Used Ring Rolling Machine for sale (70,509)

Condition: new, Year of construction: 2026, Profile Bending Machine ZOPF - Model ZB 110/3 H TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller Njdpfx Aedkxibjbuolh - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 80 mm - roller diameter: 260 mm - shaft rpm: 7 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 2,2 kW - motor for hydraulic: 1,5 kW - hydraulic pressure: 27 to. - adjusting way: 170 mm - weight: 1400 kg - dimensions: 980x1430x1600 mm

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph Nlsdpfx Abst Hwfnsueh - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 4HEL, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 240 mm, sheet thickness (max.): 28 mm, sheet thickness steel (max.): 28 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 28 mm, overall weight: 11,500 kg, total length: 4,200 mm, total width: 1,950 mm, total height: 1,650 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: centralized greasing system, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 roll plate bending machine linear guideways Faccin model 4HEL capacity 2100 x 28 mm Used in perfect condition year of make 2006 Nlsdo Afu Saopfx Abush Plate bending capacity Plate width 2000 mm Rolling thickness 25mm Plate prebend 20 mm smaller bending capacity ID 400 mm Rolls length 2100 mm Upper roll dia 350 mm Pinch roll dia 330 mm Siderolls dia 240 mm Electric motor Kw 18,5 on hydraulic unit Vac 400/50 Weight of the machine 11500 kg Layout mm 4200 x 1950 x H 1650 mm Hardened surface of the 4 rolls of the rolls high strength Driven rollers hydraulic powered with axial gear unit rotation Opening of top roll hydraulic drop-end to unload the plate being formed Variable speed working roll bending rotation hydraulic speed fast/slow up to 7 mtr/min Console electric with centralized commands joysticks and digital readout 3 axis. Digital readouts of the rolls position

Condition: new, Year of construction: 2025, Bending machine ZOPF new - model ZB 80/3 H - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm - weight: 680 kg - dimensions: 900x800x1300 mm Nledpfx Abedkxiyjujh

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, machine/vehicle number: HDTS 2050X22, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 320 mm, roller (top) diameter: 320 mm, side roll diameter: 290 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 25 mm, overall weight: 9,800 kg, total length: 4,400 mm, total width: 2,050 mm, total height: 1,660 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, PLATE BENDING MACHINE 4 ROLL HYDRAULIC 2000 X 22 MM brand OMCCA YEAR 2004 DOUBLE INITIAL PINCH Machine used in excellent condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 22 mm - Prebend thickness 16 mm Minimum bending diameter ID 400 mm Rolls dimensions: Useful length 2050 mm Nsdpfxj Afzunj Abujlh central rolls upper/lower D 320 mm side rolls left/right D 290 mm Hardened rolls surface high strength Driven rollers rotation central upper and lower Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. Opening of top roll hydraulic drop-end to unload the plate being formed Wide opening plate feed up to 90 mm between the central rollers Variable speed working roll bending rotation automatic slow/fast Console electric on wheels with centralized commands joysticks and digital readout 3 axis. Digital position readouts of the rolls Power electric 15 Kw voltage 3-phase 380 /50 Dimension 4400 x2050 x H 1660 mm - weight 9800kgs

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use Nodpfodkxlkjx Abuelh - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm - main motor 1,5 kw - shaft diameter 50 mm - weight 325 kg - 400 volt 3 phase

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Nedpfx Ajyurx Tebuslh Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: new, Year of construction: 2026, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - three driven shafts Njdpfx Asd Eyz Ujbuslh - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg

Condition: good (used), overall weight: 2,300 kg, spindle diameter: 0 mm, total height: 1,375 mm, total length: 1,645 mm, total width: 1,520 mm, One - Good used Profiroll Model UPWS 16 - 16 ton Hydraulic Thread Rolling Machine with swivelling spindles for in-feed or thru-feed rolling. Max threaded dia. 70mm Min. threaded dia. 3mm, Max width in=feed rolling: 150mm, rolling spindlle dia.: 69.85mm Nodpfx Aozt R T Ejbuelh power of main motor: 6.5 kw Complete with coolant equipment, work rest blade holder and five sets of thread dies.

Condition: used, Thread rolling machine UPWS 25. Nledpfx Abszd Rf Nsuoh

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60 MD Nodod Eyp Ijpfx Abuslh - with digital readout - motorized - two working rolls - shaft diameter 30 mm - including standard rolls - with basement - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 180 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase

Condition: excellent (used), overall weight: 1,350 kg, spindle diameter: 40 mm, type of input current: three-phase, total height: 1,500 mm, total length: 1,000 mm, total width: 1,000 mm, One - Very Good Used ORT Model RP10/U - 10 ton Hydraulic Thread Rolling Machine with swivelling spindles for in-feed or thru-feed rolling Max. threaded diameter: 30mm Min.threaded diameter: 2mm Max. width in-feed rolling: 65mm Power of main motor: 4 kw Nledpfszt R Rwex Abueh Complete with coolant equipment , work rest blade holder ,open fronted spindle front supports for easy access with small dia. components - 13 set of in-feed thread dies

Condition: new, Year of construction: 2025, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical Nljdjd Ey A Aopfx Abuoh - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: two axes controlled touch screen memorize of 1000 programs interpolation

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 4691, thread length: 125 mm, overall weight: 2,000 kg, workpiece diameter (max.): 70 mm, spindle diameter: 6,985 mm, type of input current: three-phase, roll diameter: 195 mm, spindle speed (max.): 90 rpm, spindle speed (min.): 20 rpm, total height: 1,185 mm, total length: 1,320 mm, total width: 1,090 mm, This is a fine example of a very little used Eurfurt thread rolling machine. Although the machines signifies 12.5tons it can easily achieve 20tons rolling force. Nlsdpfx Abszhw Edjujh Comes with all original equipment supplied. Machine can be used in manual, semi-automatic and automatic cycles and also has the facility to re-roll. Can be seen running.

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. Nodpfxsglaq Ij Abuelh - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm Nedpfx Absymlx Dsujlh

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ Nledexya Hzepfx Abujh 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw Nsdpeyml Eksfx Abuolh With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Photographs taken before reconditioning

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 0049, overall weight: 12,000 kg, Manufacturer: Profiroll Type: UWRA 160S Control system: Siemens Machine type: Ring rolling machine Pressing force: 63 t Max. outer diameter of round parts: 160 mm Nedoz Tznrepfx Abuslh Dimensions: 80 mm Roller bore: 30/100

Condition: good (used), functionality: fully functional, Year of construction: 2010, control type: manual, actuation type: hydraulic, number of rollers: 3, sheet thickness (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 1,100 kg, Equipment: centralized greasing system, cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, Bending length: 1.050 mm Bendingcapacity: 5.0 mm Steel 3.0 mm Stainless steel 6.0 mm Aluminium Nlsdpfx Aez Tdg Dsbujh Upper roll: Ø130 -> 75 mm Lower rolls: Ø130 mm Featured with: - Hydraulic drop end - 3-rolls driven - Hand-footcontrolled

Condition: used, functionality: fully functional, Rolling machine Brand: PICOT Capacity: 4050 x 14 Type: CRH 4014 Diameter of the 3 cylinders in the middle: 465 mm Diameter of the 3 cylinders on the sides: 460 mm Engine power: 50 hp Nedpfx Abj Afurgjuelh Thrust on one cylinder: 90 tons Pump flow rate: 72.5 l/min Maximum speed of movement of coupled gripping rollers: 9 mm/s Maximum speed of movement of independent gripping rollers: 11.5 mm/s Weight: 29 tons

Condition: excellent (used), Akbend ASM140 Bending Rolls 3 Rolls 140mm top roll 1250mm length x 5mm thickness Year 2007 Nlodpfx Ajz Hdv Djbuoh Motor power 2.2kw

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons Maximum width: 600 mm Coil inner and outer diameters: 508–920 mm Hydraulic claw extension: 460 > 640 mm 4 kW Roll Forming Line Type H 18 stations Maximum width: 600 mm Maximum thickness: 0.8 mm Shaft diameter: 60 mm Maximum center-to-center shaft distance: 300 mm Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Nlodpfxsz R S T Uo Abujh Force: 5 metric tons Condition: machine has seen very little use Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine MODEL M3035 , year 2024 machine as new with warranty included Planetary dual pre-pinch plate prebend SPECIAL FRAME WITH TOP ROLL REDUCED SIZE 300 MM TO ACHIEVE SMALLER BENDING DIA 330 MM Performance Capacity: Plate width 3000 mm plate thickness rolling 22mm pre-bend 20 mm minimum rolling diameter ID 330 mm usefull surface width on the rollers 3100 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine to agree on request nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id Nodpfx Abey Tbf Isuslh nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: used, functionality: limited functionality, overall weight: 2,100 kg, workpiece diameter (max.): 70 mm, spindle diameter: 54 mm, type of input current: three-phase, spindle speed (max.): 114 rpm, spindle speed (min.): 24 rpm, roll width: 160 mm, stroke length: 15 mm, SENY D-75-B – Hydraulic Thread Rolling Machine – 220 kN For sale is a fully functional hydraulic thread rolling machine from the Spanish manufacturer SENY, model D-75-B, with a maximum rolling force of 220 kN. Nedpfx Ajz Sl Arsbujlh Due to operational changes, the machine has been taken out of service and is no longer in productive use. However, it is still operational and can be inspected and demonstrated under power after prior appointment. The machine is designed for chip-free cold forming of external threads, as well as for knurling and profile rolling operations. The thread rolling process enables the production of high-strength threads with very good surface quality, without removing material. Technical data General information Manufacturer: SENY Country of manufacture: Spain Type: D-75-B Factory number: 327 Machine type: Hydraulic thread rolling machine Year of manufacture: Unknown Operating voltage: 380 V three-phase Rolling capacity and machining range Maximum rolling force: 220 kN (approx. 22.4 t) Workpiece diameter: 3–70 mm Maximum thread pitch: 6 mm Maximum knurling pitch: 2.25 mm Maximum rolling width: 160 mm Rolling spindles Rolling diameter: 133–170 mm Rolling spindle diameter: 54 mm (standard version) Rolling spindle spacing: 135–230 mm Rolling spindle speeds: 24 / 30 / 38 / 45 / 62 / 72 / 90 / 114 rpm Hydraulics and feed Hydraulic roller feed Maximum working stroke: 15 mm Feed speed: 0.5–6 mm/s Adjustable rolling time: 0.1–100 seconds Adjustable pause time: 0.1–100 seconds Hydraulic oil tank: approx. 130 liters Drive power Main motor: 5.5 kW Total electrical power consumption: approx. 8.6 kW Weight Machine weight: approx. 2,100 kg Condition and scope of supply Used industrial machine Fully functional Taken out of service due to operational changes Machine is still operational Inspection and demonstration under power possible after prior appointment No thread rolling tools or rolling sets included in the scope of supply Possible applications The machine is particularly suitable for the production of external threads on screws, bolts, threaded rods and other cylindrical workpieces. In addition, knurling and profile rolling operations are possible with the appropriate tools. The robust machine design and hydraulic feed enable use in both single-piece production and series production. Inspection and further information The machine can be inspected and demonstrated under power after prior appointment. Further information and pictures are available on request. Note: The technical data is based in part on manufacturer and comparative documentation of the SENY D-75-B series. Deviations due to the year of manufacture or design may occur. All information without guarantee. Subject to prior sale.