Used Omga Trf 527 for sale (153)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Ljdpfexnlgcex Ac Aern

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Cutting capacity at 90 degrees: 55 mm Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Lredjxwumqjpfx Ac Asn Motor power: 2 x 1.18 kW Saw blade bore: 30 mm Saw blade diameter: 220 mm Spindle speed: 5000 rpm

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Lredpfxsg Tumcs Ac Aon Available immediately.

Condition: used, Year of construction: 1998, total width: 1,400 mm, total length: 3,400 mm, Colour: Green Weight: 250 kg Dimensions (LxBxH): 340 x 140 x 150 cm Ljdpozcnpqjfx Ac Asrn - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: - Number of saw units [pcs.]: 2 - Max. cutting width [mm]: 55 - Max. cutting height [mm]: 110 - Arbor saw blade diameter [mm]: 30 - Min. saw blade diameter [mm]: 215 - Max. saw blade diameter [mm]: 220 - Number of pneumatic clamps: 2 - Options: Digital readout, Tiltable saw unit - Min. tilt adjustable [°]: 0 - Max. tilt adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 4 - Fuse [A]: 16 - Power [kW]: 2.4 - Transport dimensions: 3400mm x 1400mm x 1500mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Ljdpfxjdy Hqvs Ac Asrn Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: used, total width: 1,000 mm, total length: 1,400 mm, total height: 1,700 mm, Colour: Grey Weight: 200 kg - Documentation available: No - CE certificate present: No - Serial number: 165359 - Main motor power [kW]: 2.9 - Max. cutting height [mm]: 110 - Max. cutting width at 90° [mm]: 110 - Max. saw blade diameter [mm]: 350 - Saw arm tilt angle [°]: 165 - Saw blade tilt angle [°]: 90 - Voltage [V]: 380 - Current consumption [A]: 5 - Fuse [A]: 16 - Power [kW]: 2.9 - Transport dimensions: 1400mm x 1000mm x 1700mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information Lsdpfx Aezavq Dsc Aorn VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1989, - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 106 - Max. cutting height [mm]: 80 - Max. saw blade diameter [mm]: 350 - Max. spindle speed [rpm]: 3700 - Voltage [V]: 380 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lsdpfxoxaniws Ac Ajrn Yorick Diebels

Condition: used, Year of construction: 2010, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Colour: Grey Weight: 500 kg Price: On request - Year: 2010 - Documentation available: No - CE certificate present: No - Serial number: 6.719 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 Lrodpfjyna Aasx Ac Ajn - Current consumption [A]: 7.13 - Fuse [A]: 16 - Power [kW]: 3.1 - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2014, total length: 5,200 mm, total width: 900 mm, total height: 1,700 mm, Colour: Grey Weight: 500 kg Price: On request - Year: 2014 - Documentation available: No Lodpfx Aoyna Ayoc Asrn - CE certificate present: No - Serial number: 8.687 - Main motor power [kW]: 3.1 - Max. cutting depth [mm]: 120 - Max. cutting height [mm]: 90 - Min. saw blade diameter [mm]: 350 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 6.53 - Fuse [A]: 16 - Power [kW]: 3.1 - Transport dimensions: 5200mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Dust collector Lodpfx Acozcqxnj Asrn Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Lsdpfxeyy S Uas Ac Aorn Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 300 mm, saw blade bore: 30 mm, Double saw with OMGA feeder Lrjdpfozcv Iuox Ac Ajn

Condition: good (used), functionality: fully functional, OMGA Radial 700 radial saw Cutting width at 90°: max. 700 mm Ledpfx Acezdy E Eo Aorn Cutting height: 125 mm Saw blade diameter: 400 mm Cutting angle adjustment in 3 positions Motor power: 3 kW Machine dimensions: 125 x 130 x 152 cm

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Lsdoxztydopfx Ac Aern Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA Lredpfx Asy Uxn Nsc Ajn - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), OMGA SP500 F Crosscut Saw Cutting width: 500 mm Cutting height: 150 mm Pneumatic saw feed Pneumatic material clamping Lrodpow Dy Shjfx Ac Asn Maximum saw blade size min/max: 490-500 mm Saw blade bore diameter: 30 mm Right table length: 200 cm Left table length: 200 cm Saw motor power: 5.5 kW CE certificate

Condition: excellent (used), functionality: fully functional, OMGA Radial Arm Saw RN 450 Cutting width at 90° max: 450 mm Maximum cutting height: 80 mm Saw unit adjustable in two planes Lredpfxeyzp Dne Ac Asn Saw blade speed: 3000 rpm Main motor power: 2.21 kW Blade diameter: 300 mm Power supply: 220V

Condition: good (used), functionality: fully functional, OMGA Radial 700 Radial Arm Saw Max cutting width at 90°: 700 mm Max cutting height: 110 mm Saw unit adjustable for angle in two planes Lrsdpfx Aeyym Afec Aen Saw blade speed: 3000 rpm Main motor power: 2.61 kW Pneumatic feed of the saw unit

Condition: good (used), functionality: fully functional, Double blade radial saw OMGA RADIALMATIC 900-5 Min./max. working length: 130/2700 mm Cutting height: 125 mm Lrodjy Sr H Tjpfx Ac Ajn Cutting depth: 825 mm Blade diameter: 400 mm Motor power: 2×3.68 kW

Condition: ready for operation (used), Year of construction: 2000, type of input current: three-phase, cutting height (max.): 80 mm, saw blade diameter: 300 mm, height adjustment type: mechanical, total length: 132 mm, total width: 104 mm, total height: 160 mm, overall weight: 130 kg, cutting length (max.): 700 mm, mount diameter: 30 mm, OMGA RN700 Radial Saw Specifications: - condition - used - manufacturer - OMGA - model - RN700 - disc diameter max 300 mm - disc diameter min 295 mm - spindle 30 mm - saw motor - 2,94 kW - maximum dimensions of the cut piece 80 x 700 mm - guards on the saw for the safety of the saw operator - retracting cable for the body of the saw - adjustment of cutting in three planes - suction nozzle fi 80 mm - 2000 year of production - the machine meets CE standards - weight - 130 kg - overall dimensions - 132 x 104 x 160 cm ( W x L x H ) Lrsdpfouf R Huex Ac Asn Additional information: - the machine is in excellent technical condition, ready for immediate use - the pictures show the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and transportation costs

Condition: used, Year of construction: 1995, functionality: fully functional, OMGA T720 bandsaw Specifications: • Technical condition – used, after professional inspection • Manufacturer – OMGA • Model – T720 • Working width – 250 mm • Working height – 80 mm • Motor power – 2.2 kW • Right table – roller table, 200 cm long • Left table – conveyor belt, 260 cm long • Table width – 29 cm • Pneumatic stops for cutting to a specified length – 2 pcs, controlled from the machine’s control panel • Adjustable cutting speed • Max. blade diameter – 350 mm • Spindle – 30 mm • Dust extraction port – 100 mm • Body weight – 210 kg • Overall dimensions – 510 x 110 x 155 cm (L x W x H) • Body dimensions – 90 x 110 x 155 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use Lredsza E Uxopfx Ac Aen • The photos show the actual condition of the item for sale • Possibility to power on and test the machine on site • Free training on machine operation (at the company’s premises) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or a leasing loan

Condition: ready for operation (used), Year of construction: 2011, Omga Double Mitre Saw TR2A NC with semi-automatic operating cycle and pneumatic control Motor power: 2.2 kW per unit Total power: 5.02 kW Workpiece dimensions for straight cuts Height: 80 mm or 90 mm Depth: 145 mm or 132 mm Workpiece dimensions at 45° Ljdsy Sinzjpfx Ac Aorn Height: 80 mm or 90 mm Depth: 102 mm or 93 mm Min. length straight: 225 mm Min. length 45°: 385 mm Max. length: 2800 mm Saw blade diameter: 300 mm Motor speed: 3000 rpm Space requirement: 3830 x 1100 x 1600 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Lsdpot Uk Rmefx Ac Aern

Condition: good (used), Year of construction: 1996, Offer 25115 Technical Data: - Saw blade diameter: 400 mm - Saw blade speed: 3000 rpm - Cutting height up to approx.: 125 mm - Cutting depth up to approx.: 600 mm - Bevel adjustable on 2 axes - Table size approx.: W 800 x D 800 mm Lsdjwn D Emepfx Ac Asrn - Table height: 920 mm - Drive: 400 V / 1.5 kW - Space requirement approx.: W 800 x H 1900 x D 1100 mm - Weight approx.: 200 kg

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Ljdpfx Asxvh E Roc Ajrn Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test