Used Mütek Systemtechnik Hawk-Eye for sale (3,124)

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Nledpochuvrsfx Agyjc Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Njdpfxedubpus Agyjlc Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Nlodetqfhxjpfx Agyec Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: new, Year of construction: 2026, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Nlodpfx Aogl Nlmegyjc Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. Nedpfev Rpxljx Agyolc If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months Nlsdpfx Agsgfm Rysyoc for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Njdpfx Ajffh Ategyelc Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: good (used), Clean air extraction system Nlsdpfx Aorb D Njgysc Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% Nlsdpfsdwktksx Agyoc - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Nljdegmfa Aepfx Agysc Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Year of construction: 2015, condition: like new (used), Item: M-09300-Combi-Packer STAINLESS STEEL COMBI PACKER Multipack Njdpfx Ageh Hq U Ueyjlc Producer:Sema Systemtechnik Machine Model: 1400s-FN-TPW Year of production: 09/2015 Complete Stainless Steel That is not used long time, like new one!

Condition: new, functionality: fully functional, overall weight: 100 kg, total height: 1,660 mm, Year of construction: 2025, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Nedowkpwaspfx Agyelc Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system Nljdpfsyxccrjx Agyoc - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Nodpfx Aou Smcbogyslc Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 150 mm, scan area width: 150 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be created with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers once they have been set. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer it to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. The LAS 28 XLe laser model can optionally be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as lateral cantilevers for marking long parts, movable Z-axis, drawer systems, etc., can also be implemented. Programmable, software-controlled axes (X-, Y-, Z-axis) and database connection are also possible. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus system - system for automatically determining the focus distance - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm Nedpfx Aewkpvvsgyelc - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 120 Kg

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Nledpfoxt Dmxox Agysc Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. --- Nedpfxob Nulhs Agyolc In principle, the machines work for dry source materials: - Straw - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Feed opening 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Blades: multiple reversible Hydraulically operated slide Screen size optional (10 - 40 mm) Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF, and other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional options for the shredder: - Articulated conveyor belt + €8,770 net Horizontal section: 1200 mm Nlsdpfxov Sqrpj Agyec Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear.

Condition: new, Year of construction: 2026, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics Nledjd Hkqhjpfx Agyjc - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, input voltage: 230 V, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, scan area length: 110 mm, scan area width: 110 mm, type of cooling: air, type of input current: AC, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials Nodpewkpxkjfx Agyolc

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Nlodewlc Stepfx Agyjc Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, laser power: 30 W, type of cooling: air, total width: 1,550 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg Nlsdpfowkpx Rex Agysc

Condition: new, Year of construction: 2026, functionality: fully functional, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Njdpfx Ajuy H Nqegyjlc The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 690 mm, total length: 600 mm, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, space requirement height: 900 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 30 Watt (Optional: 20 Watt, 50 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) Nedpfx Ajy I Nbmjgyjlc - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) Nedsy Urpyopfx Agyjlc - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg