Used Spinner Vc1160 for sale (101)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,160 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, table width: 610 mm, table length: 1,320 mm, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 7,000 kg, tool length: 200 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine was not used for mass production. Accuracy: ±0.01 mm. It has been regularly maintained, both electronically and mechanically, e.g., new ball screws were installed one year ago. Tsdpfxjy T Nggj Am Tja Equipped with an oil mist separator. It is in daily use until the end of June 2026 (and can be viewed in operation until then). Net price.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1119, travel distance X-axis: 1,100 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,100 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Spindle speed, max.: 8,000 rpm Rapid traverse rate, X/Y/Z-axis: 18 / 18 / 15 m/min Table area: 1,200 × 600 mm Workpiece weight, max.: 1,000 kg Spindle connection: ISO 40 Number of tool changer positions: 24 MACHINE DETAILS Control system: Siemens 840D SL ShopMill Coolant pressure through the spindle: 20 bar Connection power: 400 V, 50/60 Hz Current: 50 A Todpfx Amjzpw Egs Toa Dimensions & Weight Footprint: approx. 3,000 × 2,350 mm Machine weight: approx. 8,000 kg EQUIPMENT ShopMill Preparation for 4th axis

Condition: used, Year of construction: 2014, CNC machining center, horizontal Manufacturer: Spinner Type: H630-A Tedozqy I Hspfx Am Tea Year of manufacture: 2014 Control system: Fanuc 0iMD Travel ranges: X/Y/Z: 1,000 x 850 x 950 mm Milling spindle up to 10,000 rpm with “In-Line” direct drive Tool taper size 40 Air blow-out system for spindle taper 4th axis: rotary table Dual-pallet changer: 2 x 630 x 630 mm High-speed automatic tool changer 100-tool capacity Horizontal milling and drilling Multi-sided machining in conjunction with a rotary table as the 4th axis Glass scales in all axes Laser tool measurement, workpiece measuring probe RENISHAW IKZ 40 bar Splash guard High-pressure flushing system Work area light 30726

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, spindle speed (max.): 2,600 rpm, travel distance X-axis: 360 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 980 mm, spindle motor power: 22,000 W, overall weight: 7,000 kg, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A11 • Bar capacity: approx. 77 mm • Counter spindle: Yes • Counter spindle speed: up to approx. 5000 rpm • Counter spindle power: approx. 15 kW • Counter spindle spindle nose: A6 • Counter spindle bar capacity: approx. 52 mm • Tool turret type: VDI 50 Tsdpeyv Epvefx Am Tja • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2012, CNC machining center, horizontal Manufacturer: Spinner Type: H500-A Year of manufacture: 2012 Control: Fanuc Oimd Travel range: X/Y/Z: 700 x 650 x 650 mm; 36 m/min. Milling spindle 12,000 rpm with "in-line" direct drive Tool taper size 40 Air blow-out system for spindle taper 4th axis: rotary table 2-position pallet changer: 2 x 500 x 500 mm High-speed automatic tool changer as a dual-arm changer for 60 tools Horizontal milling and drilling Multi-sided machining in conjunction with a rotary table as the 4th axis Tsdozqva Sspfx Am Tsa Linear guide in all three axes Glass scales in all axes Laser tool measurement, workpiece measuring probe RENISHAW IKZ 40 bar Splash guard full enclosure High-pressure flushing Work area light 30726

Condition: used, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, total height: 3,000 mm, total length: 3,600 mm, total width: 2,200 mm, table width: 450 mm, table length: 710 mm, SPINNER MC650 CNC Vertical machining centre X - Travel 650 mm Y - Travel 450 mm Z - Travel 450 mm Table Length 710 mm Table Width 450 mm Length 3600 mm Width 2200 mm Height 3000 mm Weight 9500 kg Tedezimhkopfx Am Tsa Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, Technical specifications: Travel ranges (X/Y/Z): 1460 / 610 / 500 mm Clamping capacity 4th axis: 320 mm CNC control: SIEMENS 840 D - SL Tedpfx Aozn Rdaem Tja Number of axes: 3 Spindle mount: ISO 40 Max. workpiece weight: 800 kg Number of positions in the tool changer: 32 Spindle speed: 12,000 RPM Dimensions (length x width x height): approx. 420 x 2500 x 3000 mm Machine weight: approx. 9.5 tons Accessories: Chip conveyor The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 37,336 h, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: SIEMENS, controller model: 810D PowerLine, workpiece height (max.): 610 mm, total height: 2,750 mm, total width: 2,300 mm, table width: 600 mm, table length: 900 mm, table load: 500 kg, overall weight: 4,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, positioning accuracy: 0.005 mm, product length (max.): 2,750 mm, number of axes: 3, This 3-axis SPINNER VC810 was manufactured in 2004. It features an X-axis travel of 810 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine is equipped with a maximum spindle speed of 8,000 rpm and an automatic pick-up tool changer with a capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the SPINNER VC810 vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse: 30 m/min • Taper Size: SK40 (DIN 69871A) • Tool Changer: Automatic Pick-Up Tool Changer • Linear Guideways on All Axes • Counterweight on Z-Axis • Coolant System • Working Area Light • Oil Mist Extraction System • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 50 A • Rated Current (IN): 50 A • Chip Conveyor (optional) Todpfx Aezlrunjm Tea Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 40,767 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 570 mm, total height: 1,800 mm, total width: 1,350 mm, overall weight: 2,500 kg, bar diameter (max.): 52 mm, controller manufacturer: SIEMENS, product length (max.): 2,100 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 52 MC was manufactured in 2007. It features a robust design with optional equipment including a bar feeder, parts catcher, and a turret with driven tools. The machine is equipped with a collet chuck for clamping and a dust extraction system for efficient operation. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 52 MC horizontal turning machine we have for sale. Contact us for further details. • Number of Live Tools: 12 • Live Tool Speed: 6,000 rpm • Live Tool Torque: 23.5 Nm • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: 280 mm • Maximum Swing Diameter: 400 mm • Distance Between Centers: approx. 550 mm • Main Spindle Nose: A6 • Bar Capacity: 52 mm • Main Spindle Torque: 92 Nm • Coolant Tank Capacity: approx. 85 l • Coolant Pressure: 8 bar • Supply Voltage: 3/PE ~ 400 V • Collet Chuck Used for Clamping • Dust Extraction System Todpfxszlq I Ts Am Tea • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 34 A • Rated Current (IN): 35 A • A collet chuck used for clamping • Turret with driven tools Optional equipment: • Bar feeder • Parts catcher • Chip conveyor • Tailstock Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 30

Condition: ready for operation (used), Year of construction: 2009, operating hours: 26,180 h, spindle speed (max.): 2,500 rpm, travel distance X-axis: 360 mm, travel distance Z-axis: 980 mm, spindle motor power: 33,000 W, total height: 2,090 mm, total width: 1,980 mm, overall weight: 7,500 kg, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, product length (max.): 3,250 mm, workpiece diameter (max.): 500 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details. • Live Tool Speed: 4,000 rpm • Live Tool Power (100%/40%): 5 / 9.6 kW • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: approx. 500 mm • Maximum Swing Diameter: approx. 800 mm • Distance Between Centers: 800 mm • Main Spindle Nose: A11 • Main Spindle Power (100%/40%): 22 / 33 kW • Main Spindle Torque (Gear 1, 100%/40%): 175 / 263 Nm • Main Spindle Torque (Gear 2, 100%/40%): 700 / 1050 Nm • Coolant Tank Capacity: approx. 235 l • Hydraulic Tank Capacity: approx. 11 l • Central Lubrication Tank: approx. 2–3 l • Machine Weight: approx. 7,000–7,500 kg • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 63 A • Rated Current (IN): 80 A • Collet Chuck Used for Clamping • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 63 A • Rated Current (IN): 80 A • Collet chuck used for clamping • Dust extraction system Optional equipment: • Bar feeder • Parts catcher • Turret with driven tools • Chip conveyor • Tailstock Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 50 Tsdjzlqycopfx Am Tsa

Condition: used, Year of construction: 2006, operating hours: 29,199 h, functionality: fully functional, machine/vehicle number: AK0272, Equipment: documentation/manual, - Year of manufacture: 2006 - Fully functional, powered on, ready for demonstration - With driven tools - With sub spindle - Siemens 840 D control Todpfxoxgryms Am Tsa - Incl. chip conveyor - Swing diameter over bed: 685 mm - Centre distance: 526 mm - Travel paths: X 240 mm / Z 640 mm / B 520 mm - Rapid traverses (X, Z, B): 18 / 24 / 24 m/min Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Todpfxezkpvas Am Tja Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2002, Swing diameter over bed: 350 mm Todpfx Aszl Tkkom Toa Swing diameter over carriage: 180 mm X-axis travel: 155 mm Z-axis travel: 800 mm

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, Used Spinner Robobox, used to automate the loading and unloading of Spinner lathes with plastic components. Tsdpszi Elhjfx Am Toa Fanuc M10iD 6-axis robot, 1420 mm reach, 12 kg gripper unit. Barely used. Dual gripper, 5 drawers 800 x 600 mm (3 x 150 mm, 2 x 200 mm height). Safety scanner. Note: Hard drive needs to be replaced.

Condition: used, Year of construction: 2012, x-travel 760 mm y-travel 460 mm z-travel 460 mm control TNC 620 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 14 / 10 kW Torque 89 / 63,7 Nm tool taper SK 40 table surface area 900 x 410 mm max. table load 350 kg T-slots 4x number of toolpositions 24 pos. max. tool diameter 130 mm Tsdpfszgibuox Am Tja max. tool length 200 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 36 m/min total power requirement 20 kVA weight of the machine ca. 3,3 t dimensions of the machine ca. 3,0 x 2,5 x 2,9 m CNC Machiningcenter Vertical SPINNER - VC 750

Condition: good (used), Year of construction: 2011, operating hours: 41,800 h, functionality: fully functional, turning length: 550 mm, turning diameter: 280 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,800 mm, total length: 2,100 mm, total width: 1,350 mm, quill travel distance: 500 mm, quill diameter: 60 mm, quill stroke: 125 mm, type of input current: AC, torque: 121 Nm, overall weight: 4,000 kg, chuck outer diameter: 225 mm, Equipment: documentation/manual, For sale is a TC400 52MC CNC turning machine from the German manufacturer Spinner Werkzeugmaschinenfabrik GmbH, built in 2011. It is in good used condition, with 41,816 hours of active operating time, of which 15,048 hours represent machining time. The machine has not been in operation for the last 5 years and was serviced by a Spinner technician in July 2025. It features a tool turret with 12 driven tools, an automatic workpiece removal system with a conveyor belt, a chip conveyor, and 4 foot pedals. The technical documentation in German and English, the wiring diagram of the electrical lines, the service manual, the latest maintenance reports, the original invoice, and several supplementary tool brochures are included in their original form. In addition, various tools are included, which are still functional, some of which have barely been used. Manufacturer: Spinner Werkzeugmaschinenfabrik GmbH Model: TC400 52MC Machine No.: AU0474 Year of manufacture: 2011 Weight: 4,000 kg The detailed technical specifications can be found in the excerpts from the technical documentation in images 2, 3, and 4. The price of the machine includes the machine itself, some tools and accessories, as well as loading onto a truck (a suitable forklift is available). Any shipping or collection must be arranged separately and is not included in the price. Tedpfx Amsy Nxd Hs Tsa The price of the machine is quoted as a net price. If you are interested, please contact us by email, direct message, or by phone. We will gladly send you a current video to demonstrate the machine's functionality upon request. Fitok GmbH, Moritz Hanesch, 07.05.2026, updated 28.05.2026

Condition: excellent (used), Year of construction: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: Short bar loader Spinner Servo-Load 80-1500V2 with support stand Control: Fanuc 32iTB with color LCD display/control panel 1 Drive motors for X/Z axes and spindle manufactured by GE Fanuc with digital AC technology, traversing paths X = 200 mm, Z = 515 mm. Main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6=40%). Main spindle as integrated motor spindle with water cooling, spindle nose A6. C-axis for spindle including software option 'Transmit' for face machining and 'cylindrical interpolation' for peripheral machining. Hydraulic hollow chuck cylinder. 12-position indexing turret for tool holders in accordance with DIN 69880/30 mm, 12 driven tool stations with turret for milling and drilling operations. Tailstock for TC400, MK4. Tsdpfx Amewwucus Tsa Chip conveyor TC400 with enlarged L-shaped coolant tank, approx. 150 liters with centrifugal pump, 50 l/min, 3.3 bar. Parts catcher, tool setter arm, high-pressure pump, electrostatic air cleaner.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,900 h, travel distance X-axis: 1,530 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 110, number of axes: 5, This 5-axis SPINNER U1530 was manufactured in 2020. It features an impressive X-axis travel of 1,530 mm, Y-axis travel of 530 mm, and Z-axis travel of 465 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool capacity of 110 stations. If you are looking to get high-quality machining capabilities, consider the SPINNER U1530 vertical machining centre we have for sale. Contact us for further details. Tsdpfx Aszf Aghom Toa - Tool Capacity: 110 tool stations (large capacity chain magazine)- Coolant System: IKZ (Internal Coolant Supply / Through-Spindle Coolant)- Additional Equipment: Swivel rotary table (5-axis configuration), standard fixed table extension with vise clamping system, chip conveyor, Elbaron mist/smoke extraction unit, hydraulic/coolant pump station with pressure gauge and CEMO 100-liter auxiliary tank Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2015, operating hours: 12,244 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 700 mm, spindle motor power: 11,000 W, total height: 1,620 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: 840D-SolutionLine, number of slots in tool magazine: 16, number of axes: 2, This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Additional equipment • Full splash guard cladding + coolant unit • Work area light + pneumatic equipment • Panoramic window for optimum visibility into the work area Machine Benefits Technical Machine Benefits • Center distance: approx. 600 mm • Max turning diameter: 310 mm • Torque: main spindle (fanuc, s6 40%) 178 nm, main spindle (siemens, s6 40%) 301 nm • Quill stroke: 120 mm • Adjustment travel: 475 mm • Speed of rotating tools: 6000 1/min • Driven tool power: (fanuc, 30 min) 3. 7 kw, (siemens, 40%) 6. 0 kw Extra Information Media Pneumatics max. operating pressure: 10 bar Normal pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Unit Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feed (electric) Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools Yes Taper Size VDI 30 Tsdpex D E Hnjfx Am Tsa

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,520 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 12,000 rpm, CNC control Sinumerik 840D NC-swivel-rotary table (B-axis and C-axis) automatic tool changer for 30 tools coolant device chip conveyor Technische Daten / technical details: X-Weg / X-travel 1520 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 420 mm B-Achse Schwenktisch / B-axis swivel table -90 - +110 ° C-Achse Rundtisch / C-axis rotary table 360 ° NC-Schwenk-Rundtischdurchmesser / NC swivel-rotary table diameter 500 mm Starrtischaufspannfläche / fixed table clamping area 920 x 540 mm Spindelaufnahme / spindle taper SK40 Tjdpfx Asx S Htzjm Tja Drehzahl Spindel / spindle speed 12000 Upm /rpm Eilgang / rapid feed 32 m/min Antriebsleistung Spindel / drive capacity spindle 25 kW Gewicht der Maschine ca. / weight 10500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 6,000 h, travel distance X-axis: 1,530 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, controller manufacturer: SIEMENS, controller model: 840D-SPIOS V1, overall weight: 10,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 54, number of axes: 5, This 5-axis SPINNER U5-1530 was manufactured in 2021. It features an impressive X-axis travel of 1530 mm, Y-axis travel of 530 mm, and Z-axis travel of 465 mm. The machine includes a fixed rigid table combined with a 2-axis rotary/tilt table, enhancing its versatility. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-1530 vertical machining centre we have for sale. Contact us for further details. Tjdpszc R D Dofx Am Tsa - Number of Axes: 5-axis simultaneous- Table Configuration: Fixed rigid table section (Starrtisch U-1530) combined with a 2-axis rotary/tilt table (SPRT650 / Version T)- Spindle Speed: up to 12,000 rpm (Advanced spindle option)- Spindle Taper: SK40- Tool Magazine Capacity: 54 positions- Short circuit power of the grid (SK-Netz): >= 1.6 MVA (100xPnE/R-Modul in kW)- Connected load: 26 kVA- Nominal voltage: 3~ 400 V + N + PE- Nominal current of protective device (In): 50 A- Operational rated current (Ib): 42 A- Grid frequency: 50 / 60 Hz- Grid type, connection type: TN-Netz (5-wire) with grounded and loadable star point- Residual Current Circuit Breaker (RCCB): Without FI-Schalter (recommended)- Control System: SIEMENS 840D-SPIOS V1 (SINUMERIK 840D sl sl SPIOS V2 platform)- Measuring System: X/Y/Z linear scales (U-1530 Advanced) paired with a BLUM 3D workpiece touch probe and B/C axis measuring system- Coolant Through Spindle (IKZ): Yes, featuring a high-pressure CTS unit preparation and high-pressure tank (BAZ 70 bar)- Rotary Axis Braking: Hydraulic brakes on B + C axes with 2-way rotary union feedthrough (70/7 bar)- Ambient Temperature Range: 15°C < T < 35°C- Relative Humidity:

Condition: ready for operation (used), A CNC horizontal machining center by Spinner is offered, equipped with a twin spindle and two dual tool changers. Travel X/Y/Z: 1000mm/850mm/850mm, distance from spindle center to pallet front face: 100-950mm, distance from spindle nose to table surface: 150-1100mm, rapid traverse X/Y/Z: 32m/min, pallet size: 2×630×630mm, max. pallet load: 1000kg, distance to table: 360mm, table top height above floor: 993mm, door opening: 1200mm, table threads: M16, tool interface 1/2: SK40/SK50, max. speed 1/2: 10000rpm/6000rpm, power S1 1/2: 22kW/22kW, power S3 1/2: 26kW/26kW, max. torque S1 1/2: 139Nm/556Nm, max. torque S3 1/2: 164Nm/656Nm, tool stations 1/2: 60/40, max. tool diameter 1/2: 80mm/115mm, max. tool weight 1/2: 8kg/20kg, control: Fanuc 0i. Machine dimensions X/Y/Z: 5970mm/3470mm/3362mm, weight: approx. 23000kg. Documentation available. Inspection by appointment possible. Tsdpfxjzipgcj Am Tea

Condition: ready for operation (used), Year of construction: 2012, A CNC vertical machining center is offered. Travel X/Y/Z: 1000mm/500mm/570mm, table dimensions X/Y: 1200mm/500mm, max. workpiece weight: 800kg, distance from spindle nose to table: approx. 120-690mm, tool holder: SK40, max. spindle speed: 10000rpm, tool magazine: 24, max. tool diameter: approx. 80mm, max. tool length: approx. 300mm, max. tool weight: approx. 7kg, rapid traverse X/Y: 24m/min, rapid traverse Z: 20m/min, positioning accuracy: approx. 8-12µm, control: Heidenhain TNC 620. Machine dimensions X/Y/Z: approx. 2700mm/2550mm/2770mm, machine weight: approx. 5100kg. Inspection possible by appointment. Tjdpfxjzipgio Am Tsa

Condition: ready for operation (used), Year of construction: 2012, A CNC vertical machining center is offered. Travel X/Y/Z: 1000mm/500mm/570mm, table dimensions X/Y: 1200mm/500mm, max. workpiece weight: 800kg, distance from spindle nose to table: approx. 120-690mm, tool holder: SK40, max. spindle speed: 10000rpm, tool magazine: 24, max. tool diameter: approx. 80mm, max. tool length: approx. 300mm, max. tool weight: approx. 7kg, rapid traverse X/Y: 24m/min, rapid traverse Z: 20m/min, positioning accuracy: approx. 8-12µm, control: Heidenhain TNC 620. Machine dimensions X/Y/Z: approx. 2700mm/2550mm/2770mm, machine weight: approx. 5100kg. Inspection possible by appointment. Tjdpszipgpjfx Am Tsa

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC-Steuerung Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Tsdpszc Dzvjfx Am Tea Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.