Used Raymond A Lamb E18.12 for sale (67,323)

Condition: used, This listing is for a Raymond A Lamb E18.12 Mini Hotplate Nsdexzgxmspfx Ah Sjdc

Condition: used, This listing is for a Raymond A Lamb E65 paraffin section floating out bath. The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides Black interior provides high contrast for viewing samples Temperature range: Ambient to 65°C Analogue control of temperature Heater and overheat lights 22cm Diameter of bowl Dims 33cm (D) x 28cm (W) x 14cm (H) Ndedpexzhtrsfx Ah Ssc Listing: Raymond A Lamb E65 Paraffin Section Floating Out Bath

Condition: used, This listing is for a Raymond A Lamb E22 Cassette Labeller The Cassette MicroWriter System is ideal for automating the referencing of processing cassettes with relevant specimen information – providing a secure method of cassette identification. Controllable via an RS232 serial interface, it is possible to link the unit to a wide range of computer equipment and Bar Code systems. This item was removed from a life science lab as surplus to requirements. Features Should the unit run out of cassettes during the sequence, an audible alarm will sound MicroWriter has a serial interface and is controllable from any device with a RS232 communications port. MicroWriter responds to a restricted set of 127 ASCII characters. Special characters are available upon request including foreign languages and customised symbols. Technical Specifications Hopper Capacity: 75 cassette x 6 Tape: 29mm Wide Njdpexzhg Ssfx Ah Sjdc

Condition: used, This listing is for a Raymond A Lamb E22 Slide Microwriter Ndsdoxzhgrjpfx Ah Ssc

Condition: used, This listing is for a Perkin Elmer Lambda 35 Spectrophotometer. The unit is in full working condition and is ready for immediate release. The PerkinElmer Lambda 35 UV/Vis Spectrophotometer offers the best solution for measurement on solids, pastes and powders. It supports Double-Beam Operation. Variable bandwidth is from 0.5 nm to 4 nm. LAMBDA systems are easy to operate and deliver results that you can trust,with minimal training for operators. Using LAMBDA system, it’s easy to develop simple, robust methods and make sure you follow them without making mistakes. And, no matter what LAMBDA system you choose, your daily UV/Vis analysis will be faster, simpler, and more reliable than ever. Wavelength range: 190-1100 nm Weight: 25 kg (57 lbs.) Wavelength absorbance range: 3 to 4 A Wavelength accuracy: ±0.1 nm Nodpfjxx Axwox Ah Ssdc Stray light:

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, number of axes: 5, overall weight: 6,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, I am offering a FANUM CNC milling machine that is ideal for precise machining tasks. This machine is robustly built and features an intuitive control system that makes operation easier. It is perfect for workshops that value accuracy and efficiency. - Brand: FANUM - Type: CNC milling machine - Color: Light grey with blue accents - Control: Integrated display with keypad and keyboard - Working area: Spacious work surface with T-slots Working area: 3000 x 2000 x 750 mm Suitable for wood and plastics Ndedpfxsy Aa Ute Ah Soc - Year of manufacture: 2015 - Location: Poland The machine is in good condition and fully functional, with normal signs of use that do not affect its performance. It has been regularly serviced and is ready for immediate use in your production. The machine can be viewed in operation by appointment. If you have any questions, feel free to contact me.

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Njdpfozvwiljx Ah Sedc Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: used, Year of construction: 2011, Edge banding machine Njdpfx Ahsz Atm Te Sjdc Manufacturer: Homag Type: KAL Ambition 210 Year of manufacture: 2011 Technical data Edge trimming Gluing section Pressure zone SK11 milling unit Profile trimming blade Surface trimming blade Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 008564, X axis working area: 2465 mm Y axis working area: 1260 mm Ndsdozvwh Iepfx Ah Sec Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2019, Fan Systems WITT A-RNZ9/560/710/2 Centrifugal fan Nedpfxsz E Nqqo Ah Sodc 2019, unused, mounted on frame with 45KW motor, see plates for full spec

Condition: used, empty load weight: 9,270 kg, maximum load weight: 32,730 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2023, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, loading space volume: 87 m³, suspension: air, color: other, Year of construction: 2023, gearing type: mechanical, Equipment: tail-lift, Unladen weight: 9,270 kg, gross vehicle weight: 42,000 kg, loading space (L W H): 13,400 mm x 2,500 mm x 2,600 mm, loading volume: 87 m³, air suspension, underrun protection, lift axle, hydraulic tail lift, 1x15 pin connector, LAMBERET SR2L REFRIGERATED/FREEZER SEMITRAILER / CARRIER VECTOR HE 19 MT MULTITEMP / -30 +30 / DHOLLANDIA 2,000 kg tail lift – 13.40x2.50x2.60 m / flower width / total 4,379 operating hours. Ndsdpozx I Iqjfx Ah Ssc

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,450 mm, table load: 6,486 kg, spindle diameter: 110 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Kuraki Heavy Duty CNC Horizontal Borer Ndedpfjz S Nl Njx Ah Ssc Model: KBT 11 WDX - A Control: Fanuc Series 15M Year: 1996 Table Area: 1400 x 1600mm Table Indexing: 0.001 Degrees (B Axis Rotary) Table Load 6486 KGS X Axis Travel: 2000mm Y Axis Travel: 1500mm Z Axis Travel: 1450mm W Axis Travel: 500mm (Spindle) Spindle Diameter: 110mm Spindle Taper: BT50 Spindle Speeds: 5-3000 RPM (Variable) 40 Station Tool Changer Swarf Conveyor Motor: 18-22 KW

Condition: used, TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply, DC, 1 channel, 2U, 10V/240A, 2,400W, RS232, RS485 in a 19-inch housing Technical data: Manufacturer: TDK-LAMBDA Power supply type: Programmable laboratory power supply Display type: LED x2 Number of channels: 1 Output voltage: 0...10V DC Output current: 0...240A Max. power: 2.4 kW Mounting: 19" rack Output voltage resolution: 1.2 mV Output current resolution: 28.8 mA Ndsdpfx Ahozg Exvs Sjc Ripple and noise (regulated): ≤8 Vrms, ≤60 Vpp Input connector type: Terminal block Manufacturer series: GEN Operating temperature: 0...50°C Dimensions (width x height x depth): 423x43.6x432.8 mm Parameter display: 4 digits Software: LabVIEW Documents & Downloads Data sheet: Operating manual Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, mileage: 668,000 km, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, fuel: diesel, brakes: VEB, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total height: 2,460 mm, loading space length: 8,500 mm, loading space width: 2,460 mm, Year of construction: 2018, Equipment: air conditioning, cruise control, power assisted steering, D WIDE 18.290 EURO 6 AIR SUSPENSION OPTIDRIVER 12-SPEED GEARBOX AIR CONDITIONER FRC LAMBERET REFRIGERATED BOX Nsdpfj Aa A A Njx Ah Ssdc 8500MM DHOLANDIA 2000KG LIFTGATE CARRIER 1200 REFRIGERATION UNIT

Condition: used, mileage: 323,000 km, first registration: 07/2015, Fuso 7C18 refrigerated vehicle with Carrier Supra 750 refrigeration unit, Lamberet box body, and LBW tail lift. • EURO 6 emission standard • Cruise control • Leaf/leaf suspension • Automatic transmission • ABS • ASR / switchable • Airbag • Air conditioning • Central locking • Double bench seat for passenger (3-seater) • Electric windows • Fog lights • Headlight range adjustment • Reversing camera • Tire size: 205/75 R17.5 • 7,490 kg gross vehicle weight (GVW) • Unladen weight: 5,200 kg • Payload: 2,300 kg! LAMBERET refrigerated box body: • 12 pallet spaces • Soft wall, 3-part; longitudinally adjustable • Cold curtain • Portal doors at the rear • Side door on the right • Aluminum impact strips on the right and left at the bottom • Tie-down rails, double on the right and left • Floor: Aluminum tread plate • Box body interior dimensions: 5,200 x 2,470 x 2,450 mm • Dhollandia DLHM 10 tail lift, vertical CARRIER Supra 750 refrigeration unit: • Diesel / Electric (380 V) • Remote control in the cab • Temperature recorder • !! Engine has been completely overhauled in our master workshop, 0 km! • !! Clutch new! Ndedpowmn Sujfx Ah Ssc - German vehicle - 1st owner! - TÜV / MOT inspection on request and for an extra charge: new! Errors and prior sale excepted! = Further information = Year of construction: 2015

Condition: used, mileage: 231,435 km, power: 257 kW (349.42 HP), first registration: 02/2005, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, color: green, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel-air, loading space volume: 15 m³, Equipment: electric window regulation, Technical information Number of cylinders: 6 Engine capacity: 10.520 cc Drivetrain Drive: Wheel Ndodpfx Ahez I Rv Ts Ssc Engine type: MAN D2066 LF Transmission Transmission: 12AS, 12 gears, Automatic Axle configuration Tyre size: 315/80R22,5 Front axle: Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Steering; Suspension: air suspension Weights Empty weight: 11.920 kg Carrying capacity: 14.080 kg GVW: 26.000 kg Functional Make of bodywork: LAMBRECHT Number of compartments: 5 = Additional options and accessories = - PTO

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Nede Ad Iw Hjpfx Ah Sodc Type: Rover A 1643 Year of manufacture: 2016 Technical data - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm - Horizontal spindle stroke: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2022, condition: ready for operation (used), Compressed air station manufactured in 2018. This Ingersoll Rand D480EC-A is part of a complete turnkey industrial system, featuring a primary rotary screw compressor, air treatment dryers, and buffer tanks. It includes a 2,000-litre pressure vessel and multiple refrigeration air dryers. If you are looking to get high-quality compressed air capabilities, consider the Ingersoll Rand D480EC-A machine we have for sale. Contact us for further details. INGERSOLL RAND RS30i-A9.6-TAS- Machine Type: Oil-Flooded Rotary Screw Air Compressor (Total Air System / TAS Configuration)- Nominal Power / Input Shaft Power: 30 kW (40 HP)- Maximum Allowable Working Pressure: 9.6 bar (138 psi)- Flow Rate / Air Capacity (FAD): ~4.7 - 5.2 m³/min (164 - 184 CFM)- Motor Speed: 2970 rpm- Electrical Supply: 400 V / 3 Phase / 50 Hz- Gross Mass / Package Weight: 1150 kg- Sound Level: 69 dB(A)- Integrated Features: Xe-70M Microprocessor Controller, Integrated Refrigerated Air Dryer, Moisture Separator, Dual-Stage Coalescing Air Filters, Heavy-Duty Pre-Filters, High-Efficiency TEFC IP55 Main Motor- Piping Connections: 1.5" NPT DischargeINGERSOLL RAND RSE37n-A13- Machine Type: Rotary Screw Air Compressor- Installed Motor Capacity: 37 kW- Stage Pressure: 13 bar- Debit Volume / Air Flow Capacity: 6,90 m³/min- Suction Pressure: 1,0 bar- Full Load Current: 81 A- Motor Speed: 3600 rpm- Air End Model: EK140NK- Version: V4- Voltage / Phase / Frequency: 400V / 3 Ph / 50 Hz- Compression Medium: Luft- Total Weight: 952 kgINGERSOLL RAND D600EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,70 kg)- CO2 Equivalent: 3,016 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D480EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,20 Kg)- CO2 Equivalent: 2,129 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D240EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 0,84 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (0,40 Kg)- CO2 Equivalent: 0,710 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)STIA DRUCKBEHÄLTER 2000L- Machine Type: Vertical Compressed Air Storage Vessel / Receiver Tank- Volume: 2000 Litres- Maximum Allowable Pressure (PS): 10 bar- Test Pressure (PT): 14.3 bar- Minimum / Maximum Allowable Temperature (TS): 0 / 50 °CW+Z ROHRSYSTEM-TECHNIK DTS-40-HPI- Machine Type: High-Temperature Pressure Vessel / Buffer Tank- Maximum Allowable Pressure (PS): 16 bar- Minimum Allowable Pressure (PS): 0 bar- Minimum Allowable Temperature (TS): -10 °C- Maximum Allowable Temperature (TS): 250 °C- Volume (V): 71 L- Test Pressure (PT): 28. Njde Adrpaopfx Ah Ssdc

Condition: used, mileage: 651,785 km, power: 250 kW (339.91 HP), first registration: 05/1999, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 3,900 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro2, suspension: steel-air, Equipment: electric window regulation, Front axle: Tyre size: 385/65R22,5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80R22,5; Double wheels; Suspension: air suspension Rear axle 2: Tyre size: 315/80R22,5; Suspension: air suspension Njdpfxszx Utye Ah Sjdc Drive: Wheel GVW: 26.000 kg Make of bodywork: LAMBRECHT Number of compartments: 5 = Additional options and accessories = - PTO

Condition: used, mileage: 498,663 km, power: 240 kW (326.31 HP), first registration: 07/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, loading space volume: 41 m³, loading space length: 7,400 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Renault D Wide 4x2 | Refrigerated box body | Thermo King | LBW | Side door VIN: JB005399 CHASSIS / COMPONENTS * 4x2 * Leaf/air suspension * Wheelbase: 5,250 mm * Plastic fuel tank * AdBlue tank * Ball-type trailer coupling 50 mm * Duomatic couplings * Electrical connection 2 x 7-pin * Aluminum side underrun protection * Spare wheel * Rear underrun protection BODY * Lamberet refrigerated box body, year of manufacture 05/2018 * Thermo King refrigeration unit * Bär Cargolift BC 1500 S4-B4 tail lift * Tail lift load capacity: 1,500 kg * Side service door on the front left * Cargo area dimensions: * Length: 7.40 m * Width: 2.48 m * Height: 2.25 m ENGINE / GEARBOX * 240 kW (326 hp) * 7,698 cm³ displacement * Euro VI C * Automatic transmission * Engine brake * Differential lock CAB / DRIVER'S CAB * D Wide driver's cab * 1 bed * Air conditioning * Radio * Navigation * Hands-free system * USB port * Bluetooth * Cruise control * Spoiler * Full spoiler WEIGHTS * Permissible total weight: 18,000 kg * Unladen weight: 9,745 kg * Payload: 8,255 kg TIRES * Axle: 315/70 R22.5, remaining tread: 20% / 20% * Axle: 315/70 R22.5, remaining tread: 60% / 60% OTHER * German vehicle * MOT: 07/2026 * Inspection due New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, changes, prior sale and errors are reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and seriousness. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Nodpfxszhdb Eo Ah Ssdc Convince yourself! Our service for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day passes / export license plates We will gladly help you obtain export license plates/short-term license plates. Handling of customs formalities We will gladly help you with the handling of customs matters.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SPINNER H500-A HORIZONTAL CNC MACHINING CENTER SPINNER H500-A (YEAR OF MANUFACTURE 2012) Nodpfoz Ri Rvex Ah Sedc Travel ranges: X = 700 mm, Y = 650 mm, Z = 650 mm Horizontal milling and drilling Multi-sided machining in conjunction with a rotary table as the 4th axis Dual-pallet changer, 2 x 500 x 500 mm 60-tool changer, automatic workpiece measuring probe Glass scales in all axes, laser tool measurement SK 40 with 12,000 rpm and 40 bar through-spindle coolant

Year of construction: 2017, condition: used, Working width: 2500mm, an on-site inspection is possible, not under power. Nedezy Rvyopfx Ah Ssdc

Condition: used, Year of construction: 2022, Biesse Akron 1330 A Edgebander Single-sided edgebanders AKRON 1300 A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 NC AXIS PACKAGE - GROUP OF DEVICES THAT ENABLE THE AUTOMATION OF MACHINE SET-UP It includes: - AX-1: NC axis on the infeed fence. - AX-1: NC axis on edge pressing rollers. - AX-4, NC axes on Fine trimming Unit. - AX-2, NC axes on Corner rounding Unit. - AX-4, NC axes on Edge scraper ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=3+3 45°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM NC GLUE FLOW CONTROL FOR EVA/PU HYBRID GLUING HEAD QM-703 PREMELTER FOR EVA GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 PRO-NESTING KIT FOR FINE TRIMMING UNIT C2004010 Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood ROUNDING FUNCTION ONLY Njdpjz Iz Tiefx Ah Sodc SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper KIT FOR DELICATE PANELS FOR GLUE SCRAPER UNIT- Independent pneumatic exclusion of the top/bottom units. - Glue scraper knives pressure adjustment. CLEANING UNIT LPT02 SOPHIA - IoT Connection SPECIAL EXECUTION KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 1982, machine/vehicle number: 82/MA/7, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, Equipment: documentation/manual, Year of manufacture 1986 Fully functional Cutting height (max.) 180 mm Cutting width (max.) 350 mm Nodpfxszhh Uve Ah Sodc Saw blade diameter 350 mm Saw blade bore 80 mm Disc diameter 350 mm Description A.COSTA LEOPARD / S Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Max. disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-ejection latches Weight: ± 6.000 kg Spare sleeves, spacers, saw blades Total length: 400 cm Number of rollers: 2 straight, 14 angled. TOTAL: 16 lower rollers + 2 upper rollers Pneumatic clamping of upper rollers

Year of construction: 2017, condition: used, Roll lifter (roll manipulator) for lifting and rotating rolls. Nodjzzkcvepfx Ah Ssdc Rotates rolls from a vertical to a horizontal position for easy assembly and allows for lateral movement, enabling effortless pallet handling. Lifting capacity: 100 kg Lifting height: approx. 155 cm