Used Presto Gmbh & Co. Kg Hpk 50 B for sale (116,767)

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Itodpfxeyplwfs Am Esf Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Isdsu Tha Iopfx Am Estf Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Itedpfxeu Thh Eo Am Esf

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Itsdpfx Aendn Agem Eof Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. Ijdpfx Amsng Exao Ejtf POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm Itedpfxeyzxfns Am Esf • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: new, Year of construction: 2025, Abrasive Media Preparation 1x Sweeping Pit 1x Bucket Elevator 1x Air Separator 1x Electric Vibrating Sieve 1x Abrasive Media Hopper 1x 200l Pressure Blast Unit 1x Blast Hose, Blast Nozzle, Deadman Switch, Control Line 1x Control Cabinet Optional Accessories: - Cross Conveyor Screw over the entire blast room width (also serves as additional buffer storage for several hours of blasting) Itjdpfx Amew Ivvcs Eef - Extension for 2 abrasive media types, ferritic and mineral - Drum Magnetic Separator - Final Demagnetizing Stage - Magnetic Drawer

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Iedew Ivk Tspfx Am Estf Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 15,000 mm, inner dimension height: 5,000 mm, filter area: 352 m², volume flow: 22 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. Ijdpfx Aju Hy Tpjm Estf 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Blast carriage 10t for blasting system with pneumatic drive. - Pneumatic drive for 10t load capacity Isdpeyyxfrofx Am Eetf - Load capacity: 10 t - Dimensions: L=2000mm W=2000mm H=500mm - For rail system - With mounting surfaces for workpiece holders - Rotary table as an option

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Itedpex R Uzdofx Am Eof Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. On site viewing and inspection recommended

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system - Turntable with prism for pipe support placement - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function Iedpfx Aeyn Inwem Ejtf - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2026, Pressure blasting cabin 4-axis controlled cleaning of moulds, steel rings, ingot moulds in the aluminum, tire mold, pressing tools, etc. The travel of the jets is freely programmable. 2 PCs automatic nozzle and 1 St. hand nozzle for cleaning the parts. HARDOX turntable and feed screw for long-lasting use of the blasting machine. For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts. Iodpfxodrtane Am Eetf

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Itedpovtpq Hsfx Am Ejf Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Iodpfx Ameynr E To Estf Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover - Water separator - Pressure regulator - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m Itodeynr E Hepfx Am Esf - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Itsdpoynr Emsfx Am Eef Manufactured in Germany

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Iedpfxoyt Nm Sj Am Estf Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: excellent (used), Year of construction: 2017, operating hours: 150,050 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: iTNC530, rotary table diameter: 500 mm, overall weight: 13,000 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 6,950 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 60, Equipment: chip conveyor, oil mist separator, rotational speed infinitely variable, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm Iedpfox Hg Ibsx Am Estf • Tool magazine: 60 stations, HSK-A63 • Internal coolant supply: 20 bar, with band filter system • Coolant system: Automatic coolant level monitoring • Air through spindle • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe system), incl. workpiece measurement preparation • Collision monitoring: POS DCM module • Media feed: 3-channel media feed in the center of the table • Viewing: Rotary inspection window • Handwheel Please send us an inquiry directly via our website if you are interested in the machine. Due to technical reasons, direct inquiries for a quotation via third-party platforms are difficult and may be delayed.

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Itodew Ivp Nspfx Am Ejf

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Ijdpfjw Ivpvex Am Eetf

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 4,000 mm, inner dimension length: 6,000 mm, inner dimension height: 3,000 mm, filter area: 99 m², volume flow: 7 m³/h, Equipment: documentation/manual, lighting, Blasting house for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. Ijdpfou A A Tksx Am Eotf For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2025, Blast room 12x5m with blasting carriage and flat conveyor floor. Flat conveyor floor, screw trench, bucket elevator, magnetic separator, reprocessing unit, material bunker, blasting media refilling, free jet pressure blower, filter system with self-cleaning. Wall lining with 4mm fabric-reinforced rubber. For questions regarding technical specifications, please contact us in writing or by telephone. The machines have been produced at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG with their long-standing, well-known contacts. Itedpfx Aedhlikom Ejf

Condition: new, Year of construction: 2025, Dump belt blast wheel blast machine 11 kW direct drive indexing turbine with 8 throwing blades. Belt width 1000mm and Ø900mm Itedpohvikujfx Am Ejf

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 16,000 m³/h, power: 15 kW (20.39 HP), Mobile filtration unit 15 kW with 16,000 m³/h extraction capacity for aggressive dusts with pre-chamber separator. Assembly in approx. 10 minutes. Cartridge cleaning by compressed air pulse jet. 16 filter cartridges, 15.6 m², Bio Class M. Dust collection via big bag. The filter consists of 2 separate parts that are assembled using a forklift. Connection is made using 6 quick-release locks and 2 connector plugs. A duct or extraction hose can be connected at the rear of the filter. Itedswxlygepfx Am Ejf