Used Stäubli Tp80 for sale (74)

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: F16/56XTA1/A/01, overall weight: 1,120 kg, load capacity: 100 kg, input voltage: 400 V, type of input current: three-phase, Stäubli TX200 industrial robot including CS8CHP controller and Stäubli teach pendant – manufactured in 2016. We are offering a used Stäubli TX200 industrial robot for sale, including the original Stäubli CS8CHP controller. Technical specifications: Manufacturer: Stäubli Model: TX200 Controller: CS8CHP Year of manufacture: 2016 Payload: 100 kg Condition: Used Scope of delivery: Stäubli TX200 robot Original Stäubli CS8CHP controller Stäubli teach pendant Connection cable Operating manuals Scope of delivery as shown in the photos Laedpfjzli Hujx Anxjg The robot comes from an industrial research and development environment and has been carefully maintained. The system was in operation until it was dismantled. Inspection is possible by appointment. We will gladly send you further photos or technical information upon request.

Condition: good (used), Year of construction: 2015, operating hours: 14,500 h, functionality: fully functional, overall weight: 70 kg, load capacity: 8 kg, arm reach: 400 mm, pivoting range: 360 °, controller manufacturer: Stäubli, controller model: CS8C, teach pendant manufacturer: Stäubli, teach pendant model: SP1, control cabinet width: 445 mm, control cabinet height: 455 mm, input voltage: 230 V, input current: 16 A, repeat accuracy: 0.01 mm, For sale is an industrial SCARA robot system from the renowned manufacturer Stäubli. This system is characterized by its extremely high precision and speed and is in good, well-maintained condition. The package is complete and consists of the robot arm, the matching controller, and the handheld operating device. The robot was only used for a few hours for a test project. Technical data & system components: Robot type: Stäubli TS40 (4-axis SCARA robot) Controller: Stäubli CS8C Operating device (teach pendant): Stäubli SP1 Manual Control Unit Operating hours: Only 14,576 hours (very low operating hours for this system) Condition: Used, fully functional Special advantages of this offer: Lajdpfxozl Nq Te Anxjg Error-free system status: The controller starts up without any errors. The display of the operating device explicitly states: "Hardware signal error: no error." Low operating hours: With just over 14,500 operating hours, the system still has a large part of its service life ahead of it. Complete package: Including all necessary connection cables (as shown in the pictures). Sales and delivery conditions: Price: €9,800 (negotiable) Legal note: Sale is made from our location with exclusion of any warranty or guarantee (sold as is, ideal for B2B / commercial / export). Shipping/collection: Shipping can be arranged, but must be paid for by the buyer. The system can be inspected by prior appointment. If you are interested or have any questions, please do not hesitate to contact us or send us your price offer!

Condition: excellent (used), Year of construction: 2023, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 03/2023 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller. This compact robot system has been designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable, among other applications, for electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical Data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot Type: SCARA Robot Number of Axes: 4 Robot Year of Manufacture: 03/2023 Reach: 460 mm Rated Payload: 2.4 kg Maximum Payload: 8.4 kg Z-Stroke: 200 mm XY Repeatability: ±0.01 mm Lsdpfxszlq E So Anxjag Z Repeatability: ±0.004 mm Rz Repeatability: ±0.002° Mounting Type: Floor Mounting Performance Data: Maximum Speed Axis 1: 550°/s Maximum Speed Axis 2: 720°/s Maximum Speed Axis 3: 2,500 mm/s Maximum Speed Axis 4: 2,500°/s Cycles per Minute: up to 240 Power Consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller Year of Manufacture: 03/2023 Controller Version: Rackable Supply: 1 × 230 V AC / 50–60 Hz Connection Power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Equipment: Stäubli TS2-40 SCARA Robot Stäubli CS9-TS2-40 Robot Controller Original Robot Connection Cable (Robot ↔ Controller) Pneumatic and Electrical Connections in Robot Arm Ethernet Interface PROFINET Interface VAL-3 Programming System End-of-Arm Tooling according to Images Accessories according to Images Dimensions: Maximum Reach: 460 mm Z-Stroke: 200 mm Dimensions CS9 Controller (H × W × D): approx. 270 × 445 × 365 mm Shipping Data: Robot Weight: approx. 38 kg Controller Weight: approx. 30 kg Total Weight: approx. 68 kg Shipping Dimensions on Pallet (W × D × H): approx. 1,200 × 800 × 700 mm Condition: Used Year of Manufacture: 2023 Optical Condition according to Images. System start-up and information menus have been tested. A teach pendant is not included in the scope of supply. Scope of Supply: Stäubli TS2-40 SCARA Industrial Robot Stäubli CS9-TS2-40 Controller Original Robot Connection Cable (Robot ↔ Controller) End-of-Arm Tooling Accessories according to Images Scope of supply as shown in the images. The table shown in the photos, as well as any other items not expressly mentioned, are not included in the sale. Subject to change, errors and prior sale.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 teach pendant Manufacturer: Stäubli Model: TS2-40 Robot year of manufacture: 02/2024 Controller year of manufacture: 02/2024 Machine type: 4-axis SCARA industrial robot Controller: Stäubli CS9-TS2-40 For sale is a used Stäubli TS2-40 SCARA industrial robot including CS9-TS2-40 robot controller, SP2 teach pendant and original robot connection cable. The compact robot system was designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for, among other things, electronics manufacturing, machine assembly, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 02/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Energy consumption according to VDMA 24608: approx. 0.397 kW Ledpfx Ajzlry Ronxjag Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 02/2024 Controller version: Rack controller Teach pendant: SP2 Power supply: 1 × 230 V AC / 50–60 Hz Connection power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Version: Teach pendant / handheld device Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Date of manufacture: 11/2023 Connections: Controller power supply: 1 × 230 V AC / 50–60 Hz Power consumption: 1,700 VA PROFINET Device Ethernet Digital inputs and outputs Pneumatic connections on the robot Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9-TS2-40 robot controller Stäubli SP2 teach pendant Original robot connection cable Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Tool mounting according to images Accessories according to images Dimensions: Robot dimensions (W × D × H): approx. 400 × 300 × 650 mm Controller CS9 dimensions (W × D × H): approx. 600 × 500 × 270 mm Teach pendant SP2 dimensions (W × D × H): approx. 290 × 180 × 90 mm Maximum reach: 460 mm Z-axis stroke: 200 mm Shipping data: Robot weight: approx. 38 kg Controller weight: approx. 30 kg Total weight without additional accessories: approx. 68 kg Shipping dimensions complete (W × D × H): approx. 1,200 × 800 × 700 mm Shipping on a pallet recommended Condition: Used Year of manufacture 2024 Optical condition according to images. System start and information menus were tested. Robot system including controller and SP2 teach pendant. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9-TS2-40 controller Stäubli SP2 teach pendant Original robot connection cable Tool mounting Accessories according to images Availability: upon agreement. Scope of delivery as shown in the images. The table shown in the photos is not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 05/2024 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 handheld device. This compact robot system is designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for various applications, including electronics manufacturing, machine loading, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 05/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Power consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 04/2024 Controller version: Rackable Power supply: 1 × 230 V AC / 50–60 Hz Connected power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Touchscreen color display Laedpszlhvuefx Anxsg Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Equipment: Stäubli TS2-40 SCARA robot Stäubli CS9 robot controller Stäubli SP2 handheld device Robot and connection cables Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Gripper mounting according to images RoboticsControls software / DVD Technical documentation Dimensions: Maximum reach: 460 mm Z-axis stroke: 200 mm Dimensions CS9 controller (H × W × D): approx. 270 × 445 × 365 mm Condition: Used Year of manufacture 2024. Optical condition according to images. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9 controller Stäubli SP2 handheld device Robot cable and connection cables RoboticsControls software / DVD Technical documentation Accessories according to images Scope of delivery as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, overall weight: 52 kg, Fully functional Laedpfx Aezvfmfonxog

Condition: new, Year of construction: 2018, operating hours: 9,000 h, functionality: fully functional, overall weight: 110 kg, load capacity: 14 kg, arm reach: 1,000 mm, pivoting range: 360 °, repeat accuracy: 0.03 mm, Equipment: documentation/manual, For Sale: Stäubli TX90 Industrial Robot – High Precision, Lightly Used Model: Stäubli TX90 Reach: 1000 mm Repeatability: ±0.03 mm Operating hours: only 9000 mth (powered on, not in continuous operation) The robot is in excellent technical condition, fully functional, and ready for immediate use. Perfect for applications such as handling, assembly, gluing, dispensing, machine tending, or light machining. ➡️ Key advantages of the TX90: Lasdpfxoxuwghe Anxeg Compact design with optimal 1000 mm reach High dynamics and accuracy (±0.03 mm) Fully enclosed structure (IP65 / IP67 depending on configuration) – suitable even for demanding environments Compatible with CS8 control systems

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: F15/51DEA1/A/01, overall weight: 1,150 kg, load capacity: 6 kg, arm reach: 1,000 mm, controller manufacturer: Toolcraft, controller model: CSC8C, For sale is an STÄUBLI TX90 industrial robot in a Toolcraft polishing cell, manufactured in 2015. The item is in very good condition. Main data & connections of the complete system Manufacturer of complete system: MBFZ-toolcraft GmbH Model designation: Polishing cell 3 Machine number: TC 2015/03 Year of manufacture: 2015 Total weight: 1,150 kg Mains voltage / frequency: 400 V / 50 Hz Connection power: 13 kW Required fuse rating: 30 A Compressed air connection: 6 bar (constant) Conformity: CE marking 2. Data of the integrated Stäubli robot Model / Type: TX90 (6-axis articulated arm robot) Machine identification number: F15/51DEA1/A/01 Robot manufacturing date: 07-2015 Weight of kinematic system: 111 kg (245 lbs) 3. Extended performance & kinematic data (manufacturer's specification) Number of controlled axes: 6 axes Maximum reach: 1,000 mm (between axis 1 and axis 6) Repeatability (ISO 9283): ± 0.03 mm Protection class of the robot arm: IP65 Axis travel ranges (range of motion) Axis 1 (A1 - rotation): ±180° Axis 2 (A2 - arm): +147.5° to -60° Axis 3 (A3 - forearm): +145° to -145° Ledszk Hbgepfx Anxjag Axis 4 (A4 - wrist rotation): ±270° Axis 5 (A5 - wrist swivel): +120° to -105° Axis 6 (A6 - flange rotation): ±270° 2. Maximum axis speeds (dynamics) Axis 1: 400°/s Axis 2: 400°/s Axis 3: 430°/s Axis 4: 540°/s Axis 5: 475°/s Axis 6: 760°/s 3. Moments of inertia & forces Maximum moment of inertia Axis 5: 0.48 kg⋅m² Maximum moment of inertia Axis 6: 0.1 kg⋅m² Upon request, transport and loading can be organized throughout Europe for an additional cost. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying & selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 373 h, This STAUBLI RX160 was manufactured in 2016. It is a robot arm in very good condition, almost like new, with only 373 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI RX160 robot arm. Contact us for more information. Lsdezvyamopfx Anxoag Machine Benefits Technical machine benefits: • Controller and handheld control unit are included Qualitative machine benefits: • Very good condition - like new

Condition: good (used), Year of construction: 2006, Stäubli Type: RS 60 Technical Details Payload: 2 kg Axes: 4 Description Working range: 600 mm; Inner radius: 166 mm; Repeatability: +/- 0.01; W x H x D: 810 x 976 x 710 mm Weight: 70 kg Lsdpfx Anjzdimtexjag Condition: used Scope of supply: Robot arm, connecting cable, computer, and control unit. (Subject to changes and errors in technical data; information provided is without warranty!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2017, operating hours: 50,000 h, functionality: fully functional, arm reach: 600 mm, Stäubli TS60 SCARA Robot – Wall Mount, incl. Base Frame, CS8C Controller, PROFINET Description: Used Stäubli TS60 SCARA robot in wall-mount configuration, including base frame/mounting support. Fully serviced – complete oil change and cleaning carried out. Supplied with Stäubli CS8C controller and PROFINET card. Ready for operation. Technical data: Model: Stäubli TS60 (4-axis SCARA) Mounting: wall mount, incl. base frame Controller: Stäubli CS8C Fieldbus: PROFINET card Payload: 2–8 kg Z-stroke: 200 mm Operating hours: approx. 50,000 h Connection cable: 5 m Condition: serviced (oil change + cleaning done) Laedpfx Anozcwx Uoxeg

Condition: used, Stäubli NH1-130-2.6 robot, manufactured in 2007. This robot comes from a company that has ceased operations. Lsdozyafqopfx Anxoag

Condition: like new (used), Year of construction: 2017, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: F17/5EWVB1, overall weight: 350 kg, load capacity: 30 kg, arm reach: 1,700 mm, I offer the Stäubli RX160 robot, the option to add a uniVal Drive The robot is in almost new condition, used only 4500 hours motor see. photo. Maximum load 30kg Nominal load 20Kg Reach (between axis 1 and 6) 1710 mm Number of degrees of freedom 6 Repeatability - ISO 9283 ±0.05 mm Lajdsr Dvd Ijpfx Anxog Stäubli series controller CS8C Weight 248 Kg

Condition: like new (used), operating hours: 50 h, functionality: fully functional, We have 2 units of Stäubli Scara TS60 robots with approximately 50 operating hours. Lajdpfx Anjy Rm Rdsxsg

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, We offer for sale a powerful Stäubli TX200 industrial robot that has undergone a thorough diagnostic test by the Stäubli service team. The test results confirmed that the robot is in the current condition of a new machine, with only 400 engine hours. The service log is available in PDF format for more detailed viewing. Laedpfx Anonncaloxog Technical Specifications: Nominal load capacity: 100 kg Reach between axis 1 and 6: 2194 mm Repeatability (ISO 9283): ± 0.06 mm Maximum speed at the center of gravity of the load: 12 m/s Standard for clean rooms (ISO 14644-1): 5 Protection class (wrist): IP65 (*67) Equipment and features: Control unit: Stäubli CS8 series CS8C HP Digital inputs/outputs: 16/16 Connecting cable: 10m long WMS Mode Selector and Control Panel SP1 Docking station Components and interfaces: Pneumatic system: 2 solenoid valves in 5/2-way monostable variant and 3 direct lines between base and forearm. Electrical system: 1 socket with 19 contacts (7 twisted pairs including 2 shielded, 3 power contacts). Expansion option: Ethernet 19-pin cylindrical connector with 5 twisted pairs and 3 power contacts. This robot is ideal for precision applications, including machining, thanks to its calibration and powerful features. It is fully equipped and ready for deployment in industrial environments.. For more information or a tour, do not hesitate to contact us. We look forward to your cooperation.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: F21/0023666, Equipment: documentation/manual, Technical Specifications: Maximum load: 20 kg Nominal load: 7 kg Reach: 1000 mm Number of degrees of freedom: 6 Repeatability according to ISO 9283: ± 0.03 mm Ljdpfx Aopd In Donxjag Pneumatic connection: 2 direct lines between base and forearm 2x solenoid valve 5/2 way bistable (compressed air) Electrical connection on the arm: 17 electrical I/O lines Multibus cable inside the arm: 13 electrical lines, 4 multibus cat5e lines, DIN M12 Standards and degrees of protection: Standard for clean rooms - ISO 14644-1: Level 5 Protection class (wrist): IP65 (*IP67) Safety: Absolute encoders up to SIL3-PLe class ensuring the highest level of safety. Management and License: CS9 management with VAL3 license Controller power supply: 3x400-480V-50/60Hz Other equipment: Control panel (with 5m cable). This robot not only offers impressive technical parameters, but also the highest safety standards thanks to SIL3-PLe class encoders. With a wide range of applications and precise repeatability, it is ideal for various industrial purposes. For more information or a tour, contact us by email or phone (in English). We are here for your questions and look forward to your interest.

Condition: excellent (used), Stäubli Type: TX90L Robot / CS8C Controller Six-axis robot with control unit For sale is a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing, and training applications. Programming via VAL3. Technical Data – Robot Model: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg short-term Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Ledpszix Ucofx Anxeag Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical Data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Condition: used Scope of delivery: (see photo) - Stäubli TX90L robot arm - CS8C controller - Original teach pendant - Connection cables (Subject to changes and errors in the technical specifications and information!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Stäubli Type: TX90XL Robot / CS8C Controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including CS8C controller and original teach pendant. The TX90XL is suitable for pick & place, assembly, machine tending, parts handling, as well as automation, testing, and training applications. The XL version offers an extended reach for flexible deployment. Programming via VAL3. Technical Data – Robot: Type: TX90XL Axes: 6 Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Technical Data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Lasdpfxjzix Uis Anxsg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see image) • Stäubli TX90XL robot arm • CS8C controller • Original teach pendant • Connection cables (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller The high-performance robots in the TX90 series, designed for medium payloads, offer maximum flexibility for many applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The completely encapsulated design (IP 65) allows use in cleanrooms or under aggressive environmental conditions. Features Completely encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of components Standard version for cleanroom class ISO 5 Easy to clean Excellent dynamic path performance High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical data: Type CS8C Dimensions (H x W x D) Lajdpfx Anjzh U Sbsxog 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash Disk and USB port System/Programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: TX90L robot / CS8C controller Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller The high-performance robots in the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – these six-axis robots are easy to integrate. The completely encapsulated design (IP 65) enables use in cleanrooms or under harsh environmental conditions. Features Completely encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard design for cleanroom class ISO 5. Easy to clean. Excellent dynamic path performance High flexibility Precision, dynamics, and speed with reduced maintenance effort Optimal utilization of the workspace Lajdpfx Aezh U Tfonxeg Technical data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/Programming language VAL 3 (multitasking interpreter language), PLC language IEC 61131-3 Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Stäubli Industrial Robot TX60 with CS8C-TX60 Controller – 6-Axis Robotic Arm For sale is a pre-owned Stäubli TX60 industrial robot, including the CS8C-TX60 control unit. The robot is ideally suited for precise handling, assembly, or inspection tasks in automation technology. Technical Data – Robotic Arm TX60 Axes: 6 Max. load capacity: 4.5 kg (up to 9 kg possible) Reach: 670 mm Repeatability: ± 0.02 mm Mounting: Floor, wall, or ceiling Protection rating: IP65 (optional IP67 at wrist) Robot weight: approx. 51.4 kg CS8C-TX60 Controller Power supply: 1X230V-50/60Hz, 1700 VA, 120 kA Compact 19" controller with VAL3 control system Communication via Ethernet / RS232 / fieldbus (optional) Digital inputs/outputs and expansion options Protection rating: IP20 (optional IP54) Dimensions: approx. 331 × 445 × 455 mm Lasdpeziaayefx Anxog Controller weight: 31 kg Scope of Delivery Stäubli TX60 robotic arm CS8C-TX60 controller Connection cables (robot–controller) Teach pendant, handheld programming device Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and details!) We are happy to answer any further questions by phone.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 130 kg, arm reach: 2,194 mm, repeat accuracy: 0.06 mm, spindle speed (max.): 24,000 rpm, number of axes: 6, The system is completely unused. The system consists of: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit Lasdpfx Aoxt Nzbsnxeg - Chip conveyor - Rotary table for pallet loading - Complete enclosure of the working area - Tool carrier pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Reach: 2,194 mm × 370° Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: Taper ISO30 Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45°C Ambient humidity: 20–80% rH Weight: 980 kg Note regarding sale: The system was intended for milling roof racks. However, a change of shareholder for the user occurred during delivery. The new shareholder did not take over the system. Further details on the equipment can be found in the attached documentation.

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Ljdpfourvzrjx Anxjag Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 800 h, functionality: fully functional, overall weight: 1,000 kg, load capacity: 130 kg, arm reach: 2,590 mm, pivoting range: 360 °, controller manufacturer: Stäubli, input voltage: 400 V, type of input current: AC, repeat accuracy: 0.05 mm, We offer for sale a powerful Stäubli TX200L industrial robot that has undergone a thorough diagnostic test by the Stäubli service team. The test results confirmed that the robot is in the current condition of a new machine, with only 400 engine hours. The service log is available in PDF format for more detailed viewing. Technical Specifications: Nominal load capacity: 100 kg Reach between axis 1 and 6: 2594 mm Repeatability (ISO 9283): ± 0.06 mm Maximum speed at the center of gravity of the load: 12 m/s Standard for clean rooms (ISO 14644-1): 5 Protection class (wrist): IP65 (*67) Equipment and features: Control unit: Stäubli CS8 series CS8C HP Digital inputs/outputs: 16/16 Connecting cable: 10m long WMS Mode Selector and Control Panel SP1 Docking station Components and interfaces: Pneumatic system: 2 solenoid valves in 5/2-way monostable variant and 3 direct lines between base and forearm. Electrical system: 1 socket with 19 contacts (7 twisted pairs including 2 shielded, 3 power contacts). Expansion option: Ethernet 19-pin cylindrical connector with 5 twisted pairs and 3 power contacts. This robot is ideal for precision applications, including machining, thanks to its calibration and powerful features. It is fully equipped and ready for deployment in industrial environments. Lajdpfxsvcf N Dj Anxsg For more information or a tour, do not hesitate to contact us. We look forward to your cooperation.

Condition: ready for operation (used), Year of construction: 2017, overall weight: 1,300 kg, load capacity: 30 kg, arm reach: 1,710 mm, number of axes: 6, This 6-axis Stäubli CS8C-RX160 was manufactured in 2017. It features a maximum payload of 30 kg and a reach of 1710 mm, making it suitable for various applications. The robot arm is designed for high-speed performance with a maximum TCP speed of 10.3 m/s. If you are looking to get high-quality automation capabilities, consider the Stäubli CS8C-RX160 robot arm we have for sale. Contact us for further details. • Controller: Stäubli CS8C • Payload: nominal 20 kg; max 30 kg (up to 34 kg under conditions) • Reach (axis 1–6): 1710 mm • Repeatability: ±0.05 mm • Axis range of motion: • Axis 1: ±160° • Axis 2: ±137.5° • Axis 3: ±150° • Axis 4: ±270° • Axis 5: +120° / -105° • Axis 6: ±270° (configurable up to ±18000°) • Max axis speeds: • Axis 1: 200°/s • Axis 2: 200°/s • Axis 3: 255°/s • Axis 4: 315°/s • Axis 5: 360°/s • Axis 6: 870°/s • Working envelope: • Min reach (axis 1–5): 312 mm • Min reach (axis 2–5): 422 mm • Distance axis 3–5: 625 mm • Performance: • Max TCP speed: 10.3 m/s • Max inertia axis 5: 4 kg·m² • Max inertia axis 6: 1 kg·m² • Brakes: all axes • Installation and environment: Ledpfx Ansy Epfpsxsag • Temperature: +5°C to +40°C • Humidity: 30–95% (non-condensing) • Mounting: Floor / Ceiling • Protection and interfaces: • Protection class: IP65 / IP67 • Cleanroom class: ISO 14644-1 Class 5 • Electrical connection: 19-pin connector • Pneumatic: Optional valves