Used Mass International Sr for sale (10,944)

Condition: new, Year of construction: 2025, functionality: fully functional, New unit MASS International Rotary distributor SR Touchscreen control Kdedpezkr D Hefx Aqist Motor 400V, 50Hz 360° working range Infinitely adjustable height and tilt Control via freely adjustable times or via potential-free contacts Adjustable discharge height 1100 – 1400 mm Adjustable feed height 600 – 900 mm Hopper width 500 mm, tapering to 200 mm Overall width 500 mm

Condition: new, New machine MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. Kjdpfx Aqeu Ti Tvjisdt There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Kdodpod Tidxefx Aqist Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Lateral collection plates in the infeed section Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, The angle conveyor from MASS is for sale: Type NC - SPEC 500/1800 x 600 Kodsw Nrpbepfx Aqiodt Infeed section: 500 mm Incline section: 1800 mm Usable width: 600 mm, total width: 750 mm Conveyor speed (constant): 6 m/min Mobile base frame with brake rollers Discharge height: max. 1500 mm, min. 1100 mm Side guide: 60 mm PU belt with 30 mm cleat height, temperature resistant from -10°C to +90°C Motor protection switch with 5 m cable & CEE plug

Condition: new, New equipment MASS International Angled conveyor / flow conveyor L - Conveyor belt with a fixed angle of 35° available for short-term delivery MASS International Angled conveyor NC1 Conveyor belt with a fixed angle and collection trays in the infeed section Example as shown: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height adjustable, discharge height 750 - 1050 mm Fixed angle between the infeed and inclined sections Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Optional: Ksdpjhm Axgsfx Aqisdt Other dimensions, see standard delivery list Dimensions according to customer requirements FDA-compliant belt Modified belt speed etc.

Condition: new, New device MASS International Ksdpfer A D S Esx Aqisdt Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, New equipment MASS International NPS accumulation conveyor Conveyor belt / accumulation belt available for short-term delivery Accumulation surface without side walls Height-adjustable, mobile on steerable swivel casters Example: NPS 1 Length 1500 mm Kjdpfx Ajizi S Doqiedt Usable width 250 mm External width 250 mm (without motor) Accumulation surface without side walls, therefore full usable width Height-adjustable discharge height 200 - 400 mm PU belt, smooth, black Belt speed 3 m/min Conveyor belt mobile on steerable swivel casters The quoted price refers to the NPS1. Optional: Dimensions according to any customer request Belt approved for food (FDA compliant) Modified belt speed Frequency inverter for stepless adjustment of the belt speed etc.

Condition: new, New unit MASS International Conveyor belt NI 1 Flow conveyor/accumulation conveyor Angle-adjustable conveyor belt with hopper in the infeed section available for short-term delivery Example: NI 1 Length 1500 mm Kdsdpfjh Nyp Ujx Aqist Usable width 250 mm Overall width 305 mm (without motor) Height-adjustable discharge height 600 - 1000 mm Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on steerable stop rollers Optional: other dimensions, see standard delivery list dimensions according to customer requirements FDA-compliant belt modified belt speed etc.

Condition: new, functionality: fully functional, New equipment MASS International Z series conveyor belt NDZ Angled conveyor / flow conveyor available for short-term delivery Example as shown in the picture: height-adjustable angled conveyor with adjustable angles NDZ 1 Infeed section 600 mm Kodpeiz S Htjfx Aqisdt Ascending section 1300 mm Discharge section 500 mm Working width 250 mm Overall width 305 mm (without motor) height-adjustable discharge height 700 - 1000 mm adjustable angles for infeed and discharge sections adjustable inclination PU belt Color: black L-shaped cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button movable on steerable stop rollers three-part hopper plates for the infeed section The quoted price applies to the NDZ1.

Condition: new, Year of construction: 2025, functionality: fully functional, The granular mixer is available in 6 versions: The version can be made of stainless steel or coated steel: Technical specifications: MV 2 Kdodpsd R Atrofx Aqiot The MV 2 is designed for the complete mixing of the entire plastic granulate, due to the forced guidance provided by the screw sleeve. Container capacity: 120 kg / 200 L L x W x H: 700 mm x 700 mm x Height: 1050 mm / 1250 mm - Screw, removable - Control for mixing times - Extraction device - 1 drain - Mobile base frame, running rollers 100 mm, all with parking brake.

Condition: new, Year of construction: 2022, *WAREHOUSE CLEARANCE* *DISCOUNT OFFER* The conveyor belt is from 2022, new and unused. We offer a 1-year warranty. Kdedpfjhy Edvex Aqist New price from model year 2023: €1,870 L: 2000 mm W: 150 mm Mobile Belt speed: 3 m/min, but can also be adjusted Height adjustable: 840 mm - 1240 mm Additional information: Available with or without guide rails/side walls (height: 60 mm)

Condition: new, Year of construction: 2026, MIXER Mod. MV2 • Steel construction, painted exterior (RAL 9006) • Capacity: 120 kg / 200 liters • Square frame: 700 x 700 mm • Adjustable height: from 1085 mm to 1385 mm (from the floor to the loading point) • Programmable control unit with emergency stop button (The customer can choose between manual mode - continuous operation - and automatic mode - with adjustable operating time and pause) • Geared motor: 0.5 HP / 0.37 kW, 220/380V, 50 Hz • Upper lifting door with hinges for loading material with safety microswitch • Lower lifting door for discharging material with safety microswitch Kodpfx Aqswktm Eoisdt • Side openings for connecting a suction hose • Mixer frame on adjustable telescopic legs with swivel wheels with brake

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm • Loading length: 600 mm • Separating length: 800 mm Kdjdpjwktn Ajfx Aqist • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Condition: new, New machine MASS International Model NS1 Angle conveyor / L-shaped conveyor / Conveyor belt Available at short notice Adjustable angle conveyor NS1 with catch plates in the feed section Example as shown: Kedpsuip Ilofx Aqijdt Feed section: 600 mm Rising section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and rising sections Variable inclination adjustment Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable locking castors Three-piece hopper plates for feed section The quoted price refers to the NS1. Other angle conveyors in different sizes available to order—see list, image 2. Custom dimensions available upon request.

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 6m, Used Machine Manufacturer: Mass International Kjdpfx Ajvvlkhoqiodt Model: NP / 042/2 Overall Dimensions: 6000 x 480 x 1000 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The conveyor is equipped with 3 fans, making the system ventilated/coolable. Electrical Specifications: 400 V

Condition: ready for operation (used), Conveyor Belt, Transport Belt, Running Belt 6m, Used Machine Manufacturer: Mass International Model: NP / 04270 Overall Dimensions: 6000 x 420 x 930 mm Kdodpjv Dgndefx Aqiet Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The belt has 3 fans, and the track can be ventilated/cooled. Electrical Specifications: 400V

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, 2015, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Kdodpozz Sidofx Aqijt Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: new, Year of construction: 2022, For sale is a CTM CT 200 container from MASS. Kdedpfxoip Ucne Aqiet These are available in various sizes (see pictures).

Condition: new, Year of construction: 2026, functionality: fully functional, The NPS belt conveyor is for sale. It can be ordered in various lengths and usable widths. Kdsdpolkda Hofx Aqijt - High-quality aluminum profile, anodized, with grooves - Without guide plates - Smooth PU conveyor belt, temperature-resistant from -10°C to +90°C - Mobile substructure, adjustable from 900 - 1300 mm - Worm gear motor, 3 x 400 V, 50 Hz - Constant belt speed of approximately 6.0 m/min - Motor protection switch with 5 m cable & CEE plug

Condition: new, Year of construction: 2026, functionality: fully functional, Z-type belt conveyor, type NDZ, available in various lengths and widths - High-quality aluminum profile, anodized, with grooves - Rubber-coated drive roller - Aluminum side guide, 50 mm high - PU conveyor belt with cleats, 30 mm high - Mobile substructure with adjustable angle - Motor protection switch with 5 m cable & CEE plug Available upon request: - Custom size - Timed control - Frequency inverter (€485) - Wavy edge (€492) Kedpsg Arxvsfx Aqijdt

Condition: used, functionality: fully functional, power: 650 kW (883.75 HP), total length: 48,000 mm, total width: 8,720 mm, total height: 6,464 mm, Year of construction: 2019, HIGH-CAPACITY 3-LAYER CO-EXTRUSION FLAT SHEET LINE (2100 mm) Manufacturer: FONG KEE INTERNATIONAL MACHINERY CO., LTD. (Taiwan) Model: TSE-90/150/150-2400 Year of Manufacture: 2019 Condition: Used – Excellent condition, fully assembled and preserved indoors. Kdedjzzdnfjpfx Aqijt KEY SPECIFICATIONS & PERFORMANCE: • Finished Sheet Width: Up to 2,100 mm (Net trimmed width) • Die Lip Width: 2,300 mm • Output Capacity: Up to 1,000 kg/h (depending on resin and sheet thickness) • Processable Materials: PET, PMMA, ABS, PS (HIPS / GPPS), PC, PP • Polymer Versatility: Configured for engineering thermoplastics and polyolefins (PET, PMMA, ABS, PS, PC, PP sheet extrusion). CO-EXTRUSION & FEED SYSTEM: • Configuration: 3-Layer Co-Extrusion (A/B/A or A/B/C) • Extruders: - Extruder A: Ø 90 mm - Extruder B: Ø 150 mm - Extruder C: Ø 150 mm • Melt Delivery: MAAG Gear Melt Pumps with Dynisco pressure transducers for ultra-stable flow • Extrusion Die: EDI (Nordson) Ultraflex HRC100-FB (2,300 mm, Made in USA) with Fast Gap patent adjustment CALENDER & DOWNSTREAM PROCESSING: • Polishing Stack: 3-Roll horizontal calender with high-precision mirror-finished rolls • Additional Roll Included: Dedicated Matte Calender Roll included with the line • Surface Finish Capabilities: Both High-Gloss / Mirror Optical Grade and Anti-Glare / Matte Finish • Temperature Control: Multi-zone thermoregulation units (TCU) • Protection: In-line dual-side protective masking film application unit • Cutting & Stacking: High-speed automated cross-cutter and automatic sheet stacker unit • Winding: In-line heavy-duty rewinder unit ELECTRICAL, DRIVES & AUTOMATION: • PLC System: Siemens SIMATIC (ET 200SP) with intuitive touchscreen HMI • Frequency Inverters: Siemens Sinamics G120 drive system • Main Electrical Switchgear: Schneider Electric • Cabinets: Independent air-conditioned industrial electrical enclosures FACILITY & FOOTPRINT: • Total Line Length: Approx. 48.0 m • Total Line Width: Approx. 8.7 m • Connected Drive Power: Approx. 650 kW (988 A) • Layout Drawing: Full technical CAD layout available upon request. CURRENT STATUS & INSPECTION: • Condition: Fully assembled, idle, and preserved indoors within a controlled industrial environment. • Availability: The complete line is immediately available for professional on-site visual inspection upon request. • Reason for Sale: Facility line reconfiguration.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Kedpfx Aqozwmz Tjisdt Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Kdjdpjzudu Ssfx Aqiot Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left.

Condition: new, Year of construction: 2026, Angled conveyor belt available in various lengths and widths, as well as different speeds. - Can be moved on steerable stop rollers. - Angle is adjustable. - Cleat height: 30 mm. Kdedelkdbyspfx Aqiot - Spring-assisted height adjustment.

Condition: used, Year of construction: 1998, operating hours: 60,931 h, machine/vehicle number: IntNr231025, A used STAR Micronics SR-32 CNC long-turn lathe with extensive peripherals is for sale. Technical data Year of construction: 1998 Operating hours: approx. 60,931 h Control: FANUC 18i-TB Number of axes: 7 Max. machining diameter: 32 mm Max. workpiece length: 125 mm Headstock travel: 310 mm C-axis: 1° Spindle speed: 350–7,000 rpm Coolant: oil Machining performance Drilling capacity with fixed tool: Ø 13 mm Drilling capacity with rotating tool: Ø 8 mm Tapping: up to M12 Tapping with driven tool: up to M6 Milling capacity: up to Ø 10 mm Equipment / Accessories FMB TURBO 5-42 bar feeder Kdsdozx Rpkopfx Aqijt Bar capacity: Ø 5–42 mm, mounting version “A” MAYFRAN hinged belt conveyor Kraft & Bauer fire extinguishing system CO₂ extinguishing agent container, 10 kg Operating tools Technical note According to the previous operator, the Fanuc cross drive or the corresponding Fanuc drive system is defective. The corresponding function has been deactivated by STAR Micronics. Dimensions and weights Machine approx. 1,700 × 2,512 × 1,700 mm Weight approx. 2,900 kg FMB bar feeder approx. 4,500 × 1,000 × 1,800 mm Weight approx. 1,800 kg The machine can be inspected on site by appointment. Changes and errors in the technical data and information are subject to change!