Used Sack & Kiesselbach Vsp 50/30 for sale (50,537)

Condition: excellent (used), Year of construction: 2015, With a focus on optimized and energy-efficient drives in the automotive industry, significantly higher demands are placed on the components of the drive system. Higher power transmission, higher torques, and a smaller overall size are the challenges. This development has led to an increased need for cold-formed splines. With the vertical spline press (VSP), Sack & Kiesselbach provides customers with a solution that offers technological and logistical advantages compared to conventional technologies (such as rolling or broaching). The relatively small and very user-friendly press can be configured for both manual and automated operation. In addition to the spline press, the customer can also obtain the appropriate tooling system and the corresponding process technology from a single source. 1 used vertical spline press Manufacturer: Sack & Kiesselbach Type: VSP 50/30 Year of manufacture: 2015 Technical data: Hsdpfx Amsgtty Ts Tor Press force: 500 kN Ram stroke: 450 mm Closing speed: 200 mm/s Pressing speed: 5.5 mm/s Opening speed: 120 mm/s Table dimensions: 500 x 400 mm Installation height: 1000 mm Distance between columns: 530 mm Spline cylinder speed: 3-9.5 mm/s Dimensions: Height: 2900 mm Width: 3100 mm Depth: 1400 mm Drive power: 8 kW Special equipment: Digital position measuring system Spline tool for internal gearing

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. daylight: max. 480 mm width: 585 mm stroke: max. 355 mm Hedpfx Amswuutbe Ter weight: 9.000 Kg. Note: the press is been partly reconditioned by SACK & KIESSELBACH and the control system is been repalced.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. Hsdsyylhaopfx Am Ter daylight: 320 mm width: 420 mm stroke: max. 310 mm weight: 3.700 Kg.

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, press power: max. 630 to. daylight: max. 375 mm stroke: max. 275 mm weight: 4.500 Kg. Hjdpfx Asgwv S Usm Tsr

Condition: excellent (used), Year of construction: 1983, pressure 630 t diameter 320 mm Hedpfx Aoxvdr Hjm Ter stroke 310 mm weight of the machine ca. 3500 t

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Hedpfx Amowxw Amo Tsr Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW Hsdpfjul U Svox Am Tjr

Condition: used, Year of construction: 1952, Type of machine: Down-stroking press Manufacturer: SACK&KIESSELBACH Model: EP500 Year of construction: 1952 Pressing force: 500 t Clear gap: 450 mm Hjdswxw H Eopfx Am Tsr Location: In Germany

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: M42L/8940, Offer Number: M42L/8940 Machinetype: hobbing press Make: SACK & KIESSELBACH Type: 1000 Constr. year: 1955 press power: 1000 to clear width: 585 mm daylight: 410 mm stroke: 380 mm Hsdpfowi Tdbox Am Tor table size: 0/ 700 mm Location: In our warehouse

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Hsdjhtaaqjpfx Am Ter Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Working speed in mm/sec.: 18 - 40

Year of construction: 2001, condition: excellent (used), Used hydraulic press SACK & KIESSELBACH TRP 200. The originally automatic transfer press was converted to manual in 2012, but can be converted again as an automatic press. The press is still set up and under power and is in very good condition. Pressing capacity in t: 200 Quantity of oil in l: 1100 Stroke in mm: 300 Table size (lxb) in mm: 600 x 600 Daylight in mm: 1000 Upper ejector stroke in mm: 25 Upper ejector force in t: 10 Total weight in kg: 12000 Operating pressure in bar: 6 Approach speed in mm/sec: 375 Hodpfx Amjhfwqzs Tjr Working speed in mm/sec.: 18 - 40

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Hedpfeh D If Hsx Am Ter Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: excellent (used), Air filter -Type: SMF 30/50 Hedpfeb A R E Ejx Am Ter -Diameter: Ø 81 mm -Dimensions: 780/140/140 mm -Weight: 2.3 kg

Condition: good (used), Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear -Gearbox: Angle gearbox -Translation: 31 : 1 -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm Hedpfx Amsy D I Hyj Ter -Dimensions: 280/270/H210 mm -Weight: 24.5 kg

Condition: good (used), geared motor electric motor Hsdpfx Ameb A Sgne Ter -Speed: 30/50 rpm -Power: 0.22/0.9 kW -Design: B3 angle -Shaft diameter: Ø 38 mm -Protection class: IP 65 -Dimensions: 760/250/H400 mm -Weight: 65 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, stopper cylinders -Manufacturer: Parker, stopper cylinder -Type: STVD-50-30-STD Hjdpfefm A Uqjx Am Tsr -Stroke: 25 mm -Piston: Ø 50 mm -Piston rod: Ø 32 mm -Dimensions: 185/112/H95 mm -Weight: 1.80 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 30 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 15 pieces -Dimensions: 107/68/H689 mm Hsdpofbclzefx Am Tjr -Weight: 0.8 kg/piece

Condition: good (used), Included in the scope of delivery: 1x bracket for push-through lock, used Material color: Sendzimir galvanized Manufacturer: SLP Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Hsdjipuggspfx Am Tor Opening dimension: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight/piece: 0.930 kg

Condition: good (used), Technical data for the clamping foot: Manufacturer: META Type: META CLIP Hsdpfx Aernqmism Tor The scope of delivery includes: 04x clamping foot, used suitable: for upright profile 50 x 30 mm Material color: sendzimir galvanized Total width: approx. 75 mm Total depth: approx. 57 mm Material thickness: approx. 2 mm Weight | pc. approx. 0.060 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 01x rectangular tube, used profile dim.: approx. 50 x 30 mm Material color: orange total length: approx. 3.660 mm center-center-hole: approx. 3.630 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill hole Ø: approx. 10 mm Hjdpfendiqdjx Am Tsr Weight / pc.: 6,150 Kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), Various standard and powered tool holders in different designs for VDI 20, 30, 40, 50, and 60. Please specify the VDI size you require when submitting your inquiry! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Hedpfxsbql T Ej Am Tjr

Condition: like new (used), type: HZO 50/30/600/D/GL Hsdpjyxnwuefx Am Ter piston diameter: 50mm piston rod diameter: 30mm stroke: 600mm perm. pressure: 103 bar

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 7 / 8939 / 05 / 21, Used Reifenhäuser extruder Type: RH-241-1-50-30 WE DC-motor with 37 kW capacity screw dimensions : diameter 50 mm – 30 L/D Grooved feeding zone With manual screen changer Fully functional You are welcome for inspection this (and further) extruders in our warehouse Königswinter The machine can be switched on and demonstrated when empty. Hsdpfxjw Np Tks Am Ter The screw has been removed and cleaned.

Condition: used, machine/vehicle number: 12659, Rotor diameter: 300 mm Rotor width: 500 mm 3-knife rotor 2 rows of stator knives Hjdoyr Tqropfx Am Tsr Infeed opening approx. 500 x 490 mm Drive motor: 22 kW

Condition: excellent (used), Milling and grinding machine Make: Brand Hodpjxmgcvefx Am Tor Type: SP 50 SEO 30 / KS Year of manufacture: 1997 Belt sanding unit KS 30 Belt width: 120 mm Belt length: 2100 mm Belt speed: 14 m/s Profile sanding unit DS 40 0.75 kW 1000 rpm Spindle stub diameter: 30 x 100 mm