Used Colchester Master 2500 for sale (64)

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg Dsdpfeu St S Asx Adajwd

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm Djdpfx Aeufud Redaewd total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: ready for operation (used), lathe Colchester Master Dwjdpsd Hdqvjfx Adajd

Year of construction: 2015, operating hours: 5,000 h, condition: ready for operation (used), General Data Machine weight 1800kg Dwsdpfxsxqials Adasd Main Drive Spindle speed range 2500 This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   Dedpfjxldidjx Adaowd MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Chuck Guard Lighting Coolant System Rear Splashguard

Condition: good (used), Centre height: 195 mm Distance between centres: 1250 mm Max. swing diameter over bed/cross slide: 400/265 mm Dwedpfx Adsxlg Dwjaod Spindle mount/bore: Camlock D1-6"/54 mm Tailstock quill taper: MT 5 Spindle speeds steplessly adjustable in 3 ranges: 0 - 2500 rpm Longitudinal feeds: 0.018 - 1.2 mm/rev Cross feeds: 1/2 of longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 imperial (inch) threads: 2 - 56 TPI 20 module threads: 0.2 - 3.5 module 20 diametral pitch threads: 8 - 56 DP Electrical connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Condition: new, Year of construction: 2025, 0330 mm 210 mm 1000 mm 167 mm 40 mm Dedpfx Aowp Tq Uodaewd 2,2 kW

Condition: excellent (used), Year of construction: 2000, Colchester Student 2500 3-axis digital readout Dwsdpsw R S Awefx Adaod Collet chuck setup Various accessories

Condition: good (used), functionality: fully functional, turning diameter: 400 mm, turning diameter over top slide: 240 mm, center height: 200 mm, turning length: 1,100 mm, total length: 2,500 mm, total width: 1,100 mm, total height: 1,900 mm, spindle speed (max.): 2,500 rpm, overall weight: 1,500 kg, three-jaw chuck diameter: 240 mm, TECHNICAL SPECIFICATIONS & EQUIPMENT: Operating voltage: 380 V Frequency: 50 Hz Rated current: 21 A Spindle speed: 75–2500 rpm Dwodpfx Adow U Tn Noajd Spindle bore: approx. 52 mm Centre distance: 1100 mm Centre height over bed: approx. 200 mm Swing over bed: 400 mm Centre height over cross slide: 120 mm Swing over cross slide: approx. 240 mm The machine is equipped with a tailstock, a Multifix tool holder, and a 3-jaw chuck Diameter: 240 mm Including two-axis digital readout by manufacturer FAGOR REFERENCE NUMBER: 14 DIMENSIONS & WEIGHT: 2500 x 1100 x 1900 mm 1500 kg PICK-UP INFORMATION: The item will be available from September 2025. A collection date must still be arranged on a specific day from 01.09.2025 onwards FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Dodpfxorx Rwne Adaewd Spindle speeds 20-3250 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1992, Lathe Colchester Master 3250, year of manufacture 1992, manual lathe, several chucks and holders, digital readout in 3 axes Dodpfx Asxdxa Uedajwd Technical Data: Turning diameter: 300 mm Centre height: 170 mm Centre distance: 650 mm Swing over bed: 350 mm Swing over cross slide: 196 mm Spindle bore: 42 mm

Condition: ready for operation (used), Colchester Triumph 2500 Lathe Swing over bed: 400 mm Swing over cross slide: 246 mm Distance between centres: 1270 mm Centre height: 195 mm Dwsdexfrgdepfx Adasd Max. turning diameter: 585 mm Spindle motor power: max. 7.5 kW Spindle speed: max. 2,500 rpm Infinitely variable spindle speed ranges: - low: 14–300 rpm - medium: 36–830 rpm - high: 109–2,500 rpm Overall dimensions: 2,600 mm x 1,300 mm x 1,800 mm (L x W x H) Accessories: 5 Multifix tool holders Steady rest Live and dead centers Drill chuck Jaws Cabinet Coolant pump You are welcome to come and inspect the machine. We are happy to organize affordable shipping for you. You will receive a proper invoice. A net invoice can be issued for international customers with a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may be subject to deviations, and errors in the item description may occur and are reserved.

Condition: new, Year of construction: 2025, 0400 mm 246 mm Dsdpfx Adjxcyxcsajwd 1250 mm 195 mm 54 mm 7,5 kW

Condition: good (used), Used COLCHESTER MASTER 3250 center lathe and feed spindle lathe center height 170mm center distance: 650mm spindle bore: 42mm Infinitely variable speed from 15-3250 rpm Dodpfxsuqkf No Adajwd 1 x SCHUNK wedge bar lathe chuck Ø160mm 1 x MULTIFIX steel holder size B with 4 inserts Machine light, chuck protection electrically fused, machine shoes 1 x rotating center point, 1 x rotating center point with pressure indicator 1 x drill chuck with tapered arbor The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Dwjdpjtr Ud Sjfx Adaod Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: excellent (used), Swing over bed 400 mm Distance between centers 650 mm Spindle speeds 0-2500 rpm Dwedpfx Aoq Dll Dedasd Misc. accessories MARCELS MASCHINEN CH

Condition: new, Year of construction: 2025, 0400 mm 246 mm 1250 mm 195 mm 54 mm Dwjdpfjwp Tpqex Adaod 7,5 kW

Condition: new, Year of construction: 2024, 0350 mm 196 mm Dwjdpfx Adswp Tpkeajd 0650 mm 170 mm 42 mm 7,5 kW

Condition: new, Year of construction: 2025, 0330 mm 210 mm Dwsdpfx Ajwp Tfxsdajd 0635 mm 167 mm 40 mm 2,2 kW

Condition: new, Year of construction: 2025, 0330 mm 210 mm 0635 mm 167 mm 40 mm 2,2 kW spindle turning speed - stepless 30-3000 U/min Dwedpfx Adewp Tbmjaod

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, spindle bore: 102 mm, turning length: 2,000 mm, turning diameter over bed slide: 554 mm, center height: 284 mm, spindle speed (max.): 1,800 rpm, No reserve price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Bidding obligates prompt collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over cross slide: 370 mm Swing diameter over bed and carriage wings: 554 mm Swing diameter in the gap: 830 mm Turning length: 2,000 mm Centre height (over bed): 284 mm Dwjdpfxsxm Sm Hs Adaed Length in front of face plate: 196 mm Spindle centre height from floor: 1,238 mm Max. working length between centres: 2,152 mm Maximum spindle speed: 1,800 rpm Centre distance: 2,032 mm Spindle nose: D1-11 CAMLOCK Spindle bore taper: No. 5 MT Spindle bearing diameter: 145 mm Spindle bore: 102 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,800 x 1,800 mm Total weight: 4,250 kg EQUIPMENT Toolpost

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: 9/0002A/00053, SPECIFICATION Centre height 315mm Distance between centres 1500mm Swing over bed 635mm Swing over cross slide 390mm Spindle bore (max. bar dia) 115mm Spindle nose mounting D1-11 Camlock Taper in spindle nose and tailstock barrel No. 6 Morse Swing in gap 900mm Width of bedways 480mm Total travel of cross slide 380mm Total travel of top slide over bedways 165mm Total travel of tailstock barrel 190mm Spindle speeds (24) 6.3 – 1250rpm Drive vee belt and clutches Spindle motor 15kW Whitworth threads (88) ¼ - 112TPI Diametral threads (41) 1-60DP Metric pitches (70) 0.2 – 112mm Module pitches (37) 0.3 – 24 MOD Machine in Metric execution   Djdpfx Adsxtnvqeaswd MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 off toolholders High speed threading unit Bedstop Rotating centre Stationary steady Rapid power traverse to saddle Lighting Coolant system Chuck guard

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC Lathe Dwjdjxnzqkspfx Adasd Colchester Tornado A90 Year of manufacture: 2001 CNC Control: Fanuc Series 21i-T Technical Data Max. turning diameter over bed (Swing over bed): approx. 410 mm Max. turning diameter over tailstock / over carriage: between 170–230 mm Max. turning length (Z-axis): 450 mm X-axis (travel): 200 mm Z-axis (travel): 450 mm Spindle & Drive Max. spindle speed: 4,000 rpm Spindle motor (rated power): approx. 11 kW Spindle bore / bar capacity: 52 mm Spindle nose: A2-5 / ASA 5 Accessories / Equipment (on offers with bar feeder) Bar feeder: often combined with e.g. TORNADO MBF-1000 Hydraulic collet chuck system Chip conveyor, parts catcher Dimensions: Base machine A90 (without bar feeder): approx. L ≈ 2,362 mm, W ≈ 1,150 mm, H ≈ 1,620 mm With bar feeder (MBF1000T): Bar feeder length approx. 1,675 mm Weight: 2,415 kg

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rear chip guard Coolant device Work light Dwjdpoxnqzxofx Adaed manual available

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/0001/09472, MACHINE SPECIFICATION Distance between centres 635mm Centre height 165mm Swing Swing over bed 335mm Swing over cross slide 209mm Dwjdpfxsxn Iv Ts Adaed Spindle Bored to pass 40mm dia Nose D1-4 Camlock Morse taper in nose N0 3 Width of bedways 231mm Travel Total travel of cross slide 209mm Total travel of top slide 95mm Total travel of tailstock barrel 146mm Speeds Spindle speeds (16) 22-1800rpm Spindle motor 2.25kW MACHINE SPECIFICATION Cont’d Whitworth threads (45) 2-72tpi Diametral threads (21) 8-44 Metric pitches (39) 0.2-14.0mm Module pitches (18) 0.3-3.5 Feeds Sliding feeds 0.001-0.040 ipr/spindle Surfacing feeds 0.0005-0.020 ipr/spindle Tailstock Approx weight 800Kg Machine in Imperial execution MACHINE EQUIPPED WITH 3 jaw chuck Quick change toolpost and 6 off toolholders Ainjest high speed screwcutting attachment Single bedstop 5 Position turret bedstop Apron dial Chuck guard Coolant system Rear splashguard