Used Mütek Mpp 180 for sale (6,373)

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. Ibodpfxod Nm Sio Am Dec + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: as good as new (ex-display), Year of construction: 2025, Special price Isdpsd Su Hxjfx Am Djbc *available upon request New: With the frequency converter option, up to 45% state funding is possible. Combination of: mütek briquetting press MPP 60 + extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected to each other 1. Technical data of briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery in 2 components possible Weight: approx. 1200 kg Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Hydraulic pre-compressor Option cooling press clamp: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data of clean air extraction unit MMJET 350: Extraction port diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: reconditioned (used), Year of construction: 2023, Special price for a machine with low usage Base machine: €29,990 net Options available at an extra charge: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines are characterized by a robust design that guarantees consistent briquette quality in continuous operation. The pressing process takes place without the addition of binders, solely through hydraulic pressure. The volume of the raw material can be reduced by up to 90%, depending on the material. Throughput: up to a maximum of 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 volts / 50 Hz / 3-phase, Pump: 40 liters, . Maximum briquette length: 50 mm, Optional briquette length: 40 mm, Silo diameter: 1,000 mm, Isdpfjd N Dnhsx Am Djbc Oil tank: 110 liters. . Dimensions: 1750x1130x1100 mm (l x w x h) Weight: 950 kg. . Hydraulic pre-compression via slide valve Main press cylinder Vertical cylinder . Level sensor: yes . Requirements for the raw material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on the agitator: 150 kg - The feed must be free of magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Condition: like new (used), Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Isdsgl Nlmepfx Am Dsbc Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Ibedpfx Ajgfm Rysm Dec Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Ibedpfx Amjzb Dr So Dsc Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. Ibjdpez Rk Hxefx Am Dsc The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ab0307002198, Autobag AB 180 OneStep – fully automatic bag packaging machine with thermal transfer printer Year of manufacture: 2007 | Location: 41564 Kaarst-Holzbüttgen Delivery and collection possible by arrangement. For sale is a used Autobag AB 180 OneStep (Automated Packaging Systems) – a proven, robust, and flexible bag packaging machine with an integrated thermal transfer printer. Equipment: • STANDARD SEAL FLATTENER • STATIC BACK SHELF (NO SUPPORT) • AB180 ONESTEP 203 dpi PRINT KIT (Thermal transfer printer PI-412c) • FUNNEL SIZE A12 • BD100 (Orange Loop / Bag De-aerator) Ijdpfx Aez Spqxsm Djbc Also included in the scope of delivery: 1 box with 13 film rolls (Autobag chain bags) Mode of operation (manufacturer's description): The AB 180 OneStep feeds an Autobag chain bag unwound from a roll through the printer, opens it by means of compressed air, and prepares it for filling. The products are placed manually or via feeding systems into the bag. Subsequently, the bag is sealed using a foot switch or automatically. The integrated thermal transfer printer eliminates the need for offline labeling – printing and packaging are carried out in one step (“Print-n-Pack” / Next-Bag-Out technology). Ideal for fulfillment, mail order, spare parts, small and medium-sized series with frequent product changes. Technical data (according to the product data sheet): • Weight: 142 kg • Dimensions: approx. L 1,700 × W 850 × H 1,150 mm • Electrical: 110/220 V, 50/60 Hz switchable • Compressed air: 150 l/min at 5.5 bar (dry, clean air) • Passage: up to 108 mm • Bag thickness: 35–100 µm • Bag sizes: width 50–270 mm | length 140–630 mm • Performance: up to approx. 30 bags/minute (with printing) We will gladly send you the product data sheet and other documents upon request. If you are interested, I look forward to hearing from you – I will be happy to prepare an individual offer for you, including shipping costs.

Year of construction: 2006, condition: used, functionality: fully functional, Pinacho Smart 180 lathe in excellent working condition Ibsdoygq R Sepfx Am Doc

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Iedpfx Ajz Spiqem Debc Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. CEE power plug. Chain. Storz-type discharge coupling.

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Ibedpfxoffh Atj Am Dsc Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: excellent (used), CATALOGUE NUMBER 72133 TECHNICAL DATA - max cutting height 180mm - track width 400mm - roller width 370mm - roller diameter 60mm - max blade diameter 300mm - blade bore diameter 80mm - min workpiece length 630mm - max workpiece width 600mm from above: - pneumatic pressure roller - pawls - metal pressure roller, 2 pcs - pawls - blade roller - smooth pressure roller - pawls - smooth pressure roller from below: - metal toothed pull roller, 2 pcs - pawls - track - blade roller - track - stepless feed rate adjustment via frequency inverter - main motors 2x55kW - feed motor 4kW - hydraulic body lifting up/down - hydraulic blade roller adjustment - pump motor 0.37kW - central lubrication - dust extraction port diameter 1x300mm, 1x380mm - dimensions L/W/H 3200x2350x2000mm - weight approximately 5500kg Ibedjzrmn Aepfx Am Doc ADVANTAGES - Made in Italy - Two-roller - Multi-blade saw, used, very good condition Net price: 238900 PLN Net price: 55560 EUR Net price calculated at an exchange rate of 4.3 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, KUKA KR 180 Series 2000 robot with a 3-meter process axis. Max. weight: 180 kg Max. reach: 2700 mm Max. payload: 180 kg Dimensions: 2700 mm Number of axes: 7 Year of manufacture: 2001 Scope of supply: Robot, controller, cables, teach pendant, wiring diagram. Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two weeks start-up warranty. No further warranty. Iodpfx Ajz Rl Udjm Debc Spare parts are continuously available in stock. The robot is fully functional and can be inspected. Free loading / ex-works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width 340mm - roller width 360mm - disc bore diameter 70mm - max disc diameter 315mm - max cutting height 180mm * from above - feed roller, toothed, pneumatically pressed - 2 rows of ejectors - 3 sliding, smooth pressure rollers - ejectors - roller with saws - 3 sliding, smooth pressure rollers - ejectors * from below - feed roller, toothed - track - roller with saws Isdpfx Aozxqtvsm Djbc - track - stepless feed rate adjustment via frequency inverter - main motor 2x55kW - feed motor 4kW - electric lifting of the upper body up/down - electric adjustment of the rollers with saws - central lubrication - diameter of the dust extraction nozzle 2x150mm - dimensions L/W/H 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Made in Italy – Two-roller – Ideal for large components – Multi-blade saw, used, very good condition Net price: 145900 PLN Net price: 33930 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Ibodex Af Rdjpfx Am Dsc Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: Ibsdpfx Aezxwypom Djc 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono (see technical details on photos) Iedpfx Amez Nydwj Djbc

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Flanges DN40 Voltage: 230 V mono Ibjdjz Nyd Depfx Am Dec (see technical details on photos) Year of construction: 2021 - Rarely used

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Iodpfxjchqxxe Am Dsbc Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm feeder belt base dimensions: 5100x1300x2520mm total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers Ijdjzrm T Sjpfx Am Djbc – reverse gear – DTR documentation – used shredder, very good condition Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Year of construction: 2008, condition: used, Asparagus peeling machine with eight stations The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table. Iodpfx Aez Nc Tyom Debc The rating plate shows it was built in 2008 by Hepro GmbH in Delbrück (Germany), supply 400 V, 50 Hz, 3 phase, 0.5 kW. The machine stands on castors. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Asparagus peeler (Schäl-Automat) Stations: 8, each switchable Power supply: 400 V, 50 Hz, 3 phase, 0.5 kW Construction: Stainless steel, on castors

Condition: excellent (used), Year of construction: 2016, operating hours: 38,950 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, Clamping force 1600 kN Mould opening force, max. 240 kN Size of mould platens (h x v) 930 x 860 mm Ijdpfx Aoz N E Egjm Dobc Distance between tie bars (h x v) 630 x 520 mm Mould opening stroke 450 mm Mould height min/max 300 / 550 mm Max. daylight 1000 mm Hydraulic ejector - stroke 150 mm Ejector force 22 kN Injection unit: Screw diameter 25 mm Ls/D ratio 26 Injection pressure 2500 bar Stroke volume 59 ccm Shot weight (PS) 53,7 gr. Injection rate 147 ccm/s Screw speed 477 1/min Plasticising rate max. 12 g/s Nozzle pressure 30 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 28 kW Installed heating capacity 8,1 kW Adjustable barrel heating zones 5 Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,00 x 2,20 m Total machine weight 13200 kg Max. mould weight 1900 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LRX 100 X: 550 mm Y: 1200 mm Z: 2000 mm C: 0 - 90 ° Additional Options: - 2 x Air valve - 5 x core pulls, Software only - 12 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2007, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. Maximum temperature: 1,320°C Power: 30 kW Heating power: 1 control zone, zone 1 = 30 kW Iodpez H I N Iofx Am Djbc Thermocouple: Type S with a diameter of 0.35 mm in the ceramic support tube Temperature control: JUMO dTron 304 controller Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials. Ibjdjh S H T Ujpfx Am Doc Throughput is highly dependent on the screen and the input material: - up to 60 kg/h for EPS with a 15 mm screen *the coarser the screen, the higher the throughput. Motor 9.2 / 11 kW - 400 Volts, sturdy steel construction, hardened cutting blades, screen with interchangeable inserts, optional hole sizes: (8), (10), 15, 22, 26, 30, 40, or 60 mm with electric drive, star-delta starter, overload protection, and 8 m power cable, ready for connection, discharge nozzle 150 mm, optional for plastic or corrugated pipes, blowing distance approx. 12 m, chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, dimensions approx. 1200 x 900 x 1270/1400 mm (l x w x h) weight approx. 240 kg, Spare parts prices and options: 24 hardened blades, €9.90 each (net) 6 bolts, €14.90 each (net) 1 screen, €475 (net) 1 cover, €290 (net)

Condition: used, CTS Climate testing chamber / Shaker chamber CTS TV-70/530 Climate testing chamber Climate testing chamber for combined temperature and vibration testing A used climate testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH is for sale. The system was developed for combined climate and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and endurance tests. Shaker/vibration exciter is not included in the offer! Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Equipment type: Climate testing chamber / Shaker chamber Test chamber volume: approx. 530 liters Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) Ibjdpfezd Uq Aex Am Doc External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x CTS TV-70/530 Climate testing chamber Scope of supply as shown in the pictures Shaker/vibration exciter is not included in the offer. Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.