Used Ruhrmann Pressen Esr15H for sale (187)

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch Itsdpfxsyc R Uis Ad Iel CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Iodpfx Aeyc R Nmod Iotl Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm Iedswgakvopfx Ad Iotl For sale is a hydraulic portal straightening press from ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and is equipped with an integrated tooling clamping device as well as parallel control for bending blades. Thanks to its movable table, sliding cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 500 t ==== General Specifications - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Design: Gantry press - Machine type: Sliding table press / Straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table in grid construction - Cylinder horizontally traversable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s - Pressing speed: depending on load ==== Hydraulics & Performance - Pressure setting: 80–500 t via rotary control - Pressure build-up time: max. 3 sec. - Free breakout force: max. 800 kN - Oil temperature monitoring available - Lubrication via grease nipples ==== Construction & Features - Integrated tool clamping device - Parallel holding for bending blade - Induction-hardened cylinder - Machine body powder-coated / double painted - T-slots to customer specification ==== Operation & Safety - Remote control - Robust construction for industrial applications ==== Accuracy - Deflection: ≤ 1.2 mm/m (at 70% load) ==== Straightening operations, bending processes, toolmaking, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are constructed according to German machinery guidelines as well as European Machinery Directive (2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our core strengths are special purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Condition: used, Year of construction: 1994, machine/vehicle number: 6915, functionality: unexamined, operating hours: 27,436 h, pressing force: 80 t, stroke length: 300 mm, table width: 500 mm, table length: 700 mm, ram plate width: 400 mm, ram plate length: 500 mm, distance table to ram: 500 mm, oil tank capacity: 485 l, overall weight: 6,500 kg, Equipment: documentation/manual, safety light barrier, We are offering this used HYDRAP PRESSEN HPSK80 hydraulic press, year of manufacture 1994. Manufacturer: HYDRAP PRESSEN Model: HPSK80 Year of manufacture: 1994 Condition: used Isdpfxox Ti Aus Ad Istl Category ID: 1330 Type ID: 1231 Machine type: hydraulic press If you have any questions or require further information, please feel free to contact us by message or phone.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: W202001, table length: 800 mm, table width: 550 mm, Equipment: documentation/manual, H-Frame Press – 30 t – Double-column Press – 800 × 550 mm – Versatile Assembly & Production Press For sale: hydraulic double-column press (H-frame press) with a pressing force of 30 t. The machine is highly versatile and can be used as an assembly press, small batch press, hand-loading press, vulcanizing press, or heated platen press. This is an approximately 2.5-year-old, unused machine with zero operating hours, offered with full warranty. Inspection is possible at our warehouse in Ennepetal. ===== Technical Specifications & Information: Hydraulic Double-Column Press – 30 t ==== General Information - Design: Double-column press (H-frame) - Pressing force: 5–30 t (adjustable) - Machine weight: approx. 2,000 kg - Paint finish: RAL 7035 (Light Grey) / RAL 2009 (Orange) ==== Working Area - Table size: 800 × 550 mm (additional variant: 700 × 500 × 70 mm) - Ram plate: 700 × 500 × 80 mm - Max. distance table/ram: 500 mm - Stroke: 500 mm - Front opening width: 820 mm - Table height: 800 mm ==== Speeds - Approach speed: approx. 45–50 mm/sec - Return speed: approx. 40–55 mm/sec ==== Hydraulics - Operating pressure: up to 300 bar - Hydraulic pump: ASC, 28.5 l/min - Motor power: 11 kW - Oil tank: approx. 100 l - Valves: Bosch Rexroth ==== Construction & Guidance - Cylinder: Ø 110 mm (piston), Ø 70–75 mm internal - Guide columns: Ø 50 mm - Ram guided by 2 columns - Robust machine frame - Rear and side guards fully enclosed ==== Control & Operation - Pressing pressure adjustable via rotary control - Adjustable two-hand operation (3 m supply cable) - Position limitation via cam switch - Travel limitation via movable sensors - Automatic positioning to defined stroke points - Resettable piece counter ==== Safety - Light curtain 500 mm (14 mm resolution, finger protection) - Reach-under protection Iedju U Ey Iopfx Ad Iotl - Optional reach-over protection - Emergency stop switch - Certified safety inspection ==== Equipment - Control cabinet technology from brand manufacturers - Illumination in press workspace - Eject chute in table ==== Options - Heated platens: 500 × 500 mm (up to 200 °C, with controller & timer) - Commissioning & operator training ==== Lead Time & Service - Delivery time: approx. 6 weeks (without heated platens) - Heated platens: approx. 8 weeks - Customer service: Dresden, Hamburg, Ennepetal, Waibstadt, Göppingen, Gelsenkirchen ===== Assembly work, small batch production, forming applications, vulcanizing, hot pressing Hydraulic press, hydraulic press, double-column press, H-frame press, assembly press, small batch press, vulcanizing press, heated platen press, industrial press Are you looking for a hydraulic press customized for your application? Contact us for a tailored offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC regulations, and EU safety standards. Additionally, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian occupational safety standard NR 12, which builds upon these regulations. Our core strengths are special machine engineering and press automation. We offer custom-built hydraulic presses at surprisingly attractive prices. The hydraulic systems primarily use components from leading European manufacturers.

Condition: used, Year of construction: 1996, machine/vehicle number: 7037, equipped with an ABB IRB6400F removal robot, year of manufacture: 1997, serial number: 1318, inventory number: 073005700, WOLLIN spray unit, casting automation, control system, touch panel, cooling tank, machine platform, belt conveyor, 1 ABB industrial robot as a spare parts dispenser. Itodpfxszhax Tj Ad Iol

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Iodpfozil S Iex Ad Ijtl Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Condition: excellent (used), Year of construction: 2019, HSM V Press 1160 plus Pressing force 532 kN, opening width 1,195 m, opening height 0.65 m, drive power 4 kW, press type BP, dead weight 2.43 t, transport length 1.78 m, transport width 1.568 m, transport height 2.995 m, press type baler. Iodpfx Adjl Uvuks Istl Press immediately ready for use.

Condition: used, Year of construction: 1992, machine/vehicle number: 6597, Revision status: 2005, clamping force: 320 tons, melting and holding furnace DOGUS MACHINE EMHF-300/45, year of manufacture: 2020, heating capacity: 45 kW, diameter: 1,320 mm, height: 1,500 mm, casting automation, spray device WOLLIN LSC1, year of manufacture: 2014, serial number: 1009. Isdpfx Adszhayke Istl

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic CNC press, 100 tons (1,000 kN) pressing force Siemens SPS1200 series 10" Beijer display Stroke 400 mm Isdpjnp Ndhjfx Ad Iotl Table size 790 mm x 600 mm Feed speed 110 mm Return speed 140 mm Sick light curtain Remote maintenance module installed Rexroth hydraulics with cooler Modifications can be implemented upon request Upon request, the manufacturer can supply C-shaped frames for presses with a pressing force of 10 tons to 400 tons and variable dimensions.

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Itodpslyr Adjfx Ad Iel

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Itodpfx Ajumk Najd Ijl Type: HES16MP General: Display: 0-400kp/cm2 / 0-25Mp

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: MP2506992, input voltage: 400 V, total width: 960 mm, total length: 1,060 mm, total height: 2,250 mm, pressure: 200 bar, overall weight: 675 kg, stroke length: 200 mm, control voltage: 24 V, input frequency: 50 Hz, power: 2.2 kW (2.99 HP), pressing force: 6 t, Hydraulic Clinch Press Miller MP645E, with optional vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-57KN (6 ton) Throath depth 450mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2250mm x W 960mm x D 1060mm Weight ca. 675 Kg Electrical connection 400V, 2.2 KW  Berghof PLC control system  In-house programming  Automatic press force adjustment with counter; position-based  Memory for up to 1,000 parameter sets and 200 programs  Electronic and mechanical safety system with distance monitoring  Safety electronics by MURR & EATON  Safe processing of conductive and non-conductive materials  Linear length measurement system  Electronic (indirect) press force measurement  Proportional valves for electronic press force control  Peripherals and digital I/O by Beckhoff  Made in Germany; in-house service support Itsdpsztcykefx Ad Isl Optional  Tooling set with 14 or 33 punches and dies  4-station die holder with position sensor; parameters for each of the 4 stations can be selected individually and stored in the program  Vibratory feeder for automatic transport of press-fit elements  Singulation and feed unit for automatic processing of clinch fasteners  Length measurement of automatically fed press-fit studs or bushings  Force/displacement diagram displaying the most recent press-fit data  Custom requirements—such as program selection via barcode scanning, production data output, etc.—can be programmed in-house  Adaptation to handling systems or robots possible; communication via PROFIBUS, PROFINET, EtherCAT, or Modbus We are happy to answer any questions you may have; on-site visits are possible by appointment. Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW Itjdpfx Adeuild Ae Ijl weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: good (used), Year of construction: 1970, Offer 25020 Technical data: Iodpovnmblefx Ad Ijtl - Pressure force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Hole in the table approx. 320 x 220 mm - Ram surface 940 x 400 mm - Ram adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Condition: ready for operation (used), Year of construction: 1962, Eccentric press with black shield, Pressure capacity 15 t, Stroke adjustment from 5 - 60 mm, Table dimensions: 550 x 360 Dimensions: W 800 x D 1200 x H 2200 mm Itodpfou Rrrfsx Ad Iel Weight 800 kg,

Condition: used, functionality: unexamined, Hydraulic double-column deep-drawing press with a draw cushion. Modified in 2002 by neff Pressen, Karlsruhe, according to VBG 7n5.2. Modification No. 55377, modification date 10/2002. Isdpfx Adez A Uncs Ietl Ram and table with T-slots, table with ejector bores for the draw cushion. Roller conveyor in front of the press area, light curtain on the operator side, pendant control unit with emergency stop for the ram and draw cushion. Hydraulic unit with control panel: pressure setting and manometer for the ram and draw cushion, pressure stage valves; separate control cabinet with operating panel. After-travel distance 12 mm, after-travel time 147 ms, minimum distance of the light curtain to the tool hazard area 294 mm. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; disassembly and loading upon agreement. All information without guarantee.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MP2510892, input voltage: 400 V, Hydraulic Clinch Press Miller MP645E, with vibration conveyor and automatic feeding tool for the installation of self-clinching studs, nuts, stand offs and other fasteners. Technical data: Press force 2-97KN (10 ton) Throath depth 650mm Zylinder stroke 200mm Travel speed 110mm/sec. Cycle time 3sec. 1200/hour Size H 2140mm x W 1070mm x D 1550mm Itsdpfx Aoirnaqed Iel Weight ca. 1500 Kg Electrical connection 400V, 3.0 KW Guaranteed, lasting reliability through the use of high-quality components Simple handling and short changeover times Low maintenance and service requirements Very flexible due to the large number of possible applications Automatic feeding system, touch screen control etc. optional available Energy-saving, solid design with the energy efficiency of a hydraulic system Electronic and mechanical safety system for 100% safe processing of conductive and non-conductive materials Connection to the usual power supply (400V) Processing of all common press-in elements thanks to high press-in force, press-in nuts up to M12, threaded bushes up to M10, threaded bolts up to M8 Continuous adjustment of the press-in force, repeatability +/-1%

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Machine type: Punching press Year of manufacture: 1994 Itodpfx Ajy Ndyaed Iel Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 530001846, pressing force: 70 t, filling opening width: 1,020 mm, filling opening length: 900 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 600 kg, total width: 2,060 mm, total height: 2,394 mm, total length: 5,992 mm, type of input current: three-phase, input voltage: 400 V, input current: 19 A, overall weight: 7,500 kg, warranty duration: 3 months, noise level: 70 dB, pressure: 58 bar, transport height: 2,400 mm, pressure (max.): 70 bar, opening width: 1,020 mm, empty load weight: 7,500 kg, year of last overhaul: 2026, volume flow: 43 m³/h, operating pressure: 70 bar, transport width: 2,066 mm, transport length: 5,992 mm, protection type (IP code): IP54, input frequency: 50 Hz, tank capacity: 123 l, stroke length: 1,500 mm, Equipment: documentation/manual, FOR SALE: HSM HL 7009 Li hydraulic baling press Manufacturer: HSM Pressen GmbH, Germany Single-chamber horizontal baling press for waste, used Suitable for compacting/baling paper, plastics, PET bottles, municipal waste, etc. In the case of paper, suitable for logistical packaging for paper mills = waste valorization Pressing force: 70 tons (compaction ratio approx. 6:1) Motor: 11 kW, 3x400 V Overall dimensions of the machine/press: 580 × 290 × 300 cm (L × W × H) Bale dimensions: 120 × 110 × 110 cm (L × W × H), 1.5 m3, 650 kg, 1 bale = 1 pallet Bales can be stacked on top of each other Automatic bale ejection system onto pallets Easy bale tying with 4 strands of iron wire Machine/press weight: 7400 kg Year of manufacture: 2017 Itedjzmu Umjpfx Ad Isl Both left-hand and right-hand models are available for optimal placement in the facility. The machine has been inspected and serviced, is leak-free, regularly maintained, and ready for use. 3-month warranty. Invoice provided, price excludes VAT. Transport: - Loading included in the price - Personal collection at Moravec 41, Žďár nad Sázavou district - Alternatively, truck transport can be arranged.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 200 t, table width: 2,000 mm, table length: 1,000 mm, total length: 1,900 mm, total width: 3,400 mm, total height: 4,600 mm, overall weight: 26,000 kg, die cushion stroke: 300 mm, with 60-ton draw cushion Herblitz feed: Max. material width: 550 mm Max. material thickness: 6 mm Itodoyv A Ipspfx Ad Iol Siemens control SPS7, 1500F

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Itodpfx Adoywztao Isl Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Including tools

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Itsdpfx Adsywztge Ijl Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector Itsdpfx Adetycdks Ijl - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: used, Industrial Hydraulic Press, Hydraulic press, 100t press, C-frame hydraulic press, HYDRAP PRESSEN HPS ZB 100, Used machine Manufacturer: HYDRAP PRESSEN GmbH (Plüderhausen, Germany) – Premium manufacturer of industrial press machinery Type: HPS ZB 100 Serial number (Fabrik-Nr.): 6535 Year of manufacture (Baujahr): 1991 Weight: 14 700 kg Condition: Used, heavy-duty industrial design Technical and operating parameters: Permissible load / Pressing force (Zul. Belastg.): 1000 kN (approx. 100 tons capacity) Effective stroke (Nutzhub): 300 mm Iedpfszk Amrsx Ad Istl Drive type (Antriebsart): Hydraulic (HYDR.) Supply voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Type of current (Stromart): D (Three-phase AC / Delta configuration) Drive power (Antr.-Leistg.): 45 kW Rated current (Nennstrom): 90 A Oil viscosity (Öl-Viskos.): HLP 46 Oil capacity (Ölmenge): 780 liters Stopping distance (Nachlaufweg): 34 mm Stopping time (Nachlaufzeit): 112 ms Safety distance (Sicherheitsabstand): 192 mm