Paper cutting machine

Perfecta 168 TS

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Hjdpfezz Iq Rjx Al Aeu

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, polishing units. Hsdpfxezkmqze Al Aeu Additional equipment: HOMAG XES 200 service station.

Condition: good (used), Polar Mohr 115 XT Plus Paper Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Hodpfx Aljzw T Dne Aeu Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: used, Year of construction: 2011, Sewing machine Meccanotecnica Universe Hjdpfex Sybfjx Al Asu Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: used, Three Knife Trimmer with automatic infeed belt for Inline or Offline production Hodpjx Swm Eefx Al Aju Dreimesserautomat / Three Knife Trimmer Wohlenberg 44 FM 50 Baujahr / Year 1988 - Serial-No. 3296-013 Format / Size max.  315 x 440mm  Thicknes max. 100mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2615 laser hours 2400 dpi Z-speed Hjdpoytawnjfx Al Aeu Total number of exposed printing plates: 395,443 pieces Minimum size: 483 x 394 mm Maximum size: 1600 x 2108 mm Material flow from left to right, Print Console enabled for all RIP software, Dell PowerEdge T330 server.

Condition: excellent (used), machine/vehicle number: 61 988, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Hsdpfep H Tkiox Al Aou

Condition: good (used), Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Hjdjzw T A Ropfx Al Aou Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Hjdetyyvwspfx Al Aou Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: like new (used), 4,000 m² Schäfer R3000 two-story storage platform Used, in top condition, like new, see pictures Manufacturer: SCHÄFER R3000 CAD planning and assembly Price on request! Partial sale possible Negotiable price: on request! Goods are in stock and readily available Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex warehouse) Lenox Trading – Top storage technology & used & new heavy-duty racking Description: Hsdpfxofiqhds Al Aou Are you looking for high-quality storage racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking available for immediate delivery • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer truckloads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking, or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATIONS: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete, all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling, and handover in a clean condition. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems, we guarantee the best conditions. Contact us for a non-binding offer!