Used Sba Etk 168-0110 for sale (636)

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: SBA, transformer type ETK 168-0110 -Power: 1840/4340VA -Technical data: see type plate -Dimensions: 175/165/H150 mm Iisdpsh Hrtyjfx Afhsg -Weight: 20.3 kg

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. Ijdpfxoy An I Is Afhjig 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high.

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Iisdozz Iq Ropfx Afheg

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Bosch high-voltage inverter Iedpfxozl H Hxs Afhjig Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: excellent (used), Year of construction: 2013, Perfecta 168TS BASA fully automated cutting system year 2013 consisting of Perfecta 168TS cutting machine BASA 7 automatic jogger with automatic paper feeder ZTS 2000 paper pile loader for the rear table of the cutting machine Iodpfx Ajzqtpdofhoig BA6 unloader very little use very good condition located in Germany testing possible

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, KASTO bandsaw model SBA 320/500 AU DG in good working condition. Cutting capacity at 90°: approx. 320 mm, square 500 x 300 mm Cutting capacity at +45°: 320 mm, square 340 x 300 mm Cutting capacity at -45°: 320 mm, square 360 x 300 mm Cutting capacity at +60°: approx. 220 mm, square 200 x 200 mm Cutting capacity at -60°: approx. 250 mm, square 240 x 240 mm Max. vice opening: 510 mm Iodpfxoyi Unao Afhsig Saw band dimensions: 5090 x 34 x 1.1 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 280 mm, cutting width (max.): 280 mm, total height: 1,590 mm, total length: 2,680 mm, total width: 2,540 mm, overall weight: 1,750 kg, Equipment: chip conveyor, rotational speed infinitely variable, The KASTO SBA 280 AU is a powerful horizontal bandsaw automation system for the precise and economical cutting of solid and profile materials in general mechanical engineering as well as in series and single-item production. With a cutting diameter of up to 280 mm and a cutting range of 280 x 280 mm at 90°, the machine is particularly suitable for the reliable cutting of various materials and cross-sections. The robust design in combination with a continuously adjustable cutting speed of 17 – 90 m/min enables optimal adaptation to the respective material and ensures clean, dimensionally accurate cutting results. The feed unit allows feed lengths of 600 mm (single) or up to 5400 mm (multiple) – for an efficient, largely automated material flow with minimal scrap length from 30 mm. The core of the system is the proven KASTO Compact Control, which offers intuitive operation, simple programming of cutting lengths and quantities, and a high level of process reliability in automatic operation. The integrated coolant system ensures optimal cutting conditions and a long service life of the saw blade, while the chip conveyor ensures clean and trouble-free chip removal. With a compact footprint of approximately 2.68 x 2.54 x 1.59 m and a machine weight of approximately 1.75 t, the SBA 280 AU offers high stability and smooth running, which has a positive effect on cutting quality and service life. Overall, it is a reliable and versatile bandsaw automation system that combines precision, performance and economy in industrial production. --- Optional Accessories A conveyor belt in lengths of 310 cm and 420 cm can be purchased separately to match the machine – for an optimized material flow and comfortable handling of the cut material. Iedezk Hacspfx Afhoig --- You are welcome to inspect the machine in our factory while it is running. If you are interested, we will gladly send you demonstration videos of the machine. Upon request, we offer delivery and commissioning of the machine as a comprehensive, all-inclusive package. You are in the best hands with us – professional, reliable and with a passion for machines! PS CNC Service Germany GmbH & Co. KG

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Iodsufcnqspfx Afhjig Motor 1, 1 kW

Condition: used, Year of construction: 2009, cutting diameter 360 mm Iijdjzyyyzopfx Afhog saw band length 4870 x 41 x 1,3 mm cutting width 360 mm cutting speed 11 - 110 m/min 4,0 kW height of the workpiece 800 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,9 x 2,2 m Automatic hydraulic band saw with - SIMATIC OP17 NC control - Single material feed 600 mm - Max. programmable length 6000 mm - Hydraulic saw blade tensioning (36–40 bar) - Motorized chip conveyor - Emergency stop device - infeed roller conveyor 4m

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left. Isdpfjzudu Sex Afheig

Condition: used, Year of construction: 2018, Overview  This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data - Capacity: up to 25,000 bph Scope of Delivery  Iijdswhw Sgspfx Afhjg - Fill level and closure inspection system | KHS - Label inspection system | Indspect

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds Iijdpsz Agv Uefx Afhsg - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds Iisdpoz Ag Rrofx Afhog - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. Iedpfx Aoz Agw Eofhsig - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity Iodszz Rpcepfx Afheig - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: good (used), Year of construction: 2013, functionality: fully functional, arm reach: 1,611 mm, For sale is a Kuka industrial robot, model KR 16-2. - 1x pedestal for the robot, height approximately 30cm - 1x KRC4 control cabinet - 1x KCP4 operator panel, 00-168-334 - Connection cables Iijdpfezzacljx Afheg - Shipping is possible for an additional charge.

Year of construction: 2006, condition: used, Rotox bar processing automaton type SBA 485 Isdpfx Asyliq Ujfhoig

Condition: used, functionality: unexamined, Ferwood Code: RU0008193 - Manufacturer Code: MDX61B-0110-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - If interested, we offer an overhaul service, please contact us. Iijdpfx Aozmhxfsfhjg

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Iiedpfx Afjvtpp Njheg Specifications: - Type of saw : Friction - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 - Max. speed : 120 m/min - Length tolerance : +/-2 mm Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Material thickness: 1 – 6 mm Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Condition: used, This listing is for the Sartorius Tare ENTRIS2202-1S Balance The unit is in full working condition and is ready for immediate use The Sartorius ENTRIS2202‑1S (also referred to as ENTRIS 2202‑1SUS in some regions) is a precision top-loading laboratory balance designed for reliable, accurate weighing of samples up to approximately 2,200 g with 0.01 g readability. Key Specifications: Iodpfx Aexhfffefhoig Capacity: 2,200 g Readability (Resolution): 0.01 g (10 mg) Repeatability: Typically 0.01 g Linearity: Approximately 0.03 g Weighing Pan Size: Around 182 mm × 182 mm (7.1″ × 7.1″) Calibration Type: External calibration (requires separate calibration weight) Display: Backlit, high-contrast screen for clear visibility Interface Options: RS‑232 port for communication with PCs or printers Built-In Functions: Includes modes for basic weighing, counting, percent weighing, animal weighing, and density determination Language Support: Multiple languages supported such as English, French, German, Italian, Polish, Russian, Spanish Other Features: Anti-theft locking capability, easy-to-clean removable pan and draft shield Stabilization Time: Approximately 1.5 seconds Dimensions & Build: Compact size, robust design ideal for lab environments

Condition: ready for operation (used), Year of construction: 2004, Features: Rondamat 168 is extremely easy to use and highly versatile. The machine sharpens planing knives, milling tools, and circular saw blades using straight grinding wheels. Iiodpfxeh Txfde Afheg Shaft diameter: 40 mm Wet grinding Maximum tool diameter: 350 mm Disc diameter: 150 mm Maximum tool length: 240 mm Minimum tooth pitch: 32 mm Maximum tooth pitch: 20 mm Main motor power: 1.1 kW Total power consumption: 1.5 kW

Condition: used, maximum load weight: 7,400 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 07/2000, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 400 mm, Year of construction: 2000, Equipment: ABS, Stock No. 5884 Approx. 5.00m Müller-Mitteltal 2-sided tandem tipping trailer with folding ramps ----* Manufacturer: Müller-Mitteltal * Type: ETK-TA-S * First registration: 07/2000 * Gross vehicle weight: 11,000 kg * Unladen weight according to vehicle registration document: 3,600 kg * Payload: 7,400 kg * Axles: 2 x BPW / drum brakes * Suspension: leaf spring suspension * Tires: 235/75 R 17.5 approx. 50% remaining * Color: Chassis grey, tipping body red * ABS * Internal dimensions of tipping body: approx. 5.00m long x 2.42m wide, side walls 0.40m high Ijdpfx Afsz A Nwfshjig * Mechanical, 2-part ramps (2.10m + 1.30m = 3.40m) * Steel floor with 4 pairs of folding lashing eyes * 40 mm drawbar, height-adjustable * Quarter fenders, 2nd axle * Spare wheel holder * LED reversing lights * 2 x LED work lights, front * Full-load support, front * Additional supports, rear German trailer!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: excellent (used), Year of construction: 2016, 538 USED Wachtel Compact rotary trolley oven. Oven for 60x80 or 58x78 baking trays. EXTERNAL DIMENSIONS (in cm): - W: 159 - L: 168 - H: 265 EQUIPMENT: - gas burner Iiodozz S H Ajpfx Afhog TECHNICAL DATA: - year of production: 2016 The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 2018, machine/vehicle number: 10619-1, MEYPACK VP 451 tray and wrap-around packaging machine Fully automatic machine for packing beverage cans into trays and wrap-around cartons. Products and formats: - 0.33-litre cans, Ø 66 x 115 mm, loose and in four-packs - 0.5-litre cans, Ø 66 x 168 mm, loose and in four-packs Pack configurations for both can formats: - 4 x 6 loose cans in a wrap-around carton or tray - 3 x 4 loose cans in a wrap-around carton - 2 x 3 four-packs in a tray Output: - Nominal output: 16,000 cans/h - Packaging output: 12 or 24 packs/min, including a 5% capacity reserve Product handling: - Multi-lane bulk product infeed - Four-packs fed transversely on two lanes, with the openings facing sideways - Infeed height: approx. 1,150 mm ± 50 mm - Outfeed height: approx. 650 mm ± 50 mm - Trays and wrap-around cartons leave the machine broad side leading Operating principle: The products are fed continuously in multiple rows, distributed evenly into the lanes of the infeed conveyor using the accumulation principle, and grouped into the required formation. At the same time, a flat tray or wrap-around blank is removed from the magazine and positioned below the grouping station. The servo-driven lowering station receives the product formation and blank and folds the blank tightly around the products. A servo-driven indexing chain then conveys the pre-folded pack through the gluing and compression stations. The finished pack is transferred to the downstream conveyor system via a gravity roller conveyor. Grouped-pack size range: - Length: 200–400 mm - Width: 120–300 mm - Height: 80–200 mm - Tray height: 40–200 mm Packaging material and magazine: - Suitable for almost all commercially available corrugated-board grades; final design subject to approval by MEYPACK - Blank length: 360–1,250 mm - Blank width: 300–700 mm - Magazine capacity: approx. 150 blanks or approx. 400 mm stack height for B-flute board - Flat blanks are separated by vacuum cups and positioned by a belt conveyor - Hot-melt adhesive: commercially available grades approved by the adhesive-unit manufacturer; final design subject to approval by MEYPACK Utilities: - Electrical supply: 3 x 400 V AC, 50 Hz, with neutral and protective conductor; permissible long-term voltage fluctuation ± 5% - Control voltage: 24 V DC - Compressed air: 6 bar, 1/2-inch connection; clean and free from foreign matter, gases and oils Operation and format change: - The machine can be monitored by one operator while performing another task - Operator side can be arranged on the right or left when viewed in the outfeed direction - Fast, repeatable format changes through zero-line design and automatic indexing-chain adjustment - Settings documented in product-specific format lists; clearly assigned and marked change parts Basic machine and components: - Weight: approx. 3,500 kg - Finish: black grey RAL 7021 - Pneumatics: Festo - Hot-melt unit: Nordson Pro Blue - Drives: SEW, protection class IP55 - Control system: Siemens S7 - Operator interface: Siemens Touch Panel TP 1500 - Electrical design in accordance with MEYPACK standard electrical equipment specification E 2017 Included options: - Additional tray takeaway conveyor for manual palletising - Painted-steel roller conveyor with integrated corner transfer, nominal width 350 mm, length approx. 1,100 mm - Two-lane transfer unit with modular belt chain, adjustable side guides on one side and stainless-steel cable duct - Broadband VPN router for remote machine maintenance - Swivel arm for Ijdpfxez Abkys Afhsig

Condition: new, Manufacturer: SBA TrafoTech GmbH Type: DS-UL-G140 Device type: Three-phase autotransformer Iiodpszcgy Ijfx Afheg Frequency: 50–60 Hz Protection class: I Degree of protection: IP23 Insulation class: B/F Maximum ambient temperature: 40 °C Design: UL-compliant transformer series DS-UL-G140