 100 kg interface: RS 232 total power requirement: 16 kVA weight of the machine ca.: 4,5 t space requirement of the machine approx.: L:3,1xT:3,2xH:2,0 m Plunge type grinding automatic technical specifications: - grinding spindle tool intake: 203,2mm - grinding spindle not swiveling - workpiece spindle swivelling : +30° to -90° - tailstock collet cone = MK 3 - control: ISO - and graphically programing equipment: - electronical balancing device : AB 100 T.K. - grindig wheel changing aid - grinding disc dressing device (also for grinding forms programable) - cooling system with paper filtering system - Measuring device (out of function, integrated measuring control not connected) Bjdpfx Aou Ng A Nopvodd *

Year of construction: 1993, condition: good (used), Circular saw for aluminum Manual feed Manual vertical clamp Saw blade diameter up to 350mm Bdedpfx Apszab Aljved The transport trolley is not included!

Condition: used, mileage: 283,400 km, power: 300 kW (407.89 HP), first registration: 09/2010, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro5, color: blue, brakes: retarder, Equipment: ABS, air conditioning, bathroom, * Our internal reference number: 1081 * Vehicle currently registered and in operation – mileage and condition subject to change * Tourismo O 350 - 15 RHD (12 m version) * First registration: 09/2010 * 300 kW / 408 hp – EURO 5 (high-performance engine) * The following work was carried out at EVOBUS at the end of August 2025: * NEW CLUTCH * NEW DUAL MASS FLYWHEEL * NEW TRANSMISSION WIRING HARNESS * Cruise control * Retarder * 51+1+1 – total 53 seats * Armrests between double seats * WHEELCHAIR LIFT * Wheelchair space * Toilet * French inspection book available * Maintenance book also available * Alloy rims * New air conditioning service in 06/2025 * New customer service in 06/2025, including e.g.: oil change, diesel filter, air dryer cartridge, oil filter, ... * The customer is obliged to independently inspect the condition and specifications of the goods/vehicle! * etc. * All information without guarantee * Subject to prior sale * Please refer to our General Terms and Conditions Bsdpfjy T Dtnex Apvodd

Condition: good (used), Hohner Economy 25/40 – 15/25 – 25 stitching machines in good condition, immediately available. Bedpjh Um Nlsfx Apvodd

Condition: excellent (used), functionality: fully functional, Lathe Takisawa TS-25 The Takisawa TS-25 Technical specifications for the Takisawa TS-25 Turning diameter: 280 mm Bdsdpfjy Artnsx Apvsd Turning length: 600 mm Spindle speeds: 40 – 4,000 infinitely variable Spindle bore: 62 mm Drive power: 18.5 kW Control: Fanuc 15 T

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 15 mm -Length: approx. 25 m -for electric cable winch -other crane ropes are also available Bdjdpjb A S Iyjfx Apved -Weight: 24 kg

Condition: used, clamping head, deadbolt collet, collet sleeves, collet, tool holder, tool holder, milling holder, milling tool, clamping sleeves Bodpsu S Tbzofx Apvjdd -Clamping sleeves: length 80 mm, 5 pieces -Sizes: Ø 15/16/20/25/30 mm -Price/Delivery: complete -Transport dimensions: 140/90/H80 mm -Weight: 1.8 kg

Condition: good (used), Clamping cylinder, hydraulic clamping cylinder, hydraulic clamp, pneumatic clamp, air cylinder, clamping cylinder for power chuck, hydraulic cylinder -Manufacturer: WMW, clamping cylinder stroke 15 mm -Type: 25 30-7312 -Shaft Ø 14 mm -Number: 12x clamping cylinders available -Price: per piece -Dimensions: Ø 50 x 96 mm -Weight: 1.2 kg/piece Bodpfx Aewziikjpvjdd

Condition: used, Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, accessories -Clamping tool: various designs, 16 pieces -Groove width: 15 - 25 mm Bdjdpfx Ajt Sbbqspvjd -Dimensions: see photo technical drawing -Price/Delivery: complete -Transport dimensions: 250/240/H90 mm -Total weight: 14.7 kg