Used Pointer 380 Sl for sale (6,731)

Condition: good (used), three-jaw chuck diameter: 380 mm, through hole: 100 mm, Metal cutting Tooling POINTER - 380 SL MACH-ID 2995 Make: POINTER Ncjdpjzdii Iefx Agpeu Type: 380 SL Diameter: 380mm 3 Chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, mileage: 120,000 km, first registration: 10/1984, fuel type: gasoline, color: grey, gearing type: automatic, number of seats: 2, Equipment: ABS, air conditioning, central locking, Mercedes Benz 380 SL/Cabrio EX USA vehicle Newly restored New fenders/trunk lid etc.. Alloy wheels Air condition Hardtop etc..... Ncodpsudgm Ijfx Agpou

Condition: good (used), machine/vehicle number: 0159, Year of construction: 2017, Cummins QSL9 380 from Uniktruck Ncedpfxjyuhf Aj Agpou

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Nedpfxji Rixke Agpocu Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: excellent (used), A robust industrial sewing machine from the renowned German brand Dürkopp, model 560-38. Designed for sewing leather, leather goods, upholstery, belts, bags, suitcases, and other heavier materials. The machine is mounted on a sturdy work table and equipped with a Consew clutch motor. Technical specifications: Manufacturer: Dürkopp Model: 560-38 Power supply: 380 V Motor: Consew MT-M2 Motor power: 0.37 kW (1/2 HP) Motor speed: 1425 rpm Clutch drive Work table included Intended use: leather, upholstery, technical materials Njdpfx Aszgu Dzjgpecu Condition: Used machine. Visual condition as shown in the pictures.

Condition: excellent (used), For sale: robust BT2 bench drill of industrial manufacture – a classic, very durable design from the era of the former GDR (East Germany). ✅ Condition: ✔️ Used ✔️ Fully operational ✔️ Shows normal signs of use (scuffs, scratches – visible in the photos) ✔️ Complete machine 🔩 Technical specifications: Model: BT2 Power supply: 380V / 3 phase / 50 Hz Power: approx. 1.1 kW Manufacturer: VEB Werkzeugmaschinenfabrik Saalfeld (GDR) Weight: approx. 180 kg Speed adjustment + manual feed ⚙️ Features: Very robust, heavy construction Stable operation – ideal for workshop and production use Easy to operate and service Exceptionally durable "workhorse" machine 📦 Included: ✔️ BT2 bench drill ✔️ Worktable ✔️ Drill chuck Ncsdpoyzum Iofx Agpju 🌍 Country of origin: 🇩🇪 Germany (East Germany) ℹ️ Additional information: On-site inspection available Perfect for workshop, metalworking, or production Transport possible (pallet / shipment)

Condition: used, functionality: fully functional, spindle bore: 165 mm, For sale: heavy-duty CNC lathe XYZ SL 1100 / 1500 mm in very good condition. The machine was purchased in 2019 and is ideal for machining large and heavy workpieces in single-piece and small-batch production. Technical specifications Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Year of manufacture: 2019 Control system: Siemens ShopTurn / Siemens CNC 840D Centre distance: 1,500 mm Maximum swing over bed: 1,100 mm Spindle bore: 165 mm Main drive: 70 kW Speed range: up to 660 rpm Bed width: 558 mm Tailstock fitted Automatic central lubrication Coolant system Full enclosure Heavy-duty cast iron machine bed Nsdpfjzba N Hsx Agpecu Electric tailstock Large chuck Solid heavy-duty lathe design Safety enclosure Coolant system Work area lighting Applications: The XYZ XL/SL series has been specially developed for machining large and heavy workpieces. The solid cast iron construction, high spindle power and large spindle bore enable the cost-effective machining of: Shafts Flanges Rollers Hydraulic components Machine components Steel and cast components The series is designed for workpiece weights of several tonnes and ranks among the heavy-duty industrial machine tools in its class. Condition The machine is in good condition No visible damage Viewing available by appointment Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, We offer used pallet racking here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustment grid: 70/70 mm Color: blue The uprights are pre-assembled (bolted framework) Beam width: 2,830 mm (clear width) Beam type: RTS Box profile: 110 x 50 mm Color: orange Load capacity: 3,000 kg per beam pair PRICES Basic bay: €595.10 net (2 frames + 10 beams) Extension bay: €382.55 net (1 frame + 10 beams) QUANTITY DISCOUNTS Basic bay 1 - 5 units: €595.10 net Basic bay 6 - 20 units: €571.30 net Basic bay 21 - 50 units: €547.49 net Basic bay from 51 units: €523.69 net Extension bay 1 - 5 units: €382.55 net Extension bay 6 - 20 units: €367.25 net Extension bay 21 - 50 units: €351.95 net Extension bay from 51 units: €336.64 net PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon in the event of an order. The price is understood to be the unit price/net price, or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, material handling equipment, storage platforms, textile storage, as well as machines for the retail, industrial, and craft sectors. Ncedpfx Aoy Dgdqjgpeu We continuously offer interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Condition: used, We offer used pallet racking systems here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustment grid: 70/70 mm Color: blue The uprights are pre-assembled (bolted truss) Beam width: 2,830 mm (clear width) Beam type: RTS Box profile: 110 x 50 mm Color: orange Load capacity per beam pair: 3,000 kg PRICES Base unit: €595.10 net (2 frames + 10 beams) Extension unit: €382.55 net (1 frame + 10 beams) QUANTITY DISCOUNTS Base unit 1 - 5 units: €595.10 net Base unit 6 - 20 units: €571.30 net Base unit 21 - 50 units: €547.49 net Base unit 51+ units: €523.69 net Extension unit 1 - 5 units: €382.55 net Extension unit 6 - 20 units: €367.25 net Extension unit 21 - 50 units: €351.95 net Extension unit 51+ units: €336.64 net PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will gladly assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is stated as a unit price/net price or as specified in the product description (plus VAT). You will, of course, receive an invoice with VAT shown separately. Ncjdey Dgdwspfx Agpou ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, material handling technology, storage platforms, textile storage, as well as machinery for retail, industry, and trades. We continuously offer interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us.

Condition: used, We offer used pallet racking systems here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustment grid: 70/70 mm Color: blue The uprights are pre-assembled (bolted frame) Beam width: 2,830 mm (clear width) Beam type: RTS Box profile: 110 x 50 mm Color: orange Load capacity per beam pair: 3,000 kg PRICES Basic bay: €595.10 net (2 frames + 10 beams) Extension bay: €382.55 net (1 frame + 10 beams) QUANTITY DISCOUNTS Ncodpfx Aey Dgcysgpeu Basic bay 1 - 5 units: €595.10 net Basic bay 6 - 20 units: €571.30 net Basic bay 21 - 50 units: €547.49 net Basic bay from 51 units: €523.69 net Extension bay 1 - 5 units: €382.55 net Extension bay 6 - 20 units: €367.25 net Extension bay 21 - 50 units: €351.95 net Extension bay from 51 units: €336.64 net PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We will be happy to assist you with the transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon in the event of an order. The price is quoted as a unit price/net price or as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, material handling technology, storage platforms, textile storage, and machines for retail, industry, and crafts. We continuously offer attractive used products from various manufacturers/brands at competitive prices. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), For sale: Industrial electric motor from the renowned manufacturer BBC (Brown Boveri). Robust, heavy-duty motor designed for continuous operation under demanding industrial conditions. Classic BBC construction—very durable and reliable. The unit is in good technical condition and fully operational. Normal signs of use are visible. Technical data: Manufacturer: BBC (Brown Boveri) Model: GU180 M4AG Power: 18.5 kW Supply voltage: 3~ 380/660 V Speed: 1460 rpm Frequency: 50 Hz Protection class: IP54 Njdoyvi Ngspfx Agpecu Insulation class: B cos φ: approx. 0.85 Mounting: IM B3 (foot-mounted) Condition: Used Fully functional Normal signs of use Good overall condition

Condition: new, For sale: Industrial electric motor, 7.5 kW, flange-mounted design. Ncodpeyv Utksfx Agpju The motor comes from warehouse stock and has never been used. Visible storage marks and significant rust on the housing – condition as shown in the photos. Ideal for industrial applications, pumps, fans, machinery, and production equipment. Technical data: Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 380–420 V Frequency: 50 Hz Power supply: 3-phase Cos φ: 0.86 Protection class: IP55 Insulation class: F Weight: approx. 65 kg Flange-mounted design Dimensions: Flange diameter: approx. 300 mm Shaft diameter: approx. 38 mm Condition: New old stock Never used Visible rust on the housing

Condition: used, Year of construction: 2008, workpiece weight (max.): 700 kg, INDUSTRIAL MARKEE 6-SPINDLE CENTRIFUGAL POLISHING MACHINE (2008) Industrial centrifugal polishing machine with 6 spindles, manufactured by INDUSTRIAL MARKEE SL (Spanish manufacturer), year 2008. From industrial company liquidation in Spain (insolvency proceedings) – not from a breakdown. ═════ SPECIFICATIONS ═════ - Manufacturer: INDUSTRIAL MARKEE SL (Spanish polishing equipment specialist) - Year of manufacture: 2008 - Type: Centrifugal polishing machine - Configuration: 6 spindles (heads) - Power supply: 380V three-phase, 50 Hz - Construction: Heavy-duty industrial steel frame - Multiple polishing heads working simultaneously - Designed for medium to high production runs ═════ APPLICATIONS ═════ Suitable for industrial polishing of: - Metal parts (steel, stainless steel, aluminum, brass, copper) - Cutlery and tableware production - Tap fittings, valves, and brass components - Plumbing fittings (taps, faucets, fittings) - Cookware (pots, pans, kitchenware) - Architectural metal components - Decorative metal objects - Hardware and tool finishing The 6-spindle configuration allows simultaneous processing of multiple parts, ideal for medium production volumes. ═════ CONDITION ═════ - Used, from industrial closure (NOT from a breakdown) - Year 2008 (~17 years old) - structural condition good - Heavy-duty industrial construction designed for long-term use - Sold as-is, full inspection welcome before pickup - Polishing wheels/heads condition: variable, may need replacement (standard consumables, available worldwide) - Motor and bearings condition: to be verified during inspection - No original manual included ═════ ABOUT THE MANUFACTURER ═════ INDUSTRIAL MARKEE SL is a Spanish manufacturer specializing in polishing and finishing equipment. Spare parts and technical consultation are available through the local Spanish industry network. ═════ KEY ADVANTAGES ═════ ✓ Robust industrial construction ✓ Multi-spindle configuration (6 heads) for higher production output ✓ Heavy frame designed for stability during polishing ✓ Standard 380V industrial power supply ✓ Mechanically simple – easy to maintain and service ✓ Polishing consumables (wheels, compounds) widely available Njdpozcmgbofx Agpocu ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Barcelona, Spain - Weight: approximately 500-700 kg - Dimensions: medium-large industrial machine - Loading: forklift required - Pallet or pre-packed for transport possible - Inspection welcome by appointment - Payment: 100% bank transfer in advance - Documents: commercial invoice, sold as-is - International shipping possible – buyer arranges transport - Container loading possible (LCL or FCL) ═════ COMPARATIVE VALUE ═════ A new equivalent 6-spindle centrifugal polishing machine in 2026 costs €15,000-25,000. This used unit offers similar production capability at a fraction of the cost.

Condition: good (used), Händi P3 consisting of 78 galvanized uprights (480 cm x 105 cm) and 253 grey beams (270 cm x 10 cm). Of these, 11 uprights are slightly damaged. Robering SLP SL consisting of 53 uprights (400 and 450 cm x 110 cm) and 266 orange beams (270 cm x 11 cm). For sale only as a complete package. Ncodpfxoywd Rns Agpju

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-240-08-3231, functionality: fully functional, Our Profi HPL 380/38/22/X saw is a brilliant well maintained saw the machine has auto infeed from stacks of board at the back and also a Auto stack at the front for strips. The machine can be run with or with out the auto de-stacker has been well looked after regular serviced by a Homag Uk engineer. I have videos of the saw working so please email me for them. Nedpezgcnnsfx Agpocu

Condition: good (used), mileage: 1,015,859 km, power: 279 kW (379.33 HP), first registration: 03/2010, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,980 mm, total width: 2,550 mm, total height: 3,500 mm, loading space length: 7,650 mm, loading space width: 2,490 mm, loading space height: 2,060 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Short cab - Tail lift - Manual - Radio/cassette - Fabric - Central lubrication = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 9,610 kg, Unladen weight: 9,890 kg, Gross weight: 19,500 kg, Total fuel tank capacity: 530 liters, Trailer coupling, Unbraked trailer load: 750 kg, Center axle trailer load, braked: 18,067 kg, King pin diameter: 50 DIN, Fifth wheel: Fixed, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Multicolor, Heated mirrors, Lighting type: Halogen lamp, Flashing lights, Engine power: 279 kW (374 hp), Fuel: Diesel, Euro: 5, Transmission type: Optidriver, Gears: 12, Power steering, ABS, ASR, Starter battery, System type: ., Central locking, Seats: 2, Seating configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift configuration: Rear flap, Tail lift capacity: 3,000 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift dimensions: 210x252, Battery for ramp = Further Information = Axle Configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steering; Tire tread left: 9 mm; Tire tread right: 7 mm; Suspension: Leaf spring Axle 2: Twin-tired; Tire tread left inner: 14 mm; Tire tread left outer: 15 mm; Tire tread right inner: 14 mm; Tire tread right outer: 13 mm; Suspension: Air suspension Weights Unladen weight: 9,890 kg Payload: 9,610 kg gross vehicle weight: 19,500 kg Functional Tail lift: Dhollandia, rear flap, 3,000 kg Loading platform height: 122 cm Condition Technical condition: good Optical condition: good Damages: none Number of keys: 2 Njdpfjy N Rkfex Agpjcu Identification License plate: BX-LD-48 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer includes all European makes, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Good pricing • Reliable business dealings • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are arranged quickly • Expert technical services • The assurance of “recognizable quality” • And more ... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: excellent (used), Julabo Type: FP51-SL (v.2) Cryostat for low temperatures below -50 °C with a bath opening for internal and external temperature control. Nsdezgaa Iepfx Agpscu Cryostat circulators from the HighTech series, with HL or SL thermostats, are equipped with powerful pressure and suction pumps. The devices offer the full range of functions of the professional HighTech thermostat series. Technical data for FP51-SL Dimensions and volume Dimensions (W × D × H) 46 x 55 x 89 cm Filling volume 7.5 ... 12 l Weight 90 kg Pump connection thread M16x1 external thread Temperature values: Working temperature range -51 ... +200°C Temperature stability ±0.05°C Setting of the temperature display resolution 0.01°C Temperature display resolution 0.01°C Permissible ambient temperature +5 ... +40°C Supply voltage 400V/3PNPE/50Hz (plug 16A CEE) (R507) Performance data: Heating power 3 kW Cooling power 20 °C 2kW, 0°C 1.5 kW, -20°C 1 kW, -40°C 0.26 kW Refrigerant R507 Global warming potential 3985 Filling weight 1030 g Carbon dioxide equivalent 4.10455 t Pump performance Flow rate 22 ... 26 l/min Pump performance Delivery pressure 0.4 ... 0.7 bar Maximum suction capacity 0.2 ... 0.4 bar Viscosity max. 70 cSt Current consumption 16 A Electronics Interfaces Profibus optional Pt100 External sensor connection integrated Integrated program generator 6x60 steps Temperature control ICC Absolute temperature calibration 3-point calibration Temperature display VFD Temperature setting Keypad Voltage variants 400V/3PNPE/50Hz (plug 16A CEE) (R507) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2008, operating hours: 10,113 h, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 156 cm³, injection pressure: 2,429 bar, total length: 6,000 mm, total width: 1,700 mm, total height: 2,190 mm, clamping force: 1200 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 780 x 735 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 850 mm opening stroke: 400 mm screw diameter: 35 mm swept volume: 156 ccm injection pressure: 2429 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Nodpfx Ajzgt E Rjgpjcu measures of machine l x w x h: 6m x 1.7m x 2.19m total weight: 9700KG

Condition: excellent (used), Year of construction: 2008, operating hours: 49,673 h, functionality: limited functionality, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 154 cm³, KRAUSS MAFFEI KM 80-380 EX Stock No.: 503232 Manufacturer: KRAUSS MAFFEI Ncodpszgt Eqjfx Agpou Type: KM 80-380 EX Control unit: MC5 Year of manufacture: 2008 Operating hours: 49,673 h Technical Data - Clamping Unit Clamping force: 800 kN Tie bar spacing (H x V): 520 x 420 mm Platen size (H x V): 640 x 740 mm Minimum mold height: 300 mm Maximum platen distance: 790 mm Ejector stroke: 100 mm Ejector force: 22 kN Centering diameter moving platen: 125 mm Centering diameter fixed platen: 125 mm Technical Data - Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 2,429 bar Screw L/D ratio: 23 l/d Screw speed: 477 min⁻¹ Specific injection rate: 289 g/s (GPPS) Number of heating zones: 5 Dimensions & Weight Machine dimensions (LxWxH): 5.35 m x 1.7 m x 2 m Total weight: 6,500 kg Equipment Display language: German CEE outlet 16A 1x air valve Machine with material hopper Machine with water battery Levelling elements EUROMAP 67 handling interface USB interface Schuko socket 10A 24x tool heating circuits

Condition: used, axle configuration: 3 axles, first registration: 05/2005, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 8370 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2005, Cooling unit manufacturer: Thermoking, Cooling unit model: SL_200e, Cooling unit: Diesel/electric, Wall thickness: 45 mm, Cooling type: Refrigerated, Axle type: MERCEDES-BENZ, Thermoking SL 200e Trailer – Damaged FRIGO – Operational! = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual transmission Axle Configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 3 mm; Tire tread depth right: 1 mm Axle 3: Tire tread depth left: 4 mm; Tire tread depth right: 2 mm Weights Tare weight: 8,370 kg Payload: 30,630 kg GVW: 39,000 kg Functional Cooling unit: Diesel and electric Wall thickness: 45 mm Environmental Emission class: Euro 0 Condition Overall condition: Average Technical condition: Average Optical condition: Average Damage: Damaged vehicle (not roadworthy) = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands, models, and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • Good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Ncjdpfxox A Sy Ej Agpsu Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, mileage: 354,267 km, power: 279 kW (379.33 HP), first registration: 04/2014, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 5,450 mm, loading space width: 2,490 mm, loading space height: 600 mm, Year of construction: 2014, Equipment: air conditioning, crane, electric window regulation, Technical information Number of cylinders: 6 GVW: 26.000 kg Drivetrain Drive: Wheel Make of engine: Renault Axle configuration Tyre size: 315/80R22.5 Front axle: Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Ncodpfx Aszgu Hpjgpou Rear axle 2: Suspension: air suspension Functional Mast: telescopic (3 parts) Make of bodywork: PALFINGER PK 16001-K Tipper: Back = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, mileage: 564,536 km, first registration: 07/2003, tire size: 315/80 R22.5, axle configuration: 8x4, wheelbase: 5,150 mm, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 9,900 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2003, Equipment: cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - CD player - Aluminum fuel tank - Sun visor - Alternating current - Tool box = Additional Information = Axle configuration Tire size: 315/80 R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle 1: Steered; Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Front axle 2: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 7 mm Rear axle 1: Dual tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 5 mm; Tire tread depth right inside: 6 mm; Tire tread depth right outside: 6 mm; Reduction: External planetary axles Rear axle 2: Dual tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 3 mm; Tire tread depth right inside: 5 mm; Tire tread depth right outside: 5 mm; Reduction: External planetary axles Weights Unladen weight: 14,400 kg Payload: 17,600 kg GVWR: 32,000 kg Condition Damage: None Nodpfxezgmvie Agpecu

Condition: used, mileage: 508,985 km, power: 279 kW (379.33 HP), first registration: 11/2011, fuel type: diesel, tire size: 13r22.5, axle configuration: 6x4, wheelbase: 5,500 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, suspension: steel, total length: 10,000 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2011, Equipment: ABS, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - CD player - Aluminum fuel tank - Sun visor - Alternating current Nedpfxozglx Ae Agpocu - Toolbox = Further Information = Brakes: Drum brakes Suspension: Leaf suspension Front axle: Tire size: 13R22.5; Steered; Left tire tread: 2 mm; Right tire tread: 2 mm Rear axle 1: Tire size: 13R22.5; Twin tyres; Left inner tire tread: 12 mm; Left outer tire tread: 12 mm; Right inner tire tread: 12 mm; Right outer tire tread: 12 mm; Reduction: Outboard planetary axles Rear axle 2: Tire size: 13R22.5; Twin tyres; Left inner tire tread: 12 mm; Left outer tire tread: 12 mm; Right inner tire tread: 12 mm; Right outer tire tread: 12 mm; Reduction: Outboard planetary axles Unladen weight: 14,200 kg Payload: 11,800 kg Gross vehicle weight: 26,000 kg Damages: none

Condition: used, mileage: 513,463 km, power: 279 kW (379.33 HP), first registration: 02/2014, fuel type: diesel, tire size: 315/80, tire condition: 30 %, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2014, Equipment: ABS, air conditioning, crane, = Additional options and accessories = - Leaf spring = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Rotator: ✓ Meter capacity: 10.3 m = More information = Ncodpjzghgvsfx Agpsu Suspension: leaf suspension Front axle: Tyre size: 315/80; Steering; Tyre profile: 30% Rear axle 1: Tyre size: 13R22.5; Double wheels; Tyre profile: 40%; Reduction: hub reduction Rear axle 2: Tyre size: 13R22.5; Double wheels; Tyre profile: 40%; Reduction: hub reduction Crane: HIAB 166 B-3 HIDUO, year of manufacture 2014, on rear of chassis

Condition: used, mileage: 513,463 km, power: 279 kW (379.33 HP), fuel type: diesel, tire size: 315/80, tire condition: 30 %, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, Year of construction: 2014, Equipment: ABS, air conditioning, crane, = Additional options and accessories = - Leaf spring = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Rotator: ✓ Meter capacity: 10.3 m = More information = Suspension: leaf suspension Nedpfxezgg Tho Agpscu Front axle: Tyre size: 315/80; Steering; Tyre profile: 30% Rear axle 1: Tyre size: 13R22.5; Double wheels; Tyre profile: 40%; Reduction: hub reduction Rear axle 2: Tyre size: 13R22.5; Double wheels; Tyre profile: 40%; Reduction: hub reduction Crane: HIAB 166 B-3 HIDUO, year of manufacture 2014, on rear of chassis