Used Mas Rm Mt 820I Cnc for sale (17,606)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Nodpfszizkysx Am Tewi Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: as good as new (ex-display), Year of construction: 2021, The machining center PROJECT TF 600 S was developed for efficient cabinet (carcass) production. Technical Specifications: Axes: X-Axis: - Max. workpiece length: 2,800 mm - Min. workpiece length: 200 mm - Travel speed: 130 m/min Y-Axis: - Max. workpiece width: 1,200 mm - Min. workpiece width: 50 mm - Travel speed: 75 m/min Z-Axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 8 mm - Travel speed: 30 m/min Units for 6-sided machining: 1. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 2. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW Nodow Ugpyspfx Am Tjwi 3. Top grooving saw in X-direction: - Speed: 3,400 rpm - Max. saw blade diameter: 120 mm - Groove position: between 55 and 800 mm 4. Top routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 5. Bottom routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 6. Bottom drilling head: - Vertical spindles in X-direction: 3 x 3 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm Control via Windows PC Software: MASTERWORK MACHINE VERSION Mobile control console with color screen, keyboard, and mouse Wireless barcode reader Additional features: - Intelligent, patented worktable: The worktable moves automatically up and down, as well as left and right for optimal support of all drilling and milling operations. Through-feed drilling and milling is also possible. - Controlled workpiece clamping device - Energy-efficient air flotation tables using an integrated fan (instead of external compressed air) - Rack and pinion drive on X and Y axes with linear guides - Ball screw drive on Z-axis with linear guides - CE safety features: light barriers and fencing, as well as 2 pressure stages for the clamping jaws - Automatic central lubrication system Further data: Dimensions: 5,280 x 2,480 x 2,190 mm (LxWxH) Extraction connections: 2 x 200 mm, 1 x 100 mm Required air pressure: 8 bar

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, Nedsxgu R Ijpfx Am Towi steering ring

Condition: good (used), Year of construction: 1999, Swing diameter: 630 mm over the bed and 290 mm over the cross slide Spindle speed range: 8 - 3,000 rpm Drive power: 28 kW Nedpfszl Tlnsx Am Towi Machine weight: 5,000 kg

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 16i-MB, overall weight: 1,700 kg, spindle speed (min.): 500 rpm, spindle speed (max.): 30,000 rpm, spindle motor power: 10,000 W, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, input current: 25 A, CNC Machining center WILLEMIN W 408MT Nwjdpfx Aozcx Dfjm Tsi TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control: FANUC 16i-MB Number of axes: 5 Stroke X axis: 250 [mm] Stroke Y axis: 200 [mm] Stroke Z axis: 300 [mm] Feed rate on X, Y and Z axes: 30000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 6000 [rpm] Main spindle max. power: 3.7 [kW] Angular C axis stroke: 360 [°] B axis swivelling stroke: 115 [°] Spindle type: HSK-E40 Min. spindle speed: 500 [rpm] Max. spindle speed: 30000 [rpm] Spindle power: 10 [kW] Tool changer magazin number of stations: 48 Max. tool lenght: 95 [mm] Max. tool diameter: 63 [mm] Lubrication tank capacity: 80 [l] Collant pump flow rate: 40 [l/min] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 1700 [Kg] More information upon request.

Condition: excellent (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, empty load weight: 8,000 kg, machine base height: 3,940 mm, spindle motor power: 4,000 W, milling length: 5,920 mm, Döküm Gövde (LCD) Dokunmatik ekran ve CNC-Kontrol unitesi Otomatik CNC- Rektefiyeleme sistemi İnterpilasyon işlemi ile otomatik silindir rektefiyeleme özelliği (Opsiyonel) X-Y-Z Eksenler AC/Servo motor kontrol Elektornik el çarkı X-Y-Z eksenleri için (Hız ayarlı) Hassas elektronik cetvel (X,Y,Z eksenler) Silindir rektefiye ve Yüzey tarama işlemleri similasyon özelligi (Opsiyonel) Hareketli rektefiye başlığı değiştirme robotu (Opsiyonel) Fener mili aşağı ve yukarı hareketi hız ayarlı Elektonik hız ayarlı fener mili (Elk.El çarkı ile fener mili kontölü) Yüzey tarama sırasında tabla hız ayarı değiştirme sistemi Hareketli LED aydınlatma sistemi. Hazır katerli elmas sistemi Dik sütun kızak koruma perdesi Dik sütun(Z-Eksen) V kızak sistemi Tabla kızakları(X-Y eksen) Linear Kızak ve otomatik yağlama sistemi. Elektrik paneli iç aydınlatma Rektefiye başlığı bilyali sistem Fener mili aşağı ve yukarı hareketi bilyali vidali mil ve otomatik yağlama Tabla ileri-geri ve sag-sol hareketleri bilyallı vidali mil ve otomatik yağlama(X-Y Eksenler) Zaman ayarlanabilir otomatik yağlama sistemi Elektonik el çarkı Hız ayarlı ve 3 eksen kontrollü (X,Y,Z) İnternet Erişimi ve uzaktan erişim İndustry 4.0 uyumluluk Dik sütun servis merdiveni Nwodpfx Aexpwfaem Tji

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Nwsdpfxswtpfps Am Tsi Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Nedpfx Aey Ibgzsm Towi Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Final sale price with moderate asking: €950,000 Collection only

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door Nedpfx Aey Stahom Tewi and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, overall weight: 5,000 kg, We are offering this refurbished metal spinning machine UD320 CNC-Fanuc, fully overhauled in 2025. Nwsdpfx Aeykmmksm Tji This is a metal spinning machine that has been completely refurbished by us and equipped with a new, modern Fanuc CNC control system. We currently own a total of 9 of these machines. Five of these machines have already undergone a retrofit with the Fanuc control unit. The overhaul of other components such as bearings, guides, and slideways is carried out either in-house or through external contractors. We are very familiar with these machines. The hydraulic unit has been custom-built to our specifications. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2023, operating hours: 1,176 h, 2023 | Rubble Master RM 100GO! | Used Crusher | 1176 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 363000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 88 inspection points 83 approved ✅ 4 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Nsdpfx Amozk Igqs Tjwi The Crusher was operating but fell in a error mode , driving and hydraulics work but chrusher part doesnt engaged, problems with clutch sensor chrusher , owner is going to fix this , drivetrain needs to be tensioned and chruser and moving parts needs lubrication, Crusher wear OK no visable welds or cracks on Crusher , not operationally tested 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40910 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Njdpfx Asyrhcpsm Tjwi Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Automatic central lubrication, Sensor for panel measurement ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head 1 HW grooving saw blade 2 x DP grooving shank cutters 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Condition: excellent (used), Swing over bed 320 mm Distance between centers 800 mm Spindle speeds -4000 rpm Nwedpfx Aoi Ezhqjm Tei Control: HEIDENHAIN Manual Plus M Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Nsdpfx Aszhlfrom Towi Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: good (used), Tool trolley with inserts Njdpfxjzhi Tmo Am Tswi with turning holder for NC lathe, Shaft: 50 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: HYFRA TYPE, CNC laser cutting machine Lasercomb, model MTL1510, 400V, year of manufacture 2000, machine dimensions 276 x 196 x 215 cm high (control panel), cooling unit Hyfra type VWK904-S, year of manufacture 2000, 84 x 82 x 143 cm high, currently dismantled. Nedpfxsy D Ilps Am Tswi

Condition: new, functionality: fully functional, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 2,500 kg, maximum load weight: 1,000 kg, overall weight: 3,500 kg, tire size: 225/65 R16, tire condition: 100 %, wheelbase: 4,215 mm, next inspection (TÜV): 06/2028, fuel: diesel, fuel tank capacity: 80 l, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 20 m³, loading space length: 4,100 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, airbag, blind spot assist, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, immobilizer system, non-smoking vehicle, onboard computer, parking sensors, power assisted steering, power mirror, soot filter, spoiler, start-stop system, summer tires, tire pressure monitoring, traction control, truck registration, EU – Vehicle with warranty. Low-frame box body, platform design. Load compartment length – 4200 mm Load compartment width – 2200 mm Load compartment height – 2200 mm Payload approx. 1000 kg Rear double doors, 270° opening Tie-down rails on the sides Roof spoiler Air conditioning Cruise control 80-liter fuel tank On-board computer System Multimedia OpenR link 10 Radio with USB, Bluetooth ESP (Electronic Stability Program) Reinforced suspension Electric front windows Central locking with remote control Turn signals in exterior mirrors Spare wheel Available in approximately 6-8 weeks. Nwsdpfjh Aid Tsx Am Tji Delivery, leasing, or financing options available. Contact us: Auto-Wardenga Irenäus Wardenga, also available via WhatsApp.

Condition: used, mileage: 149,811 km, power: 125 kW (169.95 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 12 m³, loading space length: 3,381 mm, loading space width: 1,865 mm, loading space height: 1,898 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Renault MASTER 2.3 cDi refrigerated box body, 3.40 m, with portal doors * Body: TBV Willstätt, right-hand side door * sliding refrigeration curtain * THERMOKING V-300 MAX on-road and stationary cooling, 380 V electric * Payload approx. 930 kg * Vehicle no. for customer inquiries: 4561 * Air conditioning * Emission sticker (green) * Electronic Stability Program (ESP) * Manual transmission * Particulate filter * Electric windows * On-board computer * Anti-lock braking system (ABS) * Three-seater * Power steering * Bluetooth Nedpfx Ameyczqho Towi * Steel wheels * Full service history * 2/3-door No liability for typographical or printing errors Sale to business customers only Subject to prior sale and modifications. All descriptions are for identification purposes only and do not constitute any guarantee as defined by sales law. The description in the contract of sale is authoritative. * TOP SERVICE & QUALITY * We are pleased to provide you with a LEASING, FINANCING, or HIRE PURCHASE offer * Warranty insurance available upon request from the insurer * TÜV / UVV LBW / tachograph testing and installation of OBU device can be organized by our local partners * 30-day export license plates available * All export documentation possible, but each must be requested individually * Toll registration for Toll-Collect can be arranged on site * Free transfer from Stuttgart Airport or Metzingen train station (Württemberg) * ARRIVAL TRAIN STATION: 72555 METZINGEN / WÜRTT. * FOR ENGLISH: Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * Visit us on our website at * Over 200 vehicles in stock at all times

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 10 h, Selling my 6-watt laser module for CNC Step, only tested once. Njdpfx Amsyrql Hs Tjwi

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,460 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, total height: 2,850 mm, total length: 2,500 mm, total width: 2,400 mm, workpiece weight (max.): 6,000 kg, table width: 800 mm, overall weight: 6,000 kg, type of input current: three-phase, table length: 1,800 mm, drilling depth: 500 mm, Technical equipment Nwodpfx Amovppxpe Tji -Automatic swivel head +-45 degrees -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling Nedovppw Sepfx Am Tswi -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Njdpfx Amoyazc So Tswi Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Workpiece Diameter: 620mm Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Pneumatic Connection: not required Colour: Blue RAL 5001, Grey RAL 7035 For further details, please see the PDF description in the attachment.

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2000/6000 Construction: steel + aluminum Working area: 6200/2200/1400 XY axis drive, double-sided gantry drive: 4Nm stepper motors with gearboxes, rack and pinion gears, accuracy class 8 Z axis drive: stepper motor, ball screw Double aluminum beam with a special cross-section ensures stiffness and durability Travel speed: up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI Automatic material detection system Power supply: 240V Allowable load: 3000 kg Total weight: 2500 kg USB port for opening projects and transferring files using external pen drives Sheet metal detection system THC height control system TBI linear guides Double-sided gantry drive: X axis: stepper motor and rack and pinion gears, accuracy class 8 Y axis: stepper motor and rack and pinion gears, accuracy class 8 Z axis: stepper motor and ball screw Drives implemented using TBI 20 brand rails Table equipped with a water table - low operating costs (Water table, providing cleaner cutting, material cooling, and reduced gas emissions during processing) WHY IT'S WORTH IT WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) PROFESSIONAL GUIDES FROM THE RENOWNED HIWIN COMPANY - THESE GUIDES ARE CHARACTERIZED BY VERY LONG LIFE, HIGH CUTTING QUALITY, AND DO NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, FASTENERS, HOLDERS, ETC. ARE MANUFACTURED BY US USING CNC TECHNOLOGY, WHICH ENSURES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH-QUALITY SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT AFFECTED BY DUST OR JAMS ADVANCED THC MY PLASM FOR SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN THE CUTTERS WE INSTALL CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET THE CUSTOMER'S REQUIREMENTS WE HELP WITH LEASING ARRANGEMENTS Possibility to select a suitable cutter to meet the individual needs of the company. We offer other table sizes. Nwodpfx Amjiphrts Tei

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 Construction: steel + aluminum Working area: 4000/2000/200 XY axis drive: double-sided gantry drive: 4Nm stepper motors with gearboxes, rack and pinion Z axis drive: stepper motor, ball screw Travel speed: up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files via external pen-drive Sheet detection system THC height control system Nodpfx Ajiphrlem Tswi TBI linear guides Double-sided gantry drive: X axis: stepper motor and rack and pinion Y axis: stepper motor and rack and pinion Z axis: stepper motor and ball screw Drives implemented using TBI HGR 20 rails Table equipped with a water table (water table, providing cleaner cutting, material cooling, and reduced gas emissions during processing) INCLUDED: - water table - replaceable grating - control program in Polish - CE declaration of conformity - technical documentation - warranty - commissioning and training included in the price The latest control system available in our cutters: Integrated THC height regulator Anti-torch dive function Accepted file types: DXF, PLT (hpgl), G-Codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Cutting parameter database Project angle correction to material Ability to cut from any location Ability to cut from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to the material layout angle Soft and Hardware limits THC anti-dive functions Game Pad control possible Material detection via touch system, floating head WHY IT'S WORTH IT WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) PROFESSIONAL GUIDES FROM THE RENOWNED HIWIN COMPANY; THESE GUIDES ARE CHARACTERIZED BY VERY LONG LIFESPAN, HIGH CUTTING QUALITY, AND DO NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, FASTENERS, HOLDERS, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH ENSURES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH-QUALITY SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUSCEPTIBLE TO DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET CUSTOMER REQUIREMENTS WE HELP IN ARRANGING LEASING Possibility to select the appropriate cutter to meet the individual needs of the company. We offer other table sizes.

Year of construction: 2023, condition: new, PLASMA CUTTER MODEL MTX 2040 - VENTILATED Construction: Steel + Aluminum Working area: 4000/2000/200 XY axis drive: Double-sided gantry drive: 4Nm stepper motors with gearboxes, toothed racks Z axis drive: Stepper motor, ball screw Travel speed: Up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000 kg Total weight: 800 kg net USB port for opening projects and transferring files using external pen drives Sheet metal detection system THC cutting height control system TBI linear guides Double-sided gantry drive: X axis: Stepper motor and toothed racks Y axis: Stepper motor and toothed racks Z axis: Stepper motor and ball screw Drives implemented using TBI HGR 20 rails Ventilated table adapted for fume extraction INCLUDED: - Ventilated table - Control software in Polish - CE declaration of conformity - Technical documentation - Warranty - Commissioning and training included The latest control system available in our cutters: Integrated THC height regulator Anti-torch plunge function Supported file types: DXF, PLT (hpgl), G-codes (.tap) Integrated CAM module: MyMini CAM Automatic recognition of external objects Path analysis in advance Database of cutting parameters Project angle correction for the material Nsdpfx Aeiphu Ijm Tswi Possibility of cutting from any location Possibility of cutting from the end Import DXF, PLT or G-CODES Automatic generation of paths with offset, entry and exit points The program can be used with external CAM software Separate speed for holes Parameter database Project correction to the material layout angle Software and hardware limits Anti-plunge THC functions Game Pad control possible Material detection via touch system, floating torch head WHY IS IT WORTH IT? WE ARE A POLISH MANUFACTURER OF PLASMA CUTTERS CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) HIGH-QUALITY GUIDES FROM THE RENOWNED HIWIN COMPANY, CHARACTERIZED BY VERY LONG LIFE AND HIGH CUTTING QUALITY, WHICH DOES NOT REQUIRE FURTHER PROCESSING COMPONENTS SUCH AS GEARBOXES, MOUNTINGS, HOLDERS, ETC. ARE MANUFACTURED BY US USING CNC TECHNOLOGY, WHICH GUARANTEES HIGH QUALITY AND REPEATABILITY OUR STRENGTHS: HIGH-CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT AFFECTED BY DUST OR JAMMING ADVANCED THC MY PLASM, SMOOTH TORCH OPERATION CPC INTERFACE (VOLTAGE DIVIDER) MOUNTED IN THE CUTTERS WE MOUNT CUTTERS SUPPLIED BY THE CUSTOMER OR PURCHASE CUTTERS THAT MEET THE CUSTOMER'S REQUIREMENTS WE HELP WITH ARRANGING LEASING Possibility of selecting the appropriate cutter to meet the individual needs of the company. We offer other table dimensions.