Used Omga Ti 2500 Super for sale (11,704)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Hnodpfx Anot Uk Rmjdou

Condition: good (used), Year of construction: 1997, I sell the double mitre saw OMGA TI2500 Super. Cutting length 230 - 2500mm Cutting width max. 1500mm Cutting height max. 115mm Saw cutting aggregate main blade + scoring blade each side. Fully tilting - 45 up to + 45 ° Hnjdpfx Aextxh Djndsu 2 Motors x 4,0kW (5,5 HP) Good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Hnodpey D I I Rjfx Andju Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Hjdpoz N H Enjfx Andjnu Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2008, operating hours: 37,000 h, For sale is an ARBURG ALLROUNDER 630 S 2500-800 ECO injection molding machine from 2008 with extensive automation and peripherals. Manufacturer: ARBURG Type: ALLROUNDER 630 S 2500-800 ECO Year of manufacture: 10/2008 Clamping force: 2,500 kN / 250 t Injection unit: 800 Control system: ARBURG SELOGICA The machine is equipped with an original ARBURG Multilift V select with a load capacity of 15 kg. The system also includes a complete safety enclosure, conveyor technology, and other peripheral devices. The machine is connected to the power grid and is currently in operation in a production facility. An inspection can be arranged by appointment. Technical specifications / Design: ARBURG ALLROUNDER 630 S 2500-800 ECO Year of manufacture 10/2008 Clamping force 2,500 kN / 250 t Injection unit size 800 Spindle diameter: 55mm Control system ARBURG SELOGICA Operating voltage 400 V / 3~ / 50 Hz Control voltage 230 V / 50 Hz Total connected load 81 kW Total rated current 145 A Automation: ARBURG Multilift V select Year of manufacture 10/2008 Load capacity 15 kg Control via SELOGICA pneumatic design X-/Y-/Z-axes complete safety enclosure part removal via conveyor belt Hnodpfezw D Hmjx Andeu Additional equipment / Peripherals: Piovan material conveying unit material hopper conveyor belt additional conveyor belt on the machine side several temperature control / tool circuits ARBURG temperature control unit extensive media connections complete automation cell. An inspection of the machine is possible after prior appointment. Location: Greater Thuringia area _____ In addition, the following machines, not listed here, are also available: DEMAG Ergotech 50-270 – Year 2002 DEMAG ViVa 100-400 – Year 2000 DEMAG Extra 200-840 – Year 2007 DEMAG Ergotech 80-200 – Year 1995 DEMAG Ergotech 80-200 – Year 2001 ENGEL Victory 80/40 – Year 2006 DEMAG Ergotech 35/320-120 concept – Year 2002 _____ Subject to prior sale and errors in the technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are appropriate for their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 6.719, functionality: fully functional, cutting height (max.): 90 mm, saw blade diameter: 350 mm, overall weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting depth: 120 mm Max. cutting height: 90 mm Max. saw blade diameter: 350 mm Saw blade bore diameter: 30 mm MACHINE DETAILS Voltage: 400 V Hnedpfx Ajz Ni S Rondou Current consumption: 7.13 Fuse rating: 16 A Main motor power: 3.1 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 900 x 1,700 mm Weight: 500 kg Shipping packages: 1 piece

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 454 31178 T15, Max. master reel width: 1400 mm Max. master reel weight: 1000 kg Max. master reel diameter: 1000 mm Minimum standard slit: 25 mm Rewinding reel maximum diameter: 610mm Maximum production speed: 1000m/min Separated shaftless unwinder Automatic positioning of the web guide camera Razor blades/circular knives/pneumatic knives with automatic slit positioning ASP Automatic tape applicator Linear lay-on rollers 4 differential or pneumatic shafts, mounted on two turrets with automatic reel change Automatic slit reel unloading and positioning Automatic core positioning 6 motors Automatic web tension control through loading cells The machine has chucks for 76 and 152mm The machine has positioning for top knife AND bottom knife; the Automatic Slit Positioning handles the positioning of both the knife and the counter knife APPLICATIONS: Bags, Food packaging, Outer packing, Soft drinks/mineral waters labelling, Aluminum covers for pharmaceuticals Hsdpfx Ajzhwgbondonu MATERIALS: PE, Aluminium, Papers & Laminates

Condition: good (used), functionality: fully functional, Double blade radial saw OMGA RADIALMATIC 900-5 Min./max. working length: 130/2700 mm Cutting height: 125 mm Hnodpsy Sr H Tjfx Andju Cutting depth: 825 mm Blade diameter: 400 mm Motor power: 2×3.68 kW

Condition: good (used), Year of construction: 1995, Automatic notching machine for cross joints (see attached prospect for technical data). Second-hand machine in good condition, tested in our workshop before delivery. Hedoyr A Umjpfx Andenu

Condition: ready for operation (used), Year of construction: 2021, overall weight: 217 kg, load capacity: 6 kg, arm reach: 2,011 mm, number of axes: 6, This 6-axis PANASONIC TAWERS TM-2000WG3 Super Active Wire was manufactured in 2021. It features a maximum reach of 2,011 mm and a payload capacity of 6 kg. The system includes a 350 A welding power source and is equipped with advanced welding processes such as SP-MAG and Pulse MAG. If you are looking to get high-quality welding capabilities, consider the PANASONIC TAWERS TM-2000WG3 Super Active Wire robot arm we have for sale. Contact us for further details. • Welding power source: 350 A • Welding processes: SP-MAG / Pulse MAG (MIG optional; TIG DC optional) • Repeatability: ±0.10 mm or better Hnjdpfx Anez Dtn Dodju • Maximum robot rapid movement: up to 180 m/min • Motion ranges: base ±170°; upper arm -90° to +165°; forearm -80° to +210°; wrist rotation ±270° • Maximum axis speeds: base 195°/s; upper arm 197°/s; forearm 205°/s; wrist up to 629°/s • Wire feeding capability: Super Active Wire • Safety system: CE compliant Additional equipment • Güdel TMF-1 linear track (2,000 mm travel; repeatability ±0.02 mm) with drive, servo control and track structure • 2 × Panasonic servo-controlled rotary positioners + positioner servo control system • 2 × workpiece frames (approx. 3,500 × 1,500 mm) providing 2 welding/loading stations • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • Robot/positioner support structures • 2 × safety light curtains and complete cell guarding • Control and integration system • Robot controller / control cabinet Main Components Included • Panasonic TM-2000WG3 welding robot • Panasonic 350 A welding power source • Robot controller / control cabinet • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • 2 × Panasonic rotary positioners • Positioner servo control system • 2 × workpiece frames • Güdel TMF-1 linear track, 2 m • Linear track drive • Linear track servo control • Güdel track structure • 2 × safety light curtains • Robot / positioner support structures • Complete cell guarding • CE safety system • Control and integration system

Condition: like new (used), Year of construction: 2019, operating hours: 1,150 h, functionality: fully functional, PRODECO E 60 Super Vertical Briquetting Machine Briquet diameter: 60 mm Max. briquet length: 60 mm Motor power: 5.5 kW Capacity: 10/60 kg/h Hsdpfxozl Aq He Andonu Pressing force: 900 kg/cm² Hopper dimensions: 1600 x 1600 mm Supply voltage: 400 V Dimensions: 215 x 180 x 150 cm (H) Weight: 870 kg Year of manufacture: 2019

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher Hjdpfx Anszxn S Aedjnu No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: good (used), Year of construction: 2004, I sell the automatic pneumatic end cutting saw OMGA T521 OPT 6600, year 2004. Input table automatic feeding 6,60m (pusher system) Outut table 3,00m Hnjdpfxez Suzpe Andsu Total length: 10,50m Optimising with automatic cutting sequence modes. Fluorescent chalk sensor reader. Available immediately. CE version. Documentation included.

Condition: excellent (used), Year of construction: 2012, operating hours: 10,168 h, functionality: fully functional, machine/vehicle number: NL254120635, CNC turning machine Manufacturer: DMG MORI Type: NLX 2500 SY 700 with WH10 automation Year of manufacture: 2012 Turning diameter: 460 mm Hnedey Szwhjpfx Andou Turning length: 795 mm Control system: MORI SEIKI M730 BM Diameter over cross slide: 590/360 mm Spindle bore: 80 mm Travel distances X/Z: 260/795 mm Total power consumption: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 3.994 x 3.056 x 2.187 m

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 5 kW (6.80 HP), Automatic electro-mechanic throughfeed case clamp press with eletronic adjustment of the pressing forces, timing and programable closing sequence of the pressing elements. Manufacturer: SCM Group (division CPC) Model: Action TF2500 Production year: 2013 Machine state: plně funkční Hnedpfxozgtg Ij Andeu Main technical parameters: - max. cabinet dimensions: 2500 x 1250 x 650 mm - min. cabinet dimensions: 250 x 250 x 250 mm - feeding belt speed: 20 m/min - working height: 600 mm - length of the infeed conveyor: 2500 mm - length of the outfeed conveyor: 2500 mm - overall power 5kW (15A) Funkcionality: Automatic reading of the cabinet at the infeed including the automatic detection of the central fixed shelf. Programator: - control panel with touchscreen LCD (size 14 cm) - setting of the horizontal thrust (0-1300 kg) - setting of the vertical thrust (0-1300 kg) - selection of the closing sequence (top presser, side presser, top/side presser) - setting of the exact position of the middle side pressers

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Hjdezcfhdspfx Andjnu

Condition: used, Empty weight: 12.500 kg Dimensions (LxBxH): 725 x 287 x 178 cm Serial number: 152040 Year of manufacture: 2000 Control system: Mazatrol L32B X-axis: 2685 mm Y-axis: 1270 mm Z-axis: 100 mm Indexing table: yes Maximum workpiece dimensions: 2500 × 1250 × 25 mm Maximum load: 615 kg Nominal laser power: 4000 W Laser type: CO₂ – YB-L400A 8M Machine weight: 12,500 kg Includes Donaldson exhaust system Length: 7,250 mm Width: 2,875 mm Height: 1,780 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Thursday 5 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 3 November Pickup days are on: - Tuesday 10 November - Thursday 12 November Hodpoz R S Tbjfx Andsnu Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port Hnsdox Nbzuepfx Andju * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE 170 MM HYD 3 JAW CHUCK MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL TOOL SETTER PARTS CATCHER BARFEED Hnsdpfez Rnwbox Andsu

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Hnedpfx Aevwgmmendju Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top.

Condition: used, Year of construction: 2012, Industrial robot Manufacturer: Kuka Type: KR120 R2500 pro with Kräutner DKP1 tilting rotary table Year of manufacture: 2012 Operating hours: under 200 hours Reach: 2,496 mm Weight: 1,049 kg Payload: 120 kg Kuka KRC4 controller with 2 additional axes Hedpfx Aexp N A Rsndsnu Year of manufacture: 2012 Weight: 140 kg Software: KSS 8.2.15 User Tech 3.1.2 Expert Tech 3.1.0 Gripper-Spot Tech 3.0.1 Remote Service 1.0.0 Interface X11 for safety circuit Interface Beckhoff EtherCat for digital I/O Kuka TouchPad KCP4 Kuka connecting cables 61026ä

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Product size max. 2600X2100mm Complete line consists of: 6-spindle Weinig Unimat fourside moulder Hnjdpfx Anog D Uuqedsu Cross chain conveyor Automatic Glue spreading unit with cycle programming Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Condition: excellent (used), Year of construction: 2018, The Agfa Jeti Tauro H2500 LED is a 2.54 m hybrid flatbed/roll-to-roll UV LED inkjet printer. Colour configuration: CMYK Lc Lm + White + primer (6c W4 P2). Under Premium care service contract. Perfect working conditions. Only 3.500 hours of print. The high-performance UV LED printer for demanding large-format production. 2.54 m print width Up to 275 m²/h UV LED technology Hybrid flatbed + roll-to-roll Up to 1,200 dpi CMYK + Light Cyan + Light Magenta Optional White & Primer Hodpjzuzm Sofx Andsnu Print on rigid and flexible media Designed for high-volume, industrial production One machine. Endless possibilities. From signage and displays to POS, retail graphics, décor and banners, the Jeti Tauro H2500 LED delivers high-quality results with exceptional productivity. For further technical specifications please refer to attached brochure.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Hnsdoz R T Exjpfx Andsu Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: used, functionality: fully functional, fuel type: diesel, color: grey, operation weight: 9,900 kg, Year of construction: 2003, operating hours: 3,400 h, Vögele Super 1203 wheeled paver Year of manufacture: 2003 3400 hours 57 kW 9900 - 10200 kg Screed AB315TV 1500 kg Hodoym Aw Rjpfx Andenu Hydraulic pave width up to 315 cm Extensions 2 x 40 cm to 395 cm Leveling