Used Bima for sale (108)

Condition: ready for operation (used), Year of construction: 2004, IMA Bima 210 Year of manufacture: 2004 Milling area: 3000 x 1200 C-axis Liquid-cooled milling motor Drilling unit Vacuum pump 6 supports Schmalz vacuum cups HSK 63-F Saw unit Machine in good condition Angled unit Available at the end of December 2026 Fodpfx Ajz E U A Sol Sogh

Condition: used, Year of construction: 2009, functionality: fully functional, number of slots in tool magazine: 18, total height: 3,500 mm, total length: 5,000 mm, total width: 3,000 mm, overall weight: 4,000 kg, table length: 4,200 mm, table width: 1,250 mm, 1. Work table with dimensions of 4,300 x 1,250 mm 2. 8 supports (24 suction cups) 3. 8 loading rails 4. Main spindle 7.5 kW (max. 11 kW), 1,500 - 18,000 rpm 5. Tool magazine for 18 tools 6. IMA 14 drilling unit 7. 2 x Vacuum pump, 90 m3/h Fsdpsz Ny Hxofx Al Ssgh 8. Protective mats – alternating operation mode 9. IMAWOP software on the machine

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Profiling unit Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Fgjdpfx Asz Ekczjl Ssh Belt sanding unit Motor power: 0.75 kW Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: 24406, functionality: fully functional, operating hours: 900 h, input voltage: 400 V, input frequency: 50 Hz, ⚙️ IMA BIMA CUT 145/330 – Technical Specifications (Main) 🔹 Working range (axis travel) • X axis: approx. 3300 mm • Y axis: approx. 1450 mm • Number of axes: 3 (typically X, Y, Z) 🔹 Spindle • Spindle power: approx. 18 kW • Applications: milling, drilling, and board nesting 🔹 Tool changer • Automatic tool changer (ATC): up to 18 positions 🔹 Material clamping system • Vacuum table with beams and suction cups 🔹 Saw unit • Saw projection: approx. 145 mm • Cutting length: approx. 330 mm ⸻ 🛠️ Typical features and equipment • 5-sided drilling (top + X+/X−/Y+/Y− sides) • Saw unit for cutting and grooving • Optional horizontal milling aggregate (HBO) • Automatic loading and unloading table (depending on configuration) • Nesting system (panel optimization with simultaneous machining) • Automatic lubrication Fjdpfeykn Dwjx Al Ssgh • Waste and chips conveyor (belt) ⸻ 📌 General information • Manufacturer: IMA Schelling (Germany) • Year of manufacture commonly found in offers: approx. 2010–2016 (often 2014) • Applications: furniture production, MDF panels, HPL, solid wood, nesting

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards Fgsdpozuw Rtsfx Al Sjh - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: good (used), Year of construction: 2002, functionality: fully functional, 3-axis machine Working area: X-axis: 3,000 mm Y-axis: 1,200 mm Height above the top edge of the suction plate: 100 mm 6 work piece supports, each with 2 tubeless vacuum suction cups, each with 1 rear and 1 front work piece stop 1 work piece stop in the Y direction (left and right) 4 lifting rails for placing heavy work pieces, automatically lowerable 1 vacuum pump, 100 cbm/h Machining units: Main spindle, 5 kW Speed: 1,500 - 24,000 RPM water-cooled Rotation direction: left & right Fsdez D A Rbjpfx Al Sogh Automatic tool magazine with 8 positions moves directly along with the milling spindle for milling tools only Vertical drilling unit with 14 spindles Spindle spacing: 32 mm All spindles can be controlled individually Speed: 6,000 - 9,000 RPM Horizontal drilling/sawing unit 4 spindles Feed stroke: 80 mm Drilling diameter: max. 12 mm Grooving saw diameter: max. 125 mm Unit can be swiveled 0 / 90 degrees Control / Software IMAWOP 5.0

Condition: used, Machining area: - in the X direction without gluing 6000 mm - in the X direction with gluing 5000 mm - in the Y direction 1200 mm - in the Y direction with main spindle + center distance 20 mm 1300 mm max. workpiece height above - top edge of suction plate Z1 100 mm - max. workpiece thickness Z2, dependent on equipment/application Work table height: approx. 950 mm 1 main spindle with pneumatic feed stroke - drive power: 12 kW in S-1 operation - tool holder: HSK F63, taper diameter = 38 mm - tool change: automatic - change force: 11000 N - tool weight: max. 6 kg - direction of rotation: clockwise/counterclockwise, programmable - speed range: continuously variable 1500 - 24000 rpm, programmable - drive: frequency-controlled three-phase motor - spindle lubrication: single grease lubrication - spindle cooling: water cooling 1 CNC axis rotating 360 degrees 1 vertical drilling unit S21 Machine table consists of: - 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program - 6 sets of suction plates consisting of a total of - 6 suction plates 114 x 159 x 100 mm - 6 suction plates 125 x 75 x 100 mm - The support arms and suction plates can be individually positioned according to the corresponding workpiece size. Changeover area: - without pendulum machining, without gluing: X = 2 x 2900 mm - free space in the middle: X = 200 mm - without pendulum machining, with gluing: X = 2 x 2150 mm - free space in the middle: X = 700 mm - with pendulum machining, without gluing: X = 2 x 2400 mm - free space in the middle: X = 1200 mm - with pendulum machining, with gluing: X = 2 x 1700 mm - free space in the middle: X = 1600 mm Feed drive system Rapid traverse rates: - X-axis 100 m/min - Z-axis 25 m/min Air pressure: 6 bar Tool changer magazine with 18 positions Tool coding: position-coded Fsdezupibepfx Al Segh Tool weight: max. 6 kg Tool length: max. 150 mm Tool diameter: max. 100 mm when fully loaded max. 150 mm with free adjacent positions or nesting Central connection for extraction Mains voltage: 3/N/PE, 400/230 V, 50 Hz 1 vacuum pump 100 m3/h

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (software IMAWOP) Max useful working area (without edge banding process) mm 6100 x 2000 x 125 Max useful working area (edge banding process) mm 3100 x 1925 x 100 (panel thickness) No. 10 movable rails (supports) 6 x length mm 1400, + 4 x length mm 1450 LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pump, capacity 140 m3/h) Clamps for workpieces fixing Safety side metal grids and front emergency carpets Motorized carpet to evacuate chips and wastes Separate electric and command cabinet No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) Banding group on board - (Y AXIS) Glueing Unit (P.U.R. Glue + Quick Melt unit) VT 100/100 with NORDSON premelter Edge coils supporting unit (No. 2 reels) OPTIONALS: N° 1 Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles N° 1 Circular saw (diam. mm 200) Fgedpfez Dtudex Al Sjh N° 1 Combined unit: Corner rounding / Edge scraping (with glue scraping extension)

Condition: used, Year of construction: 1991, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, overall weight: 1,100 kg, Equipment: saw blade guard, scorer, Altendorf F45 Panel Saw – Year of Manufacture 1991 For sale is an Altendorf F45 panel saw, year of manufacture 1991. The machine is equipped with electric height adjustment and electric tilting adjustment of the saw unit, thus offering comfortable operation for precise cutting work directly above the control panel. The machine is operated via the upper control unit. In addition, the F45 features a scoring saw and the proven Altendorf Duplex fence. Equipment: Fgedpfx Asz Ig Niel Sjh - Manufacturer: Altendorf - Model: F45 - Year of Manufacture: 1991 - Machine No.: 91-09-280 - Main motor: 5.5 kW - Scoring saw motor: 0.75 kW - Electric height adjustment - Electric tilting adjustment - Upper control - Scoring saw - Altendorf Duplex fence - Digital parallel fence, manually adjustable - Max. saw blade diameter: 350 mm, larger possible without a riving knife. - Panel sliding table - Rip and miter fence The machine shows signs of wear and tear commensurate with its age and is in used condition. The robust construction of the Altendorf F45 makes it a proven panel saw for use in carpentry and woodworking businesses. Inspection and test run possible by arrangement.

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Fjdpfx Aew El Nhol Ssgh

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, This 3-axis IMA BIMA 410 CNC Wood Machining Centre was manufactured in 2000. It features a working area of 3000 mm in X and 1200 mm in Y, with a maximum clamping height of 100 mm. The machine is equipped with an automatic central lubrication system and AC servo motors for precise operation. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 410 machine we have for sale. Contact us for further details. • Working area X: 3000 mm • Working area Y: 1200 mm • Max. clamping height Z1: 100 mm • Max. workpiece thickness Z2: depending on equipment/application • Table height: approx. 1000 mm • Pendulum operation X: 2 × 1400 mm • Free space center X: 200 mm • Pendulum operation alternative X: 2 × 900 mm • Free space center alternative X: 1200 mm • Machine weight: approx. 6000 kg • Guide system: precision linear guides hardened approx. 62 HRC • Central lubrication: automatic for all main axes and ball screw • Drive system: AC servo motors with encoder • X/Y drive: rack and pinion • Z drive: ball screw • Feed rate: 40 m/min • Rapid traverse X/Y: 80 m/min • Rapid traverse Z: 25 m/min • Acceleration: 3 m/s² • Extraction connection main spindle: 300 mm • Extraction connection drilling spindles: 120 mm Fodpfx Aezug Afol Sjgh • Air speed: approx. 28 m/s • Air volume: approx. 7080 m³/h • Vacuum pump capacity: 100 m³/h • Compressed air connection: 1/2" • Air pressure: 6 bar • Control voltage: 24 V DC • Connected load: approx. 24 kVA • Power supply: 3/N/PE 400/230 V 50 Hz • Frequency converter: 0–480 Hz • Ambient temperature: +15 to +35 °C • Control system: IMATRONIC NT 231 • Interpolation: linear all axes, circular 2.5D • Resolution: 0.001 mm • Spindle: HSK F63 • Tool clamping force: 11000 N • Max tool weight: 6 kg • Speed range: 1500–18000 rpm • Spindle power: 7.5 kW • Cooling: water cooled • CNC axis: 360° rotating • Tool magazine type: plate changer • Tool positions: 18 • Max tool length: 150 mm • Max tool diameter: 100 mm (150 mm with free сосед positions) • Max load: 60 kg • Saw unit motor: 1.5 kW • Saw speed: 5600 rpm • Saw blade diameter: max. 150 mm • Drilling unit: 14 spindles • Spindle stroke: 70 mm • Drive: 2.2 kW • Speed: 3150 rpm • Drill diameter max: 20 mm • Adapter head spindles: 4 • Speed max: 6000 rpm • Drill diameter max: 12 mm Table equipment: • 6 adjustable support arms • 12 suction cups 114 × 159 × 100 mm • 6 suction cups 125 × 75 × 100 mm • Vacuum system: 2-circuit clamping system • Electrical cabinet size: 2000 × 1800 × 600 mm DEFECT: • The main spindle no longer releases the interchangeable drill head

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, number of slots in tool magazine: 5, total height: 3,100 mm, overall weight: 7,500 kg, table length: 4,000 mm, table width: 1,200 mm, spindle motor power: 7,500 W, spindle speed (max.): 18,000 rpm, This 3-axis IMA BIMA 610 V CNC Wood Machining Centre was manufactured in 1996. It features a working area of 4000 mm in the X-axis and 1200 mm in the Y-axis, with a maximum drilling diameter of 45 mm. The machine is equipped with 5 drilling spindles in the X direction and 11 in the Y direction. If you are looking to get high-quality wood machining capabilities, consider the IMA BIMA 610 V machine we have for sale. Contact us for further details. • CNC Control: NUM CNC Control • Drive System: Siemens SIMODRIVE 611 • Maximum Workpiece Length: 4000 mm • Minimum Workpiece Length: 150 mm • Maximum Workpiece Width: 1650 mm • Minimum Workpiece Thickness: 10 mm • Maximum Workpiece Thickness: 65 mm • Drilling Spindles (X): 5 • Drilling Spindles (Y): 11 • Maximum Drilling Diameter: 45 mm • Main Spindle Power: 7.5 kW • Main Spindle Motor: Water-cooled • Tool Holder: HSK F63 DIN 69893 • Feed Drive Motor Power: 4 kW • Feed Speed: 1,500–18,000 mm/min • Maximum Tool Weight: 5 kg • Maximum Tool Clamping Force: 10,000 N • Operating Voltage: 400 V ±5% • Supply Voltage: 3/N/PE, 400 V, 50 Hz • Frequency: 50 Hz • Total Connected Load: 33 kVA • Rated Power: 41 kW • Rated Current: 62 A • Connection Cross Section: 16 mm² • Control Voltage: 24 V • Control Current: 52 A • Compressed Air Pressure: 6–10 bar • Air Connection: 1/2" • Required Air Consumption: 28 m³/h • Dust Extraction Connection: Ø100–300 mm • Air Flow Ø100: 14 m³/min • Air Flow Ø140: 28 m³/min • Air Flow Ø160: 36 m³/min • Air Flow Ø180: 46 m³/min • Air Flow Ø200: 56 m³/min Fgsdpfx Aszug Aljl Ssh • Air Flow Ø280: 105 m³/min • Air Flow Ø300: 127 m³/min • Number of Dust Extraction Ports: 1 • Machine Condition: Disassembled but fully functional Optional Equipment, not included: • Vacuum block suction cups (aluminum) and sliding console • Two milling spindles for synchronous milling with integrated tool changers • Safety fence with associated safety mats • Control cabinet and operating unit • Waste conveyor belt for milled sections

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES Fodpfx Aszc E A Iel Segh SECURITY CARPETS SECURITY NORME CE MARK

Condition: used, This listing is for a IBICO Ibimaster 300 Multifunctional Comb Binding Machine The unit is in full working condition and is ready for immediate release. Specifications & Features It’s a multi‑functional binding machine that can both punch and bind documents. Canterbury Used Office Furniture Punching capacity: 21‑hole: ~ 20 sheets of 80 gsm paper at once 4‑hole (for e.g. 4‑hole filing): up to ~ 30 sheets Fedexv Ackopfx Al Sjgh Binding capacity: Up to ~ 500 sheets (80 gsm) using a 51 mm plastic comb Maximum punching width: ~ 315 mm (fits A4 / A5 width) Dimensions & weight (from used listing): ~ 425 × 125 × 425 mm, weight ~ 10.8 kg It supports simultaneous punching and binding thanks to its combined design

Condition: used, Year of construction: 1969, machine/vehicle number: 5700, functionality: fully functional, ram plate width: 1,350 mm, ram plate length: 3,000 mm, year of last overhaul: 2011, This OTT veneer and carcass press impresses with its robust industrial design and an exceptionally large press format of 3,000 × 1,350 mm, featuring 2011 new heating plates. While many presses offer only a press width of 1,200 to 1,300 mm, this machine enables the processing of particularly large workpieces and special formats. Fsdjz Dq S Hjpfx Al Sogh A major advantage is the 2011 renewal of the heating plates by ELKOM, which significantly upgraded the press technically and ensures its continued reliable operation. The OTT press is ideally suited for carpentry workshops, joineries, interior fitters, as well as manufacturers of doors, stairs, and furniture. Thanks to its stable hydraulic construction, it offers uniform pressure distribution and is suitable for both veneer work and demanding gluing of solid wood and composite materials.

Condition: used, Convection oven and steamer in one, with stand Fedpjz Ndbfsfx Al Segh The Leventi Combimat DGT is a combi steamer that cooks with steam, hot air or a combination of both. That lets you prepare meat, fish, vegetables and bakery products in a single unit, from gentle steaming to crisp baking. The oven sits on a stainless stand with tray runners and a pull-out work shelf. We did not find a rating plate with the year or capacity. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Combi steamer Cooking modes: Steam, hot air or combination Controls: Digital panel with display Construction: Stainless steel, on stand with tray runners and pull-out shelf

Condition: used, functionality: fully functional, DEBIMATIC crosscut saw Machine description coming soon. Fodpfx Ajz I It Aol Sogh

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process Fsdpjw A Ruqjfx Al Sjgh No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Condition: used, power: 2.21 kW (3.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 410 mm, cutting width (max.): 480 mm, control type: manual, roller diameter: 500 mm, pivoting range: 46 °, actuation type: electric, rotational speed (max.): 900 rpm, overall weight: 250 kg, table height: 850 mm, SAC BW 500 Band Saw For sale is a robust SAC BW 500 band saw for professional woodworking. The machine impresses with its solid construction and generously sized work table. The band saw table is made of gray cast iron, heavily ribbed, precisely planed, and adjustable in angle. The band saw features mechanical height adjustment, a blade tension indicator, and an upper precision band saw guide. The parallel fence can be used on both the left and right sides of the band saw blade. Features: - Manufacturer: SAC - Model: BW 500 - Wheel diameter: 500 mm - Cutting width: up to approx. 480 mm - Cutting height: up to approx. 410 mm - Table size: 550 x 700 mm - Table height: approx. 850 mm - Band saw length: approx. 4,100 mm - Blade dimensions: 25 x 4/10 mm Fjdpfx Ajz Ig Ryjl Sjgh - Wheel speed: 900 rpm - Motor power: 3 HP - Mechanical height adjustment - Blade tension indicator - Rubber tires - Adjustable gray cast iron table - Dust extraction port - Upper precision band saw guide - Telescopic guard - Motor protection switch with undervoltage release - Electrical system according to VDE 0113 - Parallel fence can be used on both sides The technical specifications correspond to the SAC product brochure for the BW 500. It describes, among other things, the solid gray cast iron construction of the wheels and the table, as well as the rubber tires for smooth and precise operation. sac_bw_de The machine is in used condition, with signs of wear consistent with its age. Ideal for carpenters, joiners, and woodworkers looking for a solid and durable band saw. Inspection and test run possible by arrangement.

Condition: used, Year of construction: 1994, Storage location: Nattheim Fgodpfx Aswmm Nrjl Sjh

Condition: used, machine/vehicle number: 2001 5170, For sale is a KUPER FWJ 900 veneer assembly machine manufactured in Germany. The machine is in good, well-maintained used condition and is immediately ready for professional use in veneer processing. The FWJ 900 operates with glue threads and hot air and is suitable for assembling or joining veneer sheets. The machine has an overhang of 900 mm and is operated via a foot pedal. Technical data: Manufacturer: KUPER Type: FWJ 900 Machine number: 20015170 Overhang: 900 mm Process: Veneer assembly with glue threads Heating: Hot air Feed rate: approx. 7 m/min Veneer thickness: approx. 0.4–2.0 mm Operation: Foot pedal Stationary model Compressed air connection: available Fedpfx Aoz Ep R Rol Segh Includes a large work table in front of the machine Includes a work table behind the machine Inspection and functional testing possible while powered on The existing work tables offer a generous support area and are ideal for processing larger veneer sheets. The machine can be inspected on-site while powered on and its functionality can be tested.

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit Fgjdpfx Alszux Tio Ssh - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, saw blade guard, scorer, Altendorf F 45 – Panel Saw | ElmoDrive | EvoDrive | ProDrive | HAND GUARD The Altendorf F 45 is one of the highest-quality and most versatile panel saws for professional use in carpentry shops, joineries, interior design, furniture manufacturing, and industrial wood processing. The F 45 impresses with its high precision, robust design, user-friendly operation, and numerous configuration options. Depending on the configuration, it is available with ProDrive, EvoDrive, or the comprehensive ElmoDrive control system. For the highest demands on work safety, the F 45 is also available with the innovative Altendorf HAND GUARD safety system. EQUIPMENT VARIANTS Altendorf F 45 ProDrive Comfortable and clear operation at eye level. The pivoting control unit enables ergonomic operation and precise adjustment of machine functions. Fgjdpfxez Nmvae Al Sjh Altendorf F 45 EvoDrive Control system with a 7" touchscreen and separate keyboard for comfortable entry of numerical dimensions. The machine axes can be quickly and precisely adjusted. Altendorf F 45 ElmoDrive The most comprehensive control system variant of the F 45. The large 12" touchscreen allows axes and numerous software functions to be conveniently selected and controlled. Altendorf F 45 HAND GUARD For the highest safety requirements, the HAND GUARD is available on the basis of the F 45 with the optical safety system. The camera technology recognizes hands or hazardous situations in the area of the saw blade. In the event of a hazard, the saw unit is lowered, and the saw blade is stopped. After activation, the machine is immediately ready for use again. The HAND GUARD variant is equipped with ElmoDrive. TECHNICAL DATA • Manufacturer: Altendorf • Model: F 45 • Machine type: Panel saw • Control systems: ProDrive / EvoDrive / ElmoDrive • Safety system: optional HAND GUARD • Main motor: depending on the configuration, 5.5 – 11 kW • Saw blade diameter: up to max. 450 mm, larger sizes also possible • Saw blade overhang: up to max. 204 mm • Swivel range: 0 – 46°, double-sided TwinFlex swivel also possible • Working height: approx. 850 / 880 / 910 mm • Double roller carriage: up to 3,000 mm • Cutting length: up to 5,000 mm • Cutting width: up to 1,600 mm • CNC parallel fence: optional • CNC angle mitre fence: optional • Tool clamping system: AKE EQUIPMENT AND FUNCTIONS Depending on the configuration, the following are possible: • electromotive height and swivel adjustment • automatic correction of the cutting height during swiveling • motorized or CNC-controlled parallel fence • CNC angle mitre fence • double roller carriage and various carriage lengths • different motor powers • scoring system • various saw blade diameters • RIP FENCE SECURITY • Altendorf HAND GUARD safety system CNC PARALLEL FENCE The CNC-controlled parallel fence enables quick and highly precise positioning. According to the manufacturer, the system achieves a travel speed of up to 250 mm/s with a dimensional accuracy of ± 0.1 mm. AREAS OF APPLICATION Carpentry shops, joineries, furniture manufacturing, interior design, shop fitting, solid wood and panel processing, as well as plastic, aluminum, and industrial wood processing. Inspection and demonstration available by appointment. Nationwide transport, commissioning, and training available upon request.

Condition: good (used), Year of construction: 2007, functionality: fully functional, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: scm, total height: 3,200 mm, total length: 5,300 mm, total width: 3,000 mm, overall weight: 4,500 kg, table length: 3,100 mm, table width: 1,250 mm, year of last overhaul: 2024, Equipment: CE marking, SCM Record 110 AL Prisma 5-Axis CNC Machining Center | Year of manufacture 2007 | Immediately ready for operation | Complete with tool package For sale is an SCM Record 110 AL Prisma, a powerful 5-axis CNC machining center from the year 2007. The machine was in continuous operation until disassembly and can, of course, be inspected and tested while powered on. It operates reliably and precisely and is ideally suited for furniture, interior design, stair and door manufacturing. A detailed video demonstrating its functionality is available on YouTube and shows the machine in operation for approximately 30 minutes. Included in the scope of delivery: ✔ SCM Record 110 AL Prisma 5-Axis CNC Machining Center, equipped with tools. ✔ Complete set of machine tools ✔ Tool magazine ✔ Vacuum pump ✔ All vacuum cups ✔ Special vacuum cups for door processing (see video & images) ✔ Machine control PC ✔ All existing machining programs remain on the computer The machine is therefore sold complete and ready for operation. The PC from the office with PaletteCAD license can also be purchased. The video demonstrates, among other things: Manufacturing of a complete cabinet side Machining of a center panel Milling of an outer contour Milling of a rectangular pocket Fgjdpfx Alsz Dq Tqj Soh True 5-axis machining Creating an exact 90° internal corner using a 60° chamfering cutter The video impressively demonstrates the precision and technical condition of the machine. Technical data Manufacturer: SCM Model: Record 110 AL Prisma Year of manufacture: 2007 5-axis machining Vacuum table Tool changer Control PC included CE version Condition The machine is in good condition and was in daily use until disassembly. Inspections and a test run are expressly welcome after prior arrangement. Disassembly / Loading Approximately one week of lead time should be planned for the disassembly of the machine. We will, of course, assist with the organization of shipping/transport, which can be arranged and commissioned if required. The costs will be borne by the buyer. We can also disassemble the machine and load it for you. Sold on behalf of a customer by Bima Maschinen. The machine is located in Luxembourg, near the German border. An invoice as an intra-community supply is possible if the location is outside of Luxembourg, within the EU.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, operating hours: 80,859 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,630 mm, TECHNICAL DETAILS X-axis travel without edge banding: 6,000 mm X-axis travel with edge banding: 5,000 mm Fedpfxex Af Ivj Al Ssgh Y-axis travel: 1,300 mm Y-axis travel with main spindle + tool diameter 20 mm: 1,630 mm Y-axis travel with edge banding: 1,450 mm Clamping table: Dyna Poin BIMA 410 V Number of positions: 4 Edge banding unit: available Operating hours: 80,859 h