Used Schlatter Seam Welding Machine for sale (65,551)

Condition: good (used), Year of construction: 1985, Offer 25252 Technical Data: Bodpfoy H A Tyox Al Islg - 3 workpiece holding plates 220 mm - 1 driven holding plate - Infinitely variable rotational speed - Clockwise and counterclockwise operation - Adjustable welding time - Hose package - Drive: 400 V - Space requirement approx. W 2400 x H 2000 x D 1300 mm - Weight approx. 600 kg

Condition: used, Welding edge shaper, edge shaper, edge chamfering machine TRUMPF Chamfering of steel plates for weld seam preparation Type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10 mm Bevel angle: 30° Blededz Sq Ejpfx Al Ijg Power: 2000 watts Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30° bevel angle - resharpenable steel for high tool utilization - Set up for 20 mm sheet metal For chamfering straight and curved edges with a radius of at least 40 mm. For chamfering edges on flat and curved workpieces as well as pipes with an internal diameter of at least 80 mm. Weight: 14 kg

Year of construction: 2018, condition: ready for operation (used), Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible. Bledpfxou Izq Ss Al Ijg

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Bodpsu Nkxhofx Al Islg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: refurbished (used), DALEX roller seam welding machine, cross seam version Projection: 350 mm Nominal power: 160 kVA Sec. short circuit current: 38.5 kA Sec. no-load voltage: 4.8-9.6 V Electrode force: 140-2,040 daN Bodpfx Aledx Suhe Islg with 2-step switch and auxiliary control with thyristor power stage and Synchronous welding control MPS 100 multi SPECIAL NOTE - PLEASE NOTE The above performance data are taken from the machine's rating plate. When the machine was inspected, it was found that a 200 kVA welding transformer was installed by the previous owner. This changes the performance data. .

Condition: excellent (used), Roller seam welding machine in longitudinal seam design Make DALEX Type PMS 11-4 Nl throat depth: 350 mm Rated power at 50 % duty cycle: 80 kVA Bjdpstxl Ivsfx Al Islg Sec. short-circuit current: 23 kA sec. open-circuit voltage: 3.5 - 4.26 V with 2-step switch (high/low range) Electrode force: 80-600 daN with add-on switch cabinet according to VDE 0100 Main switch Synchronous welding control unit 8036 Weight: 635 kg Example photo Machine is still being refurbished

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, type of cooling: water, overall weight: 4,000 kg, working width: 1,000 mm, Schlatter NQD - Cross seam welding machine - Overhauled We offer here a completely overhauled Schlatter NQD cross seam welding machine. The delivery time of the machine is approx. 4 months. Welding heads: 4 pieces Bsdpfou Tqhhox Al Ijlg Travel distance: 950mm Welding speed: up to 12 meters / minute The machine is only for sale as reconditioned / as good as new. With kind regards T. Becker

Condition: used, Year of construction: 1971, nominal power at 50% duty cycle: 100 kVA, Manufacturer: Nimak Type: NMP 7/100 Year of manufacture: 1971 Machine No.: 71059 Rated power: 100 kVA at 50% duty cycle Connected load: 175 kVA Primary voltage: 380V Open-circuit voltage: 7.3V Secondary current dd/max.: 8/33 kA Electrode force: 750 kp Frequency: 50 Hz Up to 8.8 V At 6 bar Bedpfx Aow S Exujl Ijlg Please submit inquiries only by email. All information has been provided to the best of our knowledge. Errors excepted. This offer is exclusively aimed at entrepreneurs as defined in § 14 BGB. Sale is made to the exclusion of all warranties. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, as well as for injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the keywords "Imprint," "Terms and Conditions," and "Data Protection."

Condition: new, Year of construction: 2025, longitudinal and transversal seam welding machine --- Power at 50%: 80kVA Highest welding-current: 35,9kA Electrode force: 100-600daN / double stroke Throat depth: 550mm --- Weld control: Filius classic 128 program --- Extra Equipment: Bsdpfswqmrzjx Al Iolg - foot pedal - flow monitor - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 Blodpfx Aljxlr Tdj Isg rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: new, Year of construction: 2025, Technical Specifications: Bljdpfx Ajtmfzuol Ieg Model: KMD20 Operated: Motorized Pressure Input: Up to 6 bar Power: 20KVA Welding Capacity: 1.5+1.5mm mild steel Maximum Force(6 bar): 115daN Input Voltage: 380V/50Hz Protection Fuse: 63A Seam Weld Arm Length: 200mm Cooling: Water cooling (8L/min) Power Input Cable: 3m Protection Class: IP21 Power Level: %0-99 power adjustable by controller Weld Time: 1-99 Cycle adjustable by controller Dimensions (W/L/H): 450m x 1000mm x 600mm Weight: 203Kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, working range: 1,000 mm, For sale is a completely refurbished Schlatter radiator welding line consisting of: - Back-up ring unit (EBV) - 2-row multi-spot welding machine (hydraulic) - 2-row convector welding machine (pneumatic) - Longitudinal seam welding machine (NFR) - Cross-seam welding machine (NQD) - Cutting shear (TS10) - Corner cutting machine (ESV) - Transverse edge closing device (QRSV) - Transport & turning device (TVW) Blodpfx Asv Edlvel Ijg - Nipple & spacer welding system (NIAH) - Test basin (water) Control system: Siemens S7 TIA Please note that the radiator welding line is only available in a fully refurbished condition.

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm Bledpfx Aewu Tu Dsl Ijg 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm Bledpfey Iha Usx Al Ijg weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Stop skirt 1 set of rollers Forward/reverse operation via foot switch

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Bjdstkuk Rjpfx Al Ijlg

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, pulse welding system -Manufacturer: Ess, MIG/MAG welding machine -Type: Pulsarc 350 -Max. welding power: 350 A Bjdpfx Alex Hi I Do Iolg -Water-cooled -Wire feeder case: ESS DVK 400 4-roller drive -Dimensions: 970/670/H1040 mm -Weight: 209 kg

Condition: excellent (used), Power: 35 kVA Maximum welding power: 67 kVA Short-circuit current: 15.5 kA Maximum welding current for steel: 12.4 kA Welding current at 100% duty cycle: 4500 A Secondary open voltage: 5.4 V Supply voltage 50Hz*: 400 V Power cable diameter at L=30 m: 16 mm² Fuse (slow-blow): 63 A Insulation class: F Projection: 400 mm Maximum electrode force at 6 bar: 300 daN Working stroke: 5-80 mm Minimum arm opening: 280 mm Maximum arm opening: 280 mm Arm diameter: 50 mm Blsdpfjy Hr T Nex Al Iog Electrode holder diameter: 25 mm Standard electrode diameter: 14.8 mm Compressed air connection: 6.5 bar Air consumption per 1000 spot welds: 1.7 Nm³ At 20 mm working stroke at 6 bar: 5.4 Nm³ Max. inner diameter air hose: 8 mm Water cooling consumption: 4 l/min Noise level: < 70 dB(A) Net weight of the machine: 210 kg

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Bedpfx Ajy Hl Nqjl Islg Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2004, condition: excellent (used), Offered from an insolvency is a DC TIG welding machine Manufacturer Migatronic Model Pilot 2400 Year of manufacture 2004 Machine No. 04050694 Bjdpfefthy Rox Al Ijlg Technical data: 380 volts Welding range 5-240Amps Welding power: 240Amps at 35% ED 170Amps at 100% ED 2/4 beat Pulse function HF ignition additional water cooling KG 2 No.25730509 220 Volt 8meter burner package with ground cable ---- without pressure reducer-- Dimensions in mm approx. 510x370x220

Condition: not inspected (used), functionality: unexamined, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, overall weight: 150 kg, No reserve price – guaranteed sale to the highest bidder! Bodpfjy D Nqasx Al Ielg By placing a bid, you commit to collecting the items within the period from 23/06/2026 to 26/06/2026! Auction of an ELEKTRA BECKUM electrode welding machine & an oxy-fuel welding unit! MACHINE DETAILS Dimensions (L x W x H): 1,100 x 800 x 1,000 mm Weight: 150 kg Note: The gas cylinders pictured are not included in the scope of delivery. External reference: 17

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V Bsdpoy A Iftsfx Al Islg -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm Bledpfxoy Au Nfs Al Ijg -Weight: 966 kg / 70 kg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos Bsdpfx Aey Au Eyol Islg -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm Blsdpfxov Ipcfj Al Isg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Dalex, 2 coupled spot welding machines, with storage table -Type: SL 25/EA -Rated power: 25 kVA each -Projection: 600 mm -Intermediate dimension: up to 1590 mm -Operation: via foot pedal Bodpfx Ajyz Rd Asl Ielg -Individual components: see photos -Dimensions: Machine 2140/1160/H1220 mm / Table 1565/1075/1140 mm -Weight: 535 kg / 112 kg