Used Stamping Press (Servo) + Decoiling Line for sale (23,698)

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation Rjdpfx Akopvlf Sohocb - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: good (used), Year of construction: 1984, Power: 800 kN Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment Rcsdpjdhzf Ijfx Akhob with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: ready for operation (used), Year of construction: 2001, operating hours: 46,500 h, functionality: fully functional, machine/vehicle number: 11623, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 500-110B (500 kN, year 2001, Kom. 11623) equipped with Pressensteuerung Typ B control, Unidor tool and press safety monitoring system, and EFD Micromat strip lubrication. The line includes a sound-insulating safety cabin, finished-parts output conveyor, PBK PE 250/200 USG coiling machine (2004), and HURAS HPK 1500-220 horizontal decoiler (2015). Available as a complete turnkey lot. Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model BSTA 500-110B Serial / Commission No. Kom. 11623 Year of Manufacture 2001 Control System Type B Control Software Version 7.3.5 — Language: German / English Operating Hours 46,800.0 h (as shown on press control) Press Force (Nominal) 500 kN Total Weight approx. 8,700 kg CE Marking Yes — original OEM nameplate Sound Enclosure / Cabin Included — W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable) 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range 64 mm Tool opening width (max.) 1,100 mm Bolster plate — Width × Depth 1,080 × 650 mm Ram face — Width × Depth 980 × 420 mm Baseplate opening W × D 1,060 × 200 mm Strip feed height (adjustable) 60 – 140 mm Rcodpsy I A Rzsfx Akhsb Max. strip pass-through width 250 mm Model: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage 3 × 400 V / 50 Hz Max. connected load 74 kVA Main motor power 22 kW (AC inverter-driven) Control voltage (DC) 24 V DC Pneumatic supply 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including HURAS HPR 1500 220 Horizontal Decoiler (2015) Including PBK PE 250 200 USG Coiling machine (2004) Includign EFD Micromat Strip Lubrication System Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. Rcodjv Hchljpfx Akhsb 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Rcodpfx Akezab Ibshsb Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. Rcjdpfei Db Ibsx Akhsb throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Rsdpfeif Sg Sjx Akhscb Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) equipped with control and Unidor tool and press safety monitoring system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003), and Soprem BR19/160/12/U Straightening machine (2003). Available as a complete turnkey lot. Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Sound Enclosure / Cabin Included: W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003) Including Soprem BR19/160/12/U Straightening machine (2003) Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Redpfx Akoy S E U Rjhjcb Original technical documentation and schematics

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Rsdpfexpqy Djx Akhjcb Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Year of construction: 2000, condition: used, 400 TON HYDROMEC HF4000 NON-FERROUS HOT FORGING PRESS LINE Rcedpfszad Nhsx Akheb MANUFACTURER - HYDROMEC YEAR - 2000 SERIAL NUMBER - 660 MODEL - HF4000 C/D MATERIAL - NON-FERROUS TONNAGE - 400 TON (4000 KN) STROKE - 380MM STROKE PER MINUTE (CONTINUOUS) - 22-35 STROKE PER MINUTE (SINGLE STROKE) - 22-45 RAM ADJUSTMENT RANGE - 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) - 865MM SIZE OF TOOL MOUNTING PLATE - 1000MM X 1000MM MAIN PRESS MOTOR - 59 KW MAIN MOTOR RAM ADJUSTMENT - 2.2 KW CUSHION FORCE - 70 TON (700 KN) CUSHION STROKE - 40 - 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Rcedpfxstx E Rqo Akhsb Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: ready for operation (used), Year of construction: 1999, operating hours: 49,800 h, functionality: fully functional, machine/vehicle number: 10992, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 500-110B (500 kN, year 2001, Kom. 11623) equipped with Pressensteuerung Typ B control, Unidor tool and press safety monitoring system, and Raziol EBAD 4000 strip lubrication system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, and HURAS HPK 1500-220 horizontal decoiler (2013). Available as a complete turnkey lot. Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model BSTA 500-110B Serial / Commission No. Kom. 10992 Year of Manufacture 1999 Control System Type B Control Software Version 7.3.5 — Language: German / English Operating Hours 49,800.0 h (as shown on press control) Press Force (Nominal) 500 kN Total Weight approx. 8,700 kg CE Marking Yes — original OEM nameplate Sound Enclosure / Cabin Included — W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable) 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range 64 mm Tool opening width (max.) 1,100 mm Bolster plate — Width × Depth 1,080 × 650 mm Ram face — Width × Depth 980 × 420 mm Baseplate opening W × D 1,060 × 200 mm Strip feed height (adjustable) 60 – 140 mm Max. strip pass-through width 250 mm Model: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage 3 × 400 V / 50 Hz Max. connected load 66 kVA Main motor power 22 kW (AC inverter-driven) Control voltage (DC) 24 V DC Pneumatic supply 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including HURAS HPR 1500 220 Horizontal Decoiler (2013) Includign Raziol EBAD 4000 Strip Lubrication System Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Rcedjy I A U Tepfx Akhsb Original technical documentation and schematics

Condition: used, Hydraulic press line for deep drawing and forming processes, featuring multiple presses and automated parts handling. Manufacturer: Fritz Müller / Schuler Machine type: Hydraulic press line / transfer press Number of presses: 6 Press 1 Type: BZE 1200 – 35.1.1 Year of manufacture: 1972 Press force: 12,000 kN Press 2 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 3 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 4 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Press 5 Type: ZE 800 – 35.1.1 Year of manufacture: 1969 Press force: 8,000 kN Rcsdpfey Ndz Rex Akhob Press 6 Type: ZE 800 – 40.3.1 Year of manufacture: 1993 Press force: 8,000 kN Max. workpiece size: 3,500 x 2,200 mm Max. tool weight: 32,000 kg Material thickness: 0.5 – 2.5 mm Max. drawing depth: 430 mm Documentation: No digital data available Drawings: Partially available as ink drawings, can be viewed onsite Packing lists: No packing lists with individual weights available Type plates: Not fully available, exact model designations only partially present Location: Radeberg

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² Rjdpfxelil Ews Akhocb reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t Redebicz Hepfx Akhscb coil-dia max. 1.500 mm

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700 Rcedpjw Uc T Isfx Akhsb

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 125 t, Single-column press – Manufacturer: Durendus – 125 t servo press – Table 2200 × 750 mm For sale is a hydraulic C-frame servo press from Durendus with an adjustable pressing force of up to 125 t and integrated 50 t ejector. Thanks to modern servo-hydraulics, this machine offers up to 40% reduced energy consumption compared to conventional systems and is ideal for demanding assembly, forming, and production processes. ===== Technical data & information: Hydraulic servo press – C-frame – 125 t ==== General Specifications - Manufacturer: Durendus - Model: Single-column press / servo press - Design: C-frame press - Pressing force: 20 – 125 t (adjustable) - Machine weight: approx. 8,700 kg - Dimensions (W × D × H): approx. 2,400 × 2,000 × 3,300 mm - Table height: 870 mm - Installation height: max. 1,000 mm ==== Table & Ram - Table area: 2,200 × 750 mm - Ram area: 980 × 750 mm - Guidance: 4 guide columns Ø 100 mm - Tool centering: 50 mm receptacle - Preparation: Vibration damping plates (30 mm) - Preparation: Robot interface ==== Ejector - Ejector force: 50 t - Ejector stroke: 200 mm ==== Hydraulic Cylinder - Stroke: 0 – 700 mm (adjustable) - Working pressure: max. 245 bar - Return speed: 300 mm/s - Idle speed: 300 mm/s - Pressing speed: - up to 25% load: 25 mm/s - up to 50% load: 14 mm/s - up to 80% load: 7 mm/s - up to 100% load: 6 mm/s ==== Hydraulic Unit - Servo hydraulic pump: Duplomatic, 143 l/min - Servo motor power: 15 kW - Pressure accuracy: ± 5 bar - Pre-fill valve: NG-160 Rcsdpex Aqtqofx Akhsb ===== Assembly, forming technology, series production, automated manufacturing, toolmaking, energy-optimized pressing processes Servo press, single-column press, C-frame press, hydraulic press, industrial press, production press, energy-efficient press, die spotting press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a custom quote. Our hydraulic presses are manufactured in accordance with both German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the Brazilian national safety standard NR 12, which builds upon those regulations. Our core expertise lies in special-purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. We primarily use components from leading European manufacturers for the press hydraulics.

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 Redpon Smg Tjfx Akhecb TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: good (used), Code: 0377 Brand: COLOMBO R Model: PCA.S Automatic continuous-cycle hot-pressing line for the production of panels, furniture, doors, paneling, sandwich panels, and various Sturdy supporting structure Composition: 4-roll gluing machine OMMA- Width 1400 mm Disc transfer conveyor Preparation table Rcedpfxjy I Snce Akhjb Press COLOMBO 5500 x 1400 mm - n° 8 pistons - diameter 150 Solid steel platen Top-down pressing Pressure 4 kg/cm² Automatic unloading with photocell devices Work surface height 800 mm Closing times are reduced to 1–2 seconds and opening times to 2–3 seconds Overall dimensions press mm 5960 x 1900 x 2320 h Complete line length 22 mt Installation of the line does not require any foundation

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000 Rjdpjx I Nfrsfx Akhscb

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Rcodpfer Iil Eex Akhsb Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: ready for operation (used), functionality: fully functional, Press line for manufacturing can ends (tops and/or bottoms) Comprising: - Bliss 1831 double die press - Bliss double curler - IMC / Grace compound liner Rcedpfx Akex Ezuyoheb - Drying oven - Production capacity: up to 600 ends per minute

Condition: like new (used), Year of construction: 2022, operating hours: 91 h, functionality: fully functional, number of ink cartridges: 4, color channels: CMYK, resolution (max.): 2,400 dpi, paper weight (min.): 52 g/m², paper weight (max.): 400 g/m², paper width (min.): 100 mm, paper width (max.): 330 mm, paper height (min.): 148 mm, paper height (max.): 660 mm, number of feeding trays: 5, total length: 4,642 mm, total width: 831 mm, total height: 1,212 mm, space requirement length: 6,500 mm, space requirement width: 2,500 mm, space requirement height: 2,000 mm, counter reading (black): 1,411, counter reading (color): 84,400, year of last overhaul: 2026, type of input current: AC, input current: 16 A, input voltage: 230 V, Equipment: auto duplex, brochure finisher, raster image processor, Xerox Versant 280 Press – Full Bleed Trimming, Only 85,811 Clicks For sale is a well-maintained Xerox Versant 280 Press complete with full-bleed booklet production line from a professional environment with low usage (only 85,811 total clicks). Machine is fully operational and production-ready (last inspection: 23.04.2026). Price (excluding VAT, negotiable): CHF 25,000 / EUR 27,300 – EXW Canton of Zurich __ EUR value indicative based on daily exchange rate. Delivery and installation can be arranged upon request via specialized transport company. Machine Details: Xerox Versant 280 Press - Year of manufacture: 2022, initial operation: September 2022 - Printing speed up to 80 pages per minute (52–220 gsm) - Automatic duplex printing up to 350 gsm - Resolution: 2400 × 2400 dpi (Ultra-HD) - Paper range: 52–400 gsm, format up to 330 × 488 mm Configuration: - Xerox Print Server v2.1 (external Fiery 2.1, incl. workstation with license) - High-capacity tray for oversized formats OHCF (A-CF03, 2,000 sheets) - Production Ready Booklet Maker Finisher (A-FN13) - SquareFold Trimmer (spine forming, face trimming) - Two-Side Trimmer with creasing function (for full-bleed booklets) - Interface module with decurling unit Rodpfx Aey Nfqgokhscb Condition and Maintenance: - Only 85,811 total clicks (84,400 color, 1,411 black & white) - Approx. 6–8% of typical lifespan utilized - Actual print time per counter report: 91 hours - 4 new drum units included (current drums at 15% life remaining, new ones have already been purchased and will be supplied upon handover) ### Last service inspection on 23.04.2026 Service contract (Switzerland); transfer to buyer upon agreement __ Upgrade Potential: The Versant 280 is CMYK+ capable – retrofitting with the Xerox Vivid Kit (Gold, Silver, White, Clear) or Fluorescent Kit is possible via Xerox. Inspection: Viewing and test printing in the Canton of Zurich can be arranged by appointment. Please inquire via email for a call-back.

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Rsdpfxsvkbrqo Akhecb Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Rcjdpjx Ezkuofx Akhsb Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr Top EFF specification High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 x transverse foil feeds : 3 line hologram capability : non stop delivery