Used Revolving Wall for sale (6,179)

Year of construction: 2017, condition: ready for operation (used), A rotating wall for the glass industry is available. Weight: approx. 1300kg. Fgsdpfx Aotvgraoggjg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Fsdpjzhnlzsfx Aggsgg Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 50,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Fgodszhn Rqepfx Aggeg Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 35,000 l, usable tank capacity: 35,000 l, total length: 4,865 mm, inner diameter: 3,000 mm, outer diameter: 3,016 mm, overall weight: 4,670 kg, wall material: stainless steel, wall thickness: 8 mm, manhole location: top, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this large-capacity 316L stainless steel horizontal storage vessel is suitable for bulk hygienic chemical and process liquid storage. Designed for vacuum and low-pressure service. Constructed entirely in 316L stainless steel throughout with 8mm shell and 6mm dish walls, heavy duty stainless steel cradle supports, and ANSI/tri-clamp process connections throughout. Suitable for bulk hygienic storage, excellent condition. Fsdpjzht Rijfx Aggogg Material: 316L Stainless Steel throughout. Working Volume: 35,000 Litres. Shell ID: 3,000mm. Overall Length: 4,865mm. Shell Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 4,250–4,670kg depending on configuration. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Factory Tested: 2021. Three units currently available: two insulated and one non-insulated. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Fgodpozht Smjfx Aggeg Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 15,000 l, usable tank capacity: 15,000 l, total height: 3,875 mm, outer diameter: 1,750 mm, overall weight: 2,900 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 15,000 Litres. Shell ID: 2,930mm. Overall Height: 3,875mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 2,900kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19635-3. Factory Tested: September 2020. Nozzles and fittings include 610mm hinged manway, CIP inlets with dip pipe and TOD clip-on spray fittings, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, flush polished level switch, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. . Please contact us for further information or to discuss delivery and installation options. Fedpfxezhn Ngs Aggegg

Condition: new, turning length 2000 mm centre height 330 mm swing diameter over bed slide 660 mm turning dia. in gap 900 mm swing diameter over slide rest 460 mm spindle bore 105 mm turning speeds 25 - 1600 U/min bed width 400 mm spindle taper 55029 D 1-8 taper in tailstock 5 MK quill travel 235 mm total power requirement 7,5 kW weight of the machine ca. 2900 kg. range L-W-H 3630 x 1200 x 1520 mm Scope of delivery : - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinally and flatly Fedpfx Agoxabpqogsgg - LED machine light - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed bezel - Passage diam. max. 180 mm - Revolving bezel - Passage diam. max. 120mm - 2 centering points - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Initial filling with Shell Tellus 46 - Coolant device - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Interchangeable wheels - reducing sleeve - Chip back wall - Cable routing via energy chain - Operating tool

Condition: used, Comprehensively tested, used Olsa Process Mixing Suite. This mixing suite comprises of: 2 off Olsa Pharmaceutical grade mirror polished 316 stainless steel vacuum mixer homogenising vessels.  Full hydraulic raise/lower with electrical panels, touchscreen PLC controls, CIP pumps, diaphragm product discharge pumps, both vessels on load cell system. Manuals/drawings included. Technical specification below for each main process vessel.   Vessel 1 Gross capacity 266L, full scraped wall 2.2kw anchor mixer, contra rotating mixer 1.1kw, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.   Vessel 2 Fedpfx Agsymaz Hogjgg Gross capacity 266L, full scraped wall 2.2kw anchor mixer, bottom entry high speed homogeniser 7.5kw.  Vessel rating 2.5bar plus full vacuum at 155 Degrees C.  Jacket 4.5bar 155 degrees C. CIP system.  150mm dia hinged chargeport with sight glass, vessel light.  Numerous top dish connections, vacuum pressure gauge, 30mm dia outlet.  Vessel dimensions 1.3m x 2m x 2.4m closed.

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Fgedpfx Aexv Arxeggsg Station nr10: Working station - Upraiser table

Condition: good (used), Year of construction: 2021, KELLER – Production line for prefabricated wall panels Fully automated production line for manufacturing prefabricated wall panels made of lightweight concrete blocks. Year of manufacture: 2021 Fgodpfeziwplox Aggsg The line consists of: Unpacking and block feeder Layer formation with lateral pushers Mortar mixer and application system Storage and buffer zone for finished wall panels Final inspection and palletizing of the prefabricated components Block dimensions: 15 - 36.5 cm Output: approx. 400 - 480 m² / 8 hours Wall length: max. 6.5 m / min. 1.5 m Wall height: max. 3.5 m / min. 4 blocks The line is available immediately. Location: Germany.

Condition: used, This listing is for the Radiant Innovation ZG10U Wall Mount co2 Monitor with receiver The unit is in full working condition and is ready for immediate use The ZG10U Wall Mount CO₂ Monitor by ZyAura is a professional indoor air quality monitoring device engineered for environments where accurate CO₂ measurement and ventilation control are essential. It utilizes advanced sensing technology and supports automated safety alerts for confined spaces. Key Features & Specifications CO₂ Measurement Range: 0–50,000 ppm (parts per million) Sensing Technology: Dual Beam NDIR (Non-Dispersive Infrared) – ensures precise and stable long-term CO₂ detection Accuracy: ±100 ppm or ±5% of reading (whichever is greater) Temperature Monitoring: 0°C to 50°C (32°F to 122°F) Display: Large digital LCD that clearly shows ambient CO₂ concentration and temperature Alarm System: Audible and visual alerts with configurable alarm thresholds (AL1 and AL2) Relay Output: Controls external devices (e.g., fans or CO₂ generators) Output: 30 VDC or 250 VAC, max 2A, SPST, Normally Open Automatic Ventilation Control: Relay output can trigger ventilation (e.g., fan) in confined spaces based on CO₂ levels IP Rating: IP54 Splash Proof Protection for the Sensor Unit (SEU), excluding the backside when mounted on a wall SEU + RDU Modular System Fgedoxv A Dbspfx Aggeg SEU (Sensor Unit) connects with up to 3 RDUs (Remote Display Units) via 7-meter communication cables Ideal for safety notices in multiple locations or rooms Remote units mirror real-time CO₂ and temperature data from the SEU Common Applications Offices and meeting rooms Classrooms and educational facilities Laboratories and research centers Industrial warehouses and storage units HVAC system integration for smart ventilation Installation Wall-mounted design (recommended ~0.45 m from the floor) AC adapter power supply (110/220 VAC) Easy relay connection to ventilation or safety systems Radiant Innovation ZG10U Wall Mount co2 Monitor with reciever

Condition: used, mileage: 71,996 km, power: 110 kW (149.56 HP), first registration: 03/2021, fuel type: diesel, overall weight: 3,200 kg, wheelbase: 3,400 mm, next inspection (TÜV): 05/2027, color: white, emission class: euro6, number of seats: 2, loading space volume: 4.5 m³, loading space length: 2,330 mm, loading space width: 1,370 mm, loading space height: 1,410 mm, construction height: 1,990 mm, working width: 1,904 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, sliding door, soot filter, traction control, trailer coupling, Air conditioning system Climatic, trailer coupling, central locking with remote control and interior operation, exterior mirrors electrically adjustable and heated, electric windows, multifunction display Plus, hill start assist, fatigue detection sensor, speed control system (cruise control) incl. speed limiter, reversing camera, partition wall, winter tires, daytime running lights, fog lights with integrated cornering lights, digital radio reception (DAB+), audio navigation system Discover Media Streaming & Internet (touchscreen - USB), touchscreen, Bluetooth hands-free system, MP3 interface, multimedia interface 2 x USB (Type C) at the front, voice control system, Mobile Online Services App-Connect Wired and Wireless, emergency call system, tire pressure monitoring display, long wheelbase, auxiliary heater (hot water) with parking heater function and remote control, heat-insulating glass, driver comfort seat - heated with armrest and lumbar support, tachometer, driver airbag, front passenger airbag can be deactivated, electronic stability program (ESP) with brake assist - ASR/ABS - EDS and hill start assist, deactivation switch for traction control (ASR), comfort seats, center armrest, start/stop system, diesel particulate filter, sliding door load/passenger compartment on the right, electronic immobilizer, equipment package: Comfort Package Plus, exterior temperature display, power steering, paint: Candy White, shelving system with vise, wooden load floor with interior paneling, 2nd battery, converter 230 V, roof rack system with ladder roller and revolving beacons (can be removed), rear hinged doors with glazing, darkened rear windows, rear window - heated with wiper system, permissible gross weight 3.2 tons, truck registration, trailer stabilization program, electrical interface for external use (CAN data bus) with connection terminal, grab handles A-pillars, interior lights in the driver's cab: reading light at the front, illuminated glove compartment, sockets (12V connection) in the driver's cab (2 pieces), waste container, "Transporter" lettering on the fender, non-smoking package, radiator grille with chrome strips, exterior mirror convex - left, exterior mirror convex - right, airbag driver/passenger side, floor covering in the driver's cab: rubber, lockable glove compartment, interior filter: pollen filter, folding radio remote control (2), child safety lock electrically operated, warning system for seat belt (driver's side), interior lights in the load/passenger compartment: LED, lashing eyes in the load compartment, anti-lock braking system (ABS), brake assist (HBA), multi-collision brake, steering column (steering wheel) adjustable, traction control (ASR), crosswind assist, body/structure: standard van, wheelbase 3400 mm, drive type: all-wheel drive, gearbox 6-speed, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Changes, errors and prior sale reserved. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle possible. Retrofitting of: - trailer couplings, also up to 3500 kg possible - parking heaters - screen for reversing camera and/or navigation via mobile phone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control Fgjdpfjzvu Sdjx Aggeg

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Fgodpozdfb Hsfx Aggsg Capacity: 4,000 L Type of stainless: Stainless Steel Internal Pressure: 6 bar Internal Temperature: 130°C Jacket Pressure: 9 bar Diameter: 1,800 mm Straight Side: 2,450 mm Type Of Heads: Welded Dished Top and Bottom Legs/Lugs: 4 Lugs

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Fedpfxoyfu N As Aggsgg Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: new, maximum load weight: 35,450 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,740 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low-bed trailer with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions* External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Overall width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights Unladen weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg Fgjdeyrkpxjpfx Aggeg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity per axle: 8,000 kg * Fifth wheel load capacity: 15,000 kg ----Chassis / Axles 3 BPW axles * Air suspension * 2 fixed front axles * 1 trailing rear axle * Lift axle on 1st axle (load-dependent) * Automatic axle lift control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting according to ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tyres Tyre size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tyres * 3PMSF winter tyres * Tyre pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure High-strength S700 MC steel chassis * 2" kingpin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Area / Extensions Side extension up to 300 mm * 100x100 box section sockets * Galvanized steel extensions * Hardwood boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough Wheel well for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp surface made of hardwood * Ramp safety with tension chain ----Load Securing Lashing points: Gooseneck: * 2 × 2 pcs 5 t * 1 × 2 pcs 10 t * Platform outside: * 3 × 2 pcs 5 t * 4 × 2 pcs 10 t * Under outer frame: * 2 × 2 pcs 8 t * Platform: * 4 × 2 pcs 6 t (see purchase contract 20186783) Additional securing: * 5 × 2 stake pockets * 3 × 2 multiple stake pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories Toolbox (700 × 400 × 360 mm) * Revolving warning lamp * Rear work lamp * Extendable warning signs with LED * Side marking tape * Rear marking tape * Wheel chocks * Wabco Smartboard * Connection cable (NATO socket) For further information, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0297, 1 Demag KBK II wall-mounted slewing crane, 250 kg load capacity / lifting capacity Outreach 5m, 250 kg load capacity with Demag DC chain hoist, 250 kg load capacity Weight incl. wall bracket approx. 300 kg Complete with chain hoist, cable track, trolley and small parts Slewing range 270° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Shipping via freight forwarder or pickup Please inquire about shipping costs, specifying the postal code. Fedpfx Agszv H T Togogg

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Technical data: see photos Fjdpfx Asxvivqsggsgg Location: ex-site Saarland

Condition: new, maximum load weight: 14,910 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 6,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis frame: * Welded construction made of high-quality steel with cross members and an outer frame. Ramp storage: * Ramp storage between the longitudinal beams. Under-run protection: * Rigid under-run protection in accordance with ECE R58-03 * Side and under-run protection in accordance with EC regulations. Front support: * Front support with two-stage crank supports (2 x 12 t). Rear support: * Rear support with lockable drop supports. Axles: * 2 x 10t SAF axles with drum brakes, low-maintenance air suspension axle, lifting and lowering device with a total lifting stroke of approx. 180 mm, asbestos-free brake pads. Axle with a load capacity of 10,000 kg. * Compressed air tank, steel * Wheel fastening by center centering Tires: * Tires 235/75 R 17.5, on steel disc wheels, 8-ply, manufacturer of our choice * Tire pressure monitoring system, which indicates low tire pressure. Splash guard: * Plastic mudguards, splash flaps Load securing: * 6 pairs of lashing recesses designed for 8 t, evenly distributed on the outer frame * Beveled and perforated outer frame for attaching lashing hooks when the side boards are closed * Stake pockets: 3 pairs of welded stake pockets, internal dimension for stakes approx. 80 x 50 mm, evenly distributed. Braking system: * Automatic, load-dependent, two-circuit pneumatic braking system in accordance with EC regulations with spring-loaded parking brake (incl. 1 release valve), EBS connections for air (red/yellow), corrugated flexible lines for trailer. Floor: * Hardwood floor approx. 30 mm, with Z-profile boards. Front wall: * Designed as a removable side board, approx. 600 mm high. Lighting/electrical system: * Electrical system: 24-volt lighting system in accordance with StVZO * Multi-chamber rear lights, completely LED, with integrated ballast and flashing side marker lights. * On the trailer, additional position lights. * Position lights at the front, white (required for approval in EU countries and Switzerland). Electrical system: * Trailer connections: 2x7-pole * Trailer connection: 1x15-pole * Mounting plate for supply lines on the front cross member, lines permanently mounted, without separate connections, supply connections on the left. Accessories: * Wheel chocks in accordance with StVZO. * Plug-in revolving warning light at the rear. * Delivery of an additional 40 mm towing hitch (GVWR max. 13,500 kg). Fgsdjzgqncjpfx Aggog Painting: * Coating of undercarriage: galvanized + powder-coated * Chassis frame with high-quality hot-dip galvanizing and subsequent powder coating for optimum corrosion protection; the surface may show the ripple structure of the hot-dip galvanizing. * Coating of body parts: standard Color: * RAL 3002 carmine red * Center and corner profiles: KTL + powder coating: RAL 3002 carmine red * Side boards: RAL 3002 carmine red * Drawbar: hot-dip galvanized * We would like to point out that, due to the size of the chassis and the selected coating process (hot-dip galvanizing), surface imperfections may occur. These include, for example, zinc pimples, run-ons, zinc whiskers, distortion, etc. We have no influence on this, and it will not constitute a legal defect with regard to the appearance at a later date. Contour marking: * Yellow lateral reflective contour marking. * Yellow ref

Condition: used, mileage: 306,127 km, first registration: 10/2013, axle configuration: 4x4, total length: 10,600 mm, total width: 2,520 mm, total height: 300 mm, Year of construction: 2013, Equipment: ABS, EBS, air conditioning, crane, cruise control, electronic stability program (ESP), power assisted steering, traction control, - Stability control = Additional options and accessories = - Differential lock = Notes = DB ACTROS 4146 AK MP3 8X8 Crane Truck with Fassi 660 Loader Crane / Winch and Slewing Servo !! SINGLE TIRES !! • ALL-WHEEL drive! • Full leaf spring suspension! • EURO 5 • Telligent 16-speed transmission with clutch pedal • Air conditioning • Enhanced engine brake • Cruise control • Auxiliary heater • Hill start assist • 2 x differential locks • ABS deactivatable • Signal horn • Light bar with LED work lights • Rotating beacons • Multifunction steering wheel • Radio-CD player Fodpfxswmn Tle Aggjgg • Telephone • Tires: 395/85 R20 • Good tire tread! • Unladen weight: 22,544 kg • Perm. GVW: 32,000 kg (36,000 kg technically possible!) • Trailer hitch – jaw coupling • Perm. trailer load: 12,500 kg • 2-line trailer brake system • Overall vehicle length: 10,600 mm Superstructure: FASSI 660 XD Type F600A / 660 AXP 24 • Remote control • 4 hydraulic extensions • Hydraulic ROTATOR • Hydraulic WINCH • 4-point outriggers • 10-ton lifting beam • Flatbed body MÜLLER with side walls Special equipment: 2-line trailer brake, trailer coupling: G 150, 24V / 15-pin trailer socket, brushed steel dashboard, Audio system: CD radio (Bluetooth incl. permanently installed phone), 220 Ah battery, air horn(s) on cab roof, Cab: reinforced cab suspension strut, Cab: movable cab entry, Cab: comfort suspension (1.8 Hz), construction vehicle filter, 100 A alternator, 400 l fuel tank, reinforced clutch, reinforced cooling, PTO MB 10C, programmable special module, revolving beacon left/right, heat insulated side windows, circuit breaker, Cab seats: comfort driver's seat, air-sprung incl. horizontal suspension, sun visor, sun blind side windows, driver and passenger door, power inverter 24V / 12V 15 A, reinforced rear axle stabilizer, 12 V socket, front bumper in steel, crossbeam for trailer coupling, additional thermal insulation, auxiliary water heater, transmission oil cooler Further equipment: 2nd steered front axle, EURO 5 emission standard, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing coupling, vertical exhaust muffler behind cab, electric & heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: S (short), suspension: leaf/leaf, electric windows, 16-speed transmission, rear axle H 7, 13 t, crown gear 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, model revision from 06/2008, engine 12.0 l - 335 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, Telligent transmission, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio prep, phone/fax prep, immobilizer, heat insulating glazing, central locking Cab: single

Condition: used, mileage: 200 km, power: 382 kW (519.37 HP), first registration: 04/2026, fuel type: diesel, axle configuration: 3 axles, wheelbase: 3,600 mm, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: air conditioning, all wheel drive, central locking, compressed air brake, crane, MAN TGS 33.520 6x6 BL CH Wheelbase: 3,600mm Engine power: 382 kW / 520 hp EURO 6 MAN TipMatic with retarder Permissible gross combination weight: 60,000 kg Gross vehicle weight: 28,000 kg Front axle load: 9,000 kg Rear axle load 1: 13,000 kg Rear axle load 2: 13,000 kg Type: High-body Vehicle type: Tipper with loading crane Retarder Eco Reversing warning system Comfort cab suspension Sun visor 4 keys LED revolving beacons LED daytime running lights Side-mounted LED indicators LED high-beam assistant Yellow LED revolving warning beacons with function monitoring White LED work lights Premium driver's seat, air-suspended, with lumbar support and shoulder adjustment, seat heating / armrests on driver’s seat MAN Media System Advanced 7-inch MAN sound system Meiller Trigenius D316, 4,600 x 2,420 mm for loading crane Floor of tipper body made of HBW 450 steel, 5mm Cargo securing with floor and sidewall lashing rings Left side wall of tipper body with Bordmatik Right side wall of tipper body pendulum-mounted Rear wall of tipper body pendulum-mounted, 800 mm side and rear wall height Additional tipper hydraulic operation: Bordmatik EBS, ABS, ESP, ASR, EBA, LDW AttentionGuard Emergency brake assistant, Front Detection, Traffic sign recognition, Distance warning system Fuel tank 300L + 35L AdBlue Drum brakes Tire pressure monitoring system with temperature monitoring Special approval for heavy-duty/municipal operation Prepared for winter service Suspension: leaf/air Cab NN with rear wall window, pop-up roof, seat heating, steel bumper, central locking with remote control, Climatronic climate control 2 air horns HIAB loader crane type HiPro 352 E-7 Crane dimensions approx. 22,380mm x 2,506mm Hydraulic outreach approx. 4.4-16.2m Remote control XSDrive joystick 222 Sale exclusively to commercial customers, excluding any warranty. Errors and prior sale excepted. Fgedpfjxx Rx Sjx Aggjg

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Fgjdpfjzd Uv Ejx Aggsg Sliding guard for operator protection CE safety equipment

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Fgodpfxexq Rrco Aggsg

Condition: used, mileage: 200 km, power: 382 kW (519.37 HP), first registration: 04/2026, fuel type: diesel, axle configuration: 3 axles, wheelbase: 3,600 mm, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: air conditioning, all wheel drive, central locking, compressed air brake, crane, MAN TGS 33.520 6x6 BL CH Wheelbase: 3,600mm Engine power: 382 kW / 520 hp EURO 6 MAN TipMatic with retarder Permissible gross combination weight: 60,000 kg Gross vehicle weight: 28,000 kg Front axle load: 9,000 kg Rear axle load 1: 13,000 kg Rear axle load 2: 13,000 kg Type: High-body Vehicle type: Tipper with loading crane Retarder Eco Reversing warning system Comfort cab suspension Sun visor 4 keys LED revolving beacons LED daytime running lights Side-mounted LED indicators LED high-beam assistant Yellow LED revolving warning beacons with function monitoring White LED work lights Premium driver's seat, air-suspended, with lumbar support and shoulder adjustment, seat heating / armrests on driver’s seat MAN Media System Advanced 7-inch MAN sound system Meiller Trigenius D316, 4,600 x 2,420 mm for loading crane Floor of tipper body made of HBW 450 steel, 5mm Cargo securing with floor and sidewall lashing rings Left side wall of tipper body with Bordmatik Right side wall of tipper body pendulum-mounted Rear wall of tipper body pendulum-mounted, 800 mm side and rear wall height Additional tipper hydraulic operation: Bordmatik EBS, ABS, ESP, ASR, EBA, LDW AttentionGuard Emergency brake assistant, Front Detection, Traffic sign recognition, Distance warning system Fuel tank 300L + 35L AdBlue Drum brakes Tire pressure monitoring system with temperature monitoring Special approval for heavy-duty/municipal operation Prepared for winter service Suspension: leaf/air Cab NN with rear wall window, pop-up roof, seat heating, steel bumper, central locking with remote control, Climatronic climate control 2 air horns HIAB loader crane type HiPro 352 E-7 Crane dimensions approx. 22,380mm x 2,506mm Hydraulic outreach approx. 4.4-16.2m Remote control XSDrive joystick 222 Sale exclusively to commercial customers, excluding any warranty. Errors and prior sale excepted. Fgsdpfxjy Hqmbj Aggog

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 4,100 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Mercedes Benz Sprinter 417 CDI, downgraded to 3.5t, with Leistikow B55C high-pressure cleaning system Internal Number: #526 Leistikow B 55 C * Auxiliary drive from the Sprinter * High-pressure pump AQUABAR KF30 * Approx. 106 liters / minute at 200 bar (40KW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 120m DN16 * Filling hose reel with approx. 60m DN20 * Approx. 1,000 liter water tank * Water shortage protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work spotlights * LED interior lighting * LED revolving beacon lights * Various storage options * Adjustable heavy-duty shelf * Standard cleaning nozzle equipment Special equipment: 2nd battery (auxiliary battery) in engine compartment, 3-button remote control for central locking, trailer socket 13-pin, battery disconnect switch 1-pole, driving assistance system: traffic sign recognition, suspension: stabilization level II, parking brake electric, all-weather floor mats, vehicle without tie-down points, gearbox lock for auxiliary drive, cup holder in front, grab handles on A-pillars, additional master key, rear door (opening angle 270 degrees), folding cover for storage compartment, connection strip for electrical connections (driver's seat box), comfort lighting in passenger / cargo area, charging package dashboard (USB sockets and 12V socket additionally), cable duct on rear portal, cable duct on side wall, navigation system for multimedia system MBUX, auxiliary drive 2 B with reduction gear, configurable special module, cross member for trailer coupling, cross member with integrated step, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, fuel gauge for auxiliary heater, separation relay for battery additionally, front axle reinforced, preparation for gearbox oil cooling, permissible gross weight 3.88 t, assist handle sliding door right Further equipment: Fgjdpfeyxkbcex Aggog 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: wiring for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio reception), roof light in cargo area with door contact, automatic activation for headlights, entry handle on rear pillar on the right, entry handle for sliding door on cargo area partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: driving information assistant, driving assistance system: attention assist (fatigue detection sensor), driving assistance system: intelligent speed assist, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, speed limiter 90 km/h, body / superstructure: standard van, instrument cluster with color display, communication module (LTE) for digital services, fuel tank: main tank 93 liters, cargo area partition, steering wheel with multifunction, truck registration, marking lights on the side, Mercedes

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 02/2026, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 7, total length: 7,004 mm, total width: 2,098 mm, total height: 2,352 mm, loading space length: 3,500 mm, loading space width: 2,040 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Exhaust system, EU6e (EA) * Front-wheel drive * 8-speed automatic transmission * 4-cylinder turbo diesel engine, 2.0 l/130 kW (4V) BIT * Start-stop system with brake energy recuperation * Towing hitch, fixed (incl. trailer stabilization) * Long wheelbase, 4,490 mm * Rear crossmember in wider design with L = 1,899 mm and H = 258 mm, bolted * Approved as 3.5t vehicle * Front axle, reinforced Fgodpszm D Nmsfx Aggjg * Permissible gross vehicle weight 3,500 kg * Wheel arch center with chrome emblem * 4 steel wheels 6 1/2 J x 16, with 1,050 kg load capacity, in black * Tires 235/65 R 16 C 115/113 R, all-season tires * Engine immobilizer, electronic * Electrical terminal block and pre-installation for towing system * 'Climatic' air conditioning in the cab * Daytime running lights with assist lights and automatic coming/leaving home function * LED headlights with LED daytime running lights * Preparation for cargo area lighting * Fog lights incl. cornering lights * Position lights on the roof, front * Preparation for a revolving beacon * Side marker lights * Step lighting * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, left and right, convex, with integrated LED turn indicator and wide-angle view * Normal roof * Rear window * Chassis with double cab * Radiator grille, black with chrome trim * Rain/light sensor for intermittent windshield wipers * Laminated windshield with heat-absorbing glazing * Front bumper in grey with painted trim strip in vehicle color, cab rear wall without cladding * Airbag for driver and front passenger with front passenger airbag deactivation * Roof console with storage compartments, two 1-DIN slots, and reading light * Sun visors, foldable and swivelable to the side * Electronic parking brake * Premium interior noise damping measures * Glove compartment with lockable lid, illuminated * Safety interior mirror, anti-dazzle * Leather multifunction steering wheel, heated with Tiptronic * 12V socket and 2 cup holders in the instrument panel * Three-point automatic seat belts with height adjustment and electric belt tensioners in the front, 12V sockets in the cab * 2 remote control keys * Keyless Go * Chrome package * 4-seater bench seat in the second row * Suspension seat 'ergoActive' on the left, double seat bench on the right, with storage compartment and foldable center backrest * Seat covers in fabric 'Toronto Grid' * Seat heating, right, separately adjustable * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased charging capacity * 4 speakers: 2 tweeters, 2 woofers * Navigation system (Baseline) * MAN Media Van Navigation Business * Digital radio reception (DAB+) * MAN Media Van Navigation Business package * MAN SmartLink * MAN Connect (emergency call services / in-vehicle apps / navigation, device-dependent), with OCU high * Comfort telephony with LTE and wireless charging * With voice control * Hill start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * Park distance control, front and rear * Cruise control * Traffic sign recognition * Rear view camera * High beam assist 'Light Assist' * Driver alertness and fatigue detection system * Active lane keeping assist * Intelligent speed assist * With multifunction camera * Platform body with aluminum drop sides (foldable), lashing eyes, step (rear on drop side flap) * Stone chip protection, without Efficient Line (no CO2 optimization) * Spare whee