Hobbing press

SACK & KIESSELBACH 1000

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: Gkedpfx Ajpy Eldjb Ujf - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Gedpfx Abeh Ha Ipj Uokf Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: used, HYDRAULIC DOUBLE COLUMN PRESS CAMP 250 tn Double column press Pressing power 250 tn Stroke of the piston 500 mm Table size 570 x 570 mm Distance from table to piston 600 mm Distance between uprights 570 mm Approach speed 95 mm/seg Workin speed 7.5 mm/seg Gedjgr Ur Ropfx Ab Uokf Retraction speed 135 mm/ seg Engine power 30 cv

Condition: good (used), Center height: 205 mm Center distance: 1500 mm Swing diameter: over bed 410 mm Spindle bore: 47 mm Spindle mount: size 6 Tailstock taper: 4 MK Gkjdpfxev Du Ixe Ab Usf Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/transverse 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space required: 2800 x 1100 x 1600 mm Weight: 1330 kg

Condition: used, turning diameter over bed 260 mm turning diameter over slide rest 140 mm turning length 500 mm centre height 125 mm bed width 160 mm spindle turning speed range 16: 110-3600 U/min spindle bore 28 mm face slide travel 120 mm upper slide-adjustment 120 mm Godsvtthiepfx Ab Uekf tailstock quill taper MT 2 tailstock quill adjustment 80 mm drive motor 0,37 / 0,88 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1,3 x 0,6 x 1,2 m Mechanic's lathe with manual feed and spindle support, drive via V-belt and stepped pulleys as well as 2-pole motor, hardened, finely ground work spindle, support adjustment over the entire bed length using eccentric clamping lever, three-jaw chuck, collet device with pliers, crank tailstock, cast base. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Gjdpfxeg Ufvbo Ab Uokf Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Froehling Head Froehling is a very renowned brand for its reliability and robustness in the field of Rolling Mills, this 4-stage rolling mill allows precise and fast milling. Below are the features: Manufacture: - FROEHLING (Germany) - New 1969 - Upgrades 1984 and 2004 Godpfxjg Ryqkj Ab Uokf Material: - Aluminum alloys - copper - brass - low carbon steel Strip Width: - 282 (300) mm / 11.1" (11.8") Strip Thickness: - 0.15 - 1.20 mm commonly processed - 2.00 mm max thickness Coil Size: - ID - 400 mm (15.75") - OD - 1500 mm (59") Mill Speed: - 400 m/min (1312 fpm) Work Rolls: - Diameter - 130 mm (5.12") - Face - 340 mm (13.4") Back/up Rolls: - Diameter - 390 mm (5.12") - Face - 335 mm (13.4") Drive: - 250 kW ABB DC motors / converters - New 2004 Controls: - ABB PLC - Vollmer Automatic Gauge Control - Hydraulic AGC System - Bending system Completed with: - Uncoiler - Recoiler - Belt wrapper - unloading car - Hydraulic power units - Electrical control cabinets (2002) Many sets of work rollers and backup rollers as spare We have all electrical and mechanical drawings, Software key and everything needed to reassemble and restore the function of this machine. It was dismantled after have worked until last day. If you have any questions, please let us know Sold EXW dismantled and loaded on truck. Ready for any inspection from any customer interested in. SEND US YOUR PROPOSAL IF YOU ARE INTERESTED ON THIS MACHINE, WE WILL DO OUR BEST TO HAVE A GOOD BUSINNES TOGETHER.

Condition: excellent (used), Between centres – 1000 mm Centre height – 311 mm Max swing over bed – 660 mm Max swing over cross slide – 618 mm Max swing in gap – 690 mm Gsdpfexcpbaex Ab Ujkf Bed width – 384 mm Spindle bore – 52 mm Spindle speed – 18 speeds from 32 to 1600 rpm Carriage travel – 156 mm Tailstock quill diameter – 82 mm Tailstock quill travel – 120 mm Machine weight – 2150 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Gjdpjf S I I Hofx Ab Uekf Inside diam of spool: 240 - 560 mm Hight of spool: max. 180 mm

Condition: good (used), Year of construction: 1980, Donewell press brake Type: 80-2500 Control: Cybelec CP 9220 Pressing force: 80 T Working width: 2540 mm Year of construction: 1980 Dimensions: 255x130x265 cm LxWxH Gkodpfx Aoqgcqieb Ujf Weight: approx 6300 KG