Feeding, straightening line + decoiler

LARA DEMAE-300/86/600

Year of construction: 2003, condition: used, pressure 100 t Podpora Rr Eefx Adiogw stroke 10-130 mm no. of strokes 30-90 Hub/min throat 330 mm ram - range of adjustment 100 mm table surface area 950x660 mm ram surface 540x440 mm hole in the table Ø 230 mm table height 1000 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 7 t

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data Podpfx Adeg U Utveiegw load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: used, Year of construction: 2003, pressure 250 t stroke 20 - 190 mm no. of strokes 25 - 140 /min throat 460 mm Pedjvuun Tjpfx Adisgw passage to the back 590 mm dayligth 690 mm table surface area 1500 x 880 mm hole in the table 950 x 250 mm table height over floor 900 mm ram surface 870 x 725 mm ram adjustment 120 mm power requirement 30,0 kW Weight 32,0 t dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm

Condition: refurbished (used), Year of construction: 2025, Drive: servo motor Belt width max. 300 mm Belt thickness 0.5 - 4.0 mm Cross-section max. 1,200 mm² Feed length 0 - 9,999.9 mm Accuracy + / - 0.05 mm Roller diameter 80 mm The feed rollers are hardened and ground. The top roller is lifted to feed in the strip via a pneumatic cylinder and valve. pneumatic cylinder and valve. The contact pressure of the top roller is applied pneumatically via short-stroke cylinders. The top roller is mounted in a torsion-resistant manner to prevent one-sided roller pressure. roller pressure is prevented. Off-center belt transport is permitted. Pgsdsr H Dwispfx Adiew An infeed roller basket, an adjustable lateral belt guide and a belt end belt end control on the infeed side are included in the standard version. included. Protective covers on the feed rollers and the drive elements. The intermediate lifting can be closed and switched off

Condition: used, coil weight 2 x 0,15 t clamping range 265 - 485 mm Pgsdpfxecdrmis Adijw band width 200 mm Thickness of sanding paper 0,1 - 4 mm total power requirement 0,25 kW weight of the machine ca. 180 kg dimensions of the machine ca. 1,2 x 0,9 x 1,2 m - motorized double-turn coiler - newly painted

Condition: refurbished (used), Year of construction: 1999, TECHNICAL FEATURES: Press Model: T50 CNR4 Year of construction: 1999 Rated force: kN 500 Mass: kg. 3.500 Strokes per minute: No. 90 Max. insertions per minute: No. 41 Min./max. operating air pressure: BAR 4÷5.5 Stopping time: s 0.117 Safety distance: mm 187 Energy: KJ 2000 Min./max. adjustable stroke: mm 8÷100 Mace adjustment: mm 70 P.M.I high adjustment: mm.280 Maximum extraction stroke: mm. 30 Work surface area: mm 770x530x58 Mace plane size: mm. 450x300 Shank diameter: mm. 45 Overhang from the center: mm 270 Max. mold size: mm 450x300 Upper mold mass: kg 84 Voltage: V 400 Complete with user manual and CE compliance Warranty six (6) months excluding electronic parts NEW COMPONENTS INSTALLED: - Engine bearings; - Flywheel bearings; - Engine belts; - Clutch plates; Pgodpfxsqbtc Ns Adisw - Front accident guards; - Work surface brightened on CNC machine; - Foot pedals.

Condition: ready for operation (used), Year of construction: 1971, laoding capacity: max. 250 Kg. coil diameter: max. 650 kg. strip metal width: max. 100 mm Pgjdpfx Asdx Rzmodiew

Operating hours: 12,000 h, condition: good (used), functionality: fully functional, Raster press punching line which includes: 1) Dimeco Alipresse type 2330DF unwinder with SV tracking and speed change system. 2) Dimeco Alipresse type 1645 powered straightener with SV tracking and speed change system. 3) Raster eccentric press Type HR 60 SL-4 S with soundproof enclosure . Parameters in the photos. Pgedpjryu Taefx Adiew 4) Documentation.

Condition: used, Year of construction: 2007, pressure 63 t stroke 8 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 440 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,2 t dimensions (WxDxH) 1,3 x 1,8 x 2,8 m permitted for manual loading according to the CE-norm Psdpfx Adjwc U Injiogw with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² Podpfx Adev Svaxsijgw no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound