Used Projetion Welding Machine for sale (66,138)

Condition: used, Technical details: current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA equipment: - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control Machine not tested, on sale as is! Fpjdpfx Aou Nwxbel Sen i.D. *

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Fedpfx Aloiknv Eo Sspn

Year of construction: 2012, condition: ready for operation (used), A Dalex welding press/projection welding machine including Sortimat (ATS) feeding unit is available. Rated power at 50% duty cycle: 100kVA, max. welding power: 455kVA, open-circuit voltage: 8.88V, max. short-circuit current: 67kA, cooling water flow rate: 10l/min, electrode force min./max.: 120daN/720daN, single-stroke cylinder: 100mm, machine throat depth: 250mm, stop range: 148mm-400mm, belt diameter: 260mm. Weight: approx. 850kg, control system: MPS 200 multi R1. Including sorting and feeding unit, flow monitor, adjustment device and return stroke monitoring. Documentation available. An on-site inspection is possible. Fedpfjxr Nwaox Al Sepn

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, year of last overhaul: 2011, Equipment: CE marking, documentation/manual, Friction welding machine from the manufacturer MTI, equipped for welding turbochargers. The machine is equipped with: Fpedpsv Uzf Eofx Al Sen - Siemens PLC, CPU 315, - Rexroth hydraulics - German user interface - CE marking Upon request, this machine can also be converted for many other welding tasks. We can also produce your friction welding joints, up to 300 tons of clamping force. Please contact us for further information!

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures by means of diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft-soldering machine, copper band welding machine), consisting of a main machine and control system, "PLC control, touchscreen operation". Process description: The workpiece carrier enters the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding chuck. The welding chuck moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process takes place. This process is repeated until the armature is completely welded. The welding chuck moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the conveyor system; I0 armatures are conveyed to the removal conveyor. Technical data: Manufacturer: Gatek Designation: Diffusion Welding Machine Fjdpfx Ajg Icfpel Sepn Energy data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse rating: 35 A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2004, EMA high-frequency welding machine with cooling water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Mains connection: 380V 106 A Foot pedal Water cooling, cooling water unit Thermotec PT2000 Dimensions approx. L1500 x W730 x H1900 mm Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of delivery. You can find more new and used items in our shop! International shipping costs available upon request! Fedpfx Aod Tv H Dsl Sopn

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, Fpodpjxlr Tdsfx Al Son air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. Fpjdpjza T A Refx Al Son You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding System, 8 kVA Fsdjl Smn Sjpfx Al Sepn Universal welding station, 8 kVA, manually operated welding gun, dual program. Simultaneous connection of two tools with automatic selection of the corresponding welding program, which saves time and avoids errors, ensuring a simple and safe workflow. Body repairs: Resistance spot welding of sheet metal, smoothing with a dent puller (pins and washers), localized heating (carbon electrode), screw and rivet welding, dent removal from stainless steel sheet metal. Synchronous SCR welding control, adjustment of welding time in cycles and pulses, adjustment of welding current and compensation function. Mains connection: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50% duty cycle: 8 kVA Max. welding power: 35 kVA Max. secondary current: 6.4 kA Heat current 100%: 0.88 kA Year of manufacture: 2014 Weight: 85 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine SURE3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: The SURE handheld laser welding system with 3,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and flexible to use. Highlights and Features: Power: 3,000 watts for the highest welding quality and speed Laser wavelength: 1080 nm, continuous operation with a modulation frequency of up to 20 kHz Handheld laser welding head – optimally positioned for comfortable operation Robust housing, intelligent internal structure for maximum service life Touchscreen display for easy operation Automatic multi-function wire feed possible Safety features: Three-color alarm, safety interlocks, protection mechanism against incorrect operation Cooling via a separate water circuit with a 13-liter tank volume CE-certified components according to European standards. Your Advantages Work safely thanks to extensive protection mechanisms and alarm systems Flexible application possibilities, including automatic wire feed and robot integration Low operating costs and easy maintenance thanks to well-designed technology and durable components. Fpjdpfxoy R I Tgs Al Sen

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 091600214, total width: 7,744 mm, total length: 8,408 mm, total height: 2,000 mm, feed length X-axis: 4,561 mm, feed length Y-axis: 6,856 mm, type of cooling: air, Seamless V-perfect technology welding machine, graphic representation of 19 axes, CNC controlled. No more need for edge finishing. 139,545 welded elements. Fjdezdr D Tjpfx Al Sspn External maximum welding dimensions: 4000x2800mm. Calibrated for Schüco CT70/Living 82; welding blocks not included.

Condition: good (used), Year of construction: 2023, functionality: fully functional, laser power: 1,200 W, Laser welding machine MaxPhotonics MA1-45, manufactured in 2023, with wire feeder, handheld laser gun with 5-meter cable, ground wire for safety with 5-meter cable, basic assortment of nozzles (for various applications), 1 Protect Starlight safety glasses, nitrogen pressure regulator, with wobble function, deflection 0-4mm, suitable for structural steel, aluminum, and stainless steel. Up to 4mm thickness. Interface for external safety components. The machine is fully functional. Fodsz D Dwcepfx Al Sopn

Condition: good (used), MERKLE Insquare W 300 AC/DC Welding Machine with original hose kit Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 Fsdpfx Aol Sm Hbjl Sjpn TIG DC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding processes: Selector switch, 10 levels: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular, TIG AC "Balanced TIG", Electrode Negative, Electrode Positive, Electrode "Sine wave", Electrode Rectangular Selector switch 1, 10 levels: Current 1, Time 1, Ramp-up and ramp-down time, Start current, End current, Ignition pulse, Spot time, Pre-flow and post-flow time Selector switch 2, 9 levels: Current 2, Time 2 (for pulse operation), AC Balance, AC Frequency, Hot start time and current, Current regulation, Electrode diameter, Display U Settings: 2 potentiometers for selector switches 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: Selector switch, 4 levels: OFF, Pulse slow, Pulse fast, Spot welding Ignition: Selector switch, 4 levels: OFF, High frequency, Lift-Tig Energy control: Selector switch, 4 levels: on the machine, Hand or foot control, Welding torch Operating mode: Selector switch, 4 levels: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations, freely assignable AC frequency: 50-200 Hz AC balance: 9-91% Gas pre-flow time: 0-3 s Gas post-flow time: 0-25 s Current ramp-up time: 0-2 s Current ramp-down time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Pulse slow: 10 ms-2.5 s Pulse fast: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200% Current regulation: 100-250% Button: Test protective device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Ramp-up, Current 1, Current 2, Ramp-down, End current Power source: IGBT inverter Ignition: High frequency or Lift-Tig Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin plug Torch cooling: Water-cooled Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with gas cylinder holder Gas cylinder holder: 10 - 20 - 50 l gas cylinder You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system Fjdpfjz Ilrvox Al Sepn -Manufacturer: Heinz Soyer, stud welding machine with stud welding gun -Type: BMS-8H -Connection voltage: 230 V / 50/60 Hz -Stud welding gun: PS-3K -Welding area: Bolts and pins from M3 – M8 or Ø 2 – 8 mm -Quantity: 1x stud welding machine available -Dimensions: 350/350/H270 mm -Weight: 15.4 kg

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Fpedpfjzpyfcjx Al Sen

Condition: good (used), Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system Fpjdpfx Asz N Hlujl Sjn -Manufacturer: Köcor, stud welding machine with stud welding gun -Type: 902 E -Power: 200 - 900 A -Stud welding gun: K 22 -Welding area: Bolts and pins from M3 – M12 -Quantity: 1x stud welding machine available -Dimensions: 590/300/H510 mm -Weight: 81 kg

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % Fjdpfx Aljzamffo Sspn 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Fpjdpezqucfofx Al Sjn Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. Fodpfox E Rd Dex Al Sepn The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Fpsdpfx Aoy Stahol Son Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Fpodpfx Asyimqwsl Son Low Offset: 0 N If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, machine/vehicle number: 199715, input voltage: 380 V, T-joint welding machine IDEAL. We only used it to weld a single product in small quantities. We don't know its history before that (almost 30 years ago), as we acquired the machine at a bankruptcy auction back then. Fpodpfxezzzgfj Al Sen

Condition: good (used), – Power output: 15 kVA – Pneumatic – 380V Fedezwkttopfx Al Sspn

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Fpsdpfxoz I Dgfo Al Sen Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Built in 1994, modernized by the machine manufacturer KUKA in 2012. The system features a facing unit, a flanging die, and a tube conveying unit for unloading the welded components. We can adapt this system to meet customer requirements. A complete retrofit is also possible. The machine is assembled and can be demonstrated. We can also manufacture your friction welding joints for you, up to a clamping force of 300 tons. Fpsdox I Efbepfx Al Sjn Feel free to contact us!