Used Richter Pgm 500 for sale (15,355)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, spindle speed (max.): 18,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 100 mm, table load: 20 kg, The new price of the machine was EUR 39,875! TECHNICAL DETAILS Dedsx Hfzmjpfx Ac Necg Travel range Travel in X: 500 mm Travel in Y: 500 mm Travel in Z: 100 mm T-slot table X: 700 mm Y: 570 mm Maximum table load: 20 kg Spindle data HFS spindle power: 80 W HFS spindle speed: 18,000 rpm Movement Rapid traverse: 100 mm/s Repeatability: 0.01 mm Tool holder: 6 mm MACHINE DETAILS Electrical connection: 240 V Software: Signumeric EQUIPMENT Bellows covers Cable drag chains Jäger engraving spindle 42-2 W27 FS incl. frequency converter Reinforced base frame Heat dissipation via spindle support 2 m cable outlet Quick-change holder for customer-supplied electric scriber

Condition: new, functionality: fully functional, Carton Erector Advanced 400 Fully Automatic Net Price: €24,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L145–400 mm (up to 650 mm on request) 2. Product width: W80–350 mm (up to 500 mm on request) 3. Product height: H150–350 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 48 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2450 x 1380 mm 10. Air consumption depends on packing speed Dcodpfx Acoya Dh Ds Njg Carton Erector Advanced 500 Fully Automatic Net Price: €27,500 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L275–500 mm (up to 650 mm on request) 2. Product width: W140–400 mm (up to 500 mm on request) 3. Product height: H140–400 mm (up to 500 mm on request) 4. Packing speed: 5–30 cartons/min 5. Maximum tape width: max 58 mm (other sizes on request) 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.1 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2850 x 2000 x 1400 mm 10. Air consumption depends on packing speed Carton Erector Advanced 650 Fully Automatic Net Price: €29,900 Features of the System: 1. Modern design with robotic arm 2. Active servo-controlled 90⁰ carton folding 3. Single magazine carton feed 4. Bottom closure with adhesive tape 5. Five servo drive systems 6. Steel frame construction 7. HMI control panel 8. Standard operation from left to right, available in both directions 9. Documentation in the local language Technical Specifications: 1. Product length: L285–650 mm 2. Product width: W280–500 mm 3. Product height: H150–500 mm 4. Packing speed: 5–25 cartons/min 5. Maximum tape width: max 75 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 2.35 kW 8. Machine weight: approx. 620 kg 9. Machine dimensions: approx. 2920 x 2100 x 1500 mm 10. Air consumption depends on packing speed

Condition: used, Dear Sir or Madam, We are pleased to offer the following equipment for sale: Keyence VL-500 measuring system. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Dcedsy Iaa Tspfx Ac Nsg Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. Dcsdoy Iw Injpfx Ac Nsg - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: new, functionality: fully functional, power: 4 kW (5.44 HP), fuel type: diesel, overall weight: 550 kg, maximum load weight: 500 kg, chain condition: 100 %, Year of construction: 2025, Equipment: hydraulics, rubber tracks, Crawler Dumper 500S The professional lift dumper for maximum efficiency on the construction site The Crawler Dumper 500S delivers powerful material transport, precise dumping, and reliable technology. Its hydraulic lifting function up to 1,200 mm makes it the ideal solution for direct unloading into containers, trailers, or elevated loading areas—efficient, safe, and time-saving. Thanks to its compact dimensions, high payload, and robust construction, the Crawler Dumper 500S is perfect for confined construction sites, rough terrain, and demanding continuous use. Your Advantages: - Hydraulic lifting and tipping function (90°) for convenient unloading - Lifting height up to 1,200 mm—ideal for containers and trailers - Powerful Koop 173 diesel engine (4.0 kW, EU Stage V) - High payload of 500 kg with compact external dimensions - Optimum traction thanks to wide crawler undercarriage - Durable, low-maintenance design - Ideal for construction, landscaping, municipalities, and agriculture Technical Data: Engine: Koop 173 diesel engine Power: 4.0 kW Emission standard: EU Stage V Performance & Capacity: Net weight: 550 kg Payload: 500 kg Skip volume: 200 dm³ Skip dimensions: 1,050 × 730 × 730 mm Lifting & Tipping Function: Max. lift height: up to 1,200 mm Tip height: 1,050 mm Tip reach: 220 mm Tip angle: 90° Operation: hydraulic Chassis: Chassis type: crawler undercarriage Track width: 180 mm Ground contact length: 1,000 mm Ground clearance: 110 mm Track gauge: 520 mm Performance: Travel speed: up to 4 km/h Climbing ability: up to 20° Minimum turning radius: 1,150 mm Dodpoyml D Hefx Ac Njcg Dimensions: Overall dimensions (L × W × H): 1,570 × 880 × 1,450 mm Undercarriage width: 700 mm The Crawler Dumper 500S excels wherever reliability, maneuverability, and lifting capacity are required: - Civil engineering and construction - Landscaping and horticulture - Municipal services - Agriculture - Material handling in confined spaces Net price: €3,800 (RRP) Location: Rheda-Wiedenbrück Viewing by appointment possible Save now—better prices available! Take advantage of our attractive offers. Enquiries worth your while!

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Dcedjy Nyq Ujpfx Ac Nog Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm Dedpfxjvuk S Us Ac Nscg ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Dsdpfx Acsyhnukj Necg Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: excellent (used), Key Information: Type: Scissor lift / lifting table Load capacity: 500 kg Condition: used – fully operational Controls: remote up/down + emergency STOP Power supply: 230/400V Year of manufacture: 2012 Price includes: complete set as shown in the photos ⚙️ Technical specifications: Load capacity: 0.5 t (500 kg) Lifting height: approx. 630 mm Motor power: 0.8 kW Operating pressure: 196 bar Weight: approx. 170 kg Table dimensions: approx. 90 x 60 cm Power supply: 3-phase 230/400V Protection rating: IP55 🛠️ Description: We offer a professional hydraulic scissor lift – ideal for use in workshops, manufacturing, and warehousing. The device allows for safe and convenient lifting of heavy components to an ergonomic working height. Features include: - Stable scissor construction - Hydraulic lifting system - Remote control (up/down + emergency STOP) Perfect for: - Assembly work - Packing - Service and production - Loading and unloading 📦 Set includes: - Scissor lift - Hydraulic power unit Dcsdpfx Asyw Ua Tsc Njg - Controls (remote) 🚚 Shipping: - Pallet shipping - Local pick-up possible

Condition: as good as new (ex-display), FRONIUS TPS 5000 Dcodpfx Acjwbknbs Nsg ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius intermediate hose package standard from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz Dcedpfx Ajyrhb Sjc Njg • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Dedpfoy Hgltsx Ac Nscg Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Available with QSA slots (quick format change by disabling selected needles without removing the slot) Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) 3-phase powered Weight: 120 kg

Condition: good (used), Tranklein BRM 500 Book block rounding machine The machine is in very good condition, fully serviced and ready to use. Dcsdey Hglmspfx Ac Nsg Model with electric book thickness adjustment. Technical specifications: Maximum working size: 500mm Maximum book thickness: 120mm Speed: 300 cycles/h Power supply: 400V Weight: 300kg Easy to use, quick to set up.

Condition: good (used), 1x Arburg 320C 500-170 with Multilift, safety fence, and discharge conveyor. Sold without Z-belt conveyor, temperature control units, and Koch vacuum loader. The machine is available at short notice by arrangement. Dodpfsyym Sasx Ac Necg

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm Dsdpfx Aoi Db Ibec Nscg ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. Dcjdsfim Thspfx Ac Nog throat 430 mm table size 1100 x 750 mm ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system. Djdpfoyy Ripox Ac Necg

Condition: good (used), The scope of delivery includes: 16x shelf connectors, used Manufacturer: Nedcon Type: NS Material color: orange Dcsdpsi Euu Uefx Ac Nog head plate dim.: approx. 140 x 117 mm for a shelf distance of: approx. 500 mm suitable for a frame profile: 120 mm profile dim.: approx. 60 x 40 mm Drill hole diameter: approx. 10 mm Weight: 1,75 kg/ pcs.

Condition: good (used), The scope of delivery includes: 217x shelf connectors, used Manufacturer: Nedcon Type: NS Dcsdpfxoi Euvce Ac Neg Material color: orange head plate dim.: approx. 140 x 117 mm for a shelf distance of: approx. 500 mm suitable for a frame profile: 120 mm profile dim.: approx. 60 x 40 mm Drill hole diameter: approx. 10 mm Weight: 1,75 kg/ pcs.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Manufacturer: Nedcon Type: NS Material color: orange head plate dim.: approx. 140 x 117 mm for a shelf distance of: approx. 500 mm suitable for a frame profile: 120 mm profile dim.: approx. 60 x 40 mm Drill hole diameter: approx. 10 mm Dedpsi Euu Rjfx Ac Necg Weight: 1,75 kg/ pcs.

Condition: new, Year of construction: 2026, Your contacts in our company Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in delivery: 01x End Frame Extension, new Version: Universal Material color: RAL 5010 Gentian Blue Total height: 650 mm Usable height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle Perforation grid: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.83 kg each Dodpsdd Ev Nofx Ac Nscg Our services at a glance: (Prices upon request) - Assembly, installation Our general assembly terms and conditions apply - Rack inspection Inspection of racking systems according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 visual inspection for all rack systems - Delivery with our own fleet (Without unloading) Shipping costs upon request!

Condition: new, Year of construction: 2026, Your contacts at our company: Dcedpfx Acedd Ewbs Nsg Mr. Andre Evering Mr. Mario Klöver Mr. Simon Blank Included in delivery: 01x Upright extension, new Design: Universal Material color: RAL 1018 Zinc Yellow Total height: 650 mm Usable height: 500 mm Telescopic: 600 – 1,150 mm depth Frame profile dimensions: 45 x 45 mm angle bracket Perforation pattern: 5 x 25 mm Hole diameter: 30 x 10 mm Weight: 6.52 kg / each Our services at a glance: (Prices on request) - Assembly and installation Please observe our general installation terms and conditions - Racking inspection Rack inspection according to DIN EN 15635, carried out in compliance with the requirements of BGR 234 visual inspection for all racking systems - Delivery with our own fleet (without unloading) Shipping costs on request!

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 20,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: 38 mm particle board, P6 grade, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanines can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus transport costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus transport costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus transport costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus transport costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus transport costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus transport costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus transport costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus transport costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus transport costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus transport costs and VAT Further versions available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal struts instead of bracing crosses, at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann Dcodpfx Acexpic Ro Nsg - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. The additional costs depend on the place of delivery and shipping volume and can be quoted individually on request. TERMS OF PAYMENT Terms of payment must be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. Please do not hesitate to contact us if you have any questions. 'Vier gewinnt' – The four success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 20,000 x 15,000 mm [other configurations available] - Grid: 5,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm [customizable] - Flooring: chipboard 38 mm P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new The mezzanine platforms can be extended within the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Support columns - Main and secondary beams - Cross bracing - Flooring - Fixing materials Price examples: 25 m² | Area: 5,000 x 5,000 mm | €2,445.00 net, plus transport and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,335.00 net, plus transport and VAT 75 m² | Area: 5,000 x 15,000 mm | €6,170.00 net, plus transport and VAT 100 m² | Area: 5,000 x 20,000 mm | €8,035.00 net, plus transport and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,945.00 net, plus transport and VAT 150 m² | Area: 10,000 x 15,000 mm | €11,415.00 net, plus transport and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,985.00 net, plus transport and VAT 300 m² | Area: 20,000 x 15,000 mm | €21,425.00 net, plus transport and VAT 400 m² | Area: 20,000 x 15,000 mm | €28,155.00 net, plus transport and VAT 500 m² | Area: 20,000 x 25,000 mm | €33,935.00 net, plus transport and VAT Other configurations available Optional accessories: Dsdpoxpii Refx Ac Nocg - Handrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross bracing (at extra cost) YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. Our planning department will prepare a customized, non-binding offer based on your specifications. Whether a new build, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the product. This item is available for collection. Delivery or shipping is available at additional cost. Extra charges depend on the delivery location and shipment size and can be quoted individually. PAYMENT TERMS Payment terms to be agreed upon when ordering. The price is quoted per unit/net price or as stated in the description text (plus VAT). You will of course receive an invoice indicating VAT. ✅ Four wins – The DLK success factors – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other versions available] - Grid spacing: 4,000 x 5,000 mm - Finished floor level: 3,340 mm - Clear height: 3,000 mm [customizable] - Flooring: 38 mm particle board P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Cross bracing - Flooring - Fastening material Dodpfx Acexpha Ij Nocg EXAMPLE PRICES: 20 m² | Area: 4,000 x 5,000 mm | €2,135.00 net, plus transport costs and VAT 40 m² | Area: 4,000 x 10,000 mm | €3,825.00 net, plus transport costs and VAT 60 m² | Area: 4,000 x 15,000 mm | €5,435.00 net, plus transport costs and VAT 80 m² | Area: 4,000 x 20,000 mm | €7,215.00 net, plus transport costs and VAT 40 m² | Area: 8,000 x 5,000 mm | €3,725.00 net, plus transport costs and VAT 80 m² | Area: 8,000 x 10,000 mm | €6,519.00 net, plus transport costs and VAT 120 m² | Area: 8,000 x 15,000 mm | €9,695.00 net, plus transport costs and VAT 160 m² | Area: 8,000 x 20,000 mm | €12,755.00 net, plus transport costs and VAT 120 m² | Area: 10,000 x 12,000 mm | €8,995.00 net, plus transport costs and VAT 80 m² | Area: 16,000 x 5,000 mm | €6,785.00 net, plus transport costs and VAT 160 m² | Area: 16,000 x 10,000 mm | €12,472.00 net, plus transport costs and VAT 240 m² | Area: 16,000 x 15,000 mm | €18,108.00 net, plus transport costs and VAT 320 m² | Area: 16,000 x 20,000 mm | €23,565.00 net, plus transport costs and VAT Optional accessories: - Railings - Flush wall connection - Staircase - Transfer station - Impact guard - Diagonal supports instead of cross bracing available at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ TAILOR-MADE DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your operational requirements – tailored to area, load capacity, installation height, and the intended field of use. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at extra cost. Additional charges depend on the place of delivery and consignment scope, and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The price is quoted as a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveying technology, mezzanines, textile storage, as well as machines for trade, industry, and crafts. ✅ Four winning pillars – The building blocks for DLK's success – Storage technology | Levelmaker® | Logistics | Solutions