Used Steuer Foiljet Fbr 104 for sale (989)

Year of construction: 2001, condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm Lasdpfx Aiewabbvjfed The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system).

Condition: ready for operation (used), Trumpf / Hüttinger 1456168 control box Flow 36-48kW SN: 200128104 - 13.56MHz E, used, in good condition, 100% functional, scope of delivery as per photos Laodjx Eu T Aspfx Aifjd

Year of construction: 1988, condition: excellent (used), Heidelberg Cylinder SBD PZ 90 Control System – Technical specifications: 4 impression cylinders, 4 heating zones, foil capacity: 20-800 m, working capacity: 3600 sheets/h, max. sheet size: 64 x 90 cm, min. sheet size: 29 x 45 cm, foil working size: 54 x 82 cm. Lodpfxezd Tw Uo Aifoad

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, Sheet size minimum: 290x400 mm Sheet size maximum: 640x900 mm Sheet thickness maximum: 0.75 mm Hot stamping size maximum: 620x840 mm Sheet edge free of print stamping (gripper edge): 8-10 mm Number of heating zones: 4 Cylinder diameter: 540 mm Backing thickness: 1.5 mm Height of the feed pile and pre-pile: 340 mm Height of the delivery pile: 510 mm Vertically adjustable hot stamping bed: -2...+0.4 mm Width of the stamping foil rolls (max): 840 mm Distance between the stamping foil rolls (min): 3.0 or 1.0 Outside diameter of the stamping foil rolls (max): 140 mm Foil pull rollers and programs (max): 4 Short pulls per program and cycle, number 1...99, length: 0...999 mm Intermediate pull per program and cycle, number as required: 0...999 mm Long pull per program and cycle, number 1, length: 0...999 mm Hot stamping die height: 7 mm Different hot stamping die height also available if required: 6.35 mm Machine speed: 600-4000 Hot stamping speed, max: 600-3000 Connected electrical load ratings (3-phase) for drive: 10.8 kW Connected electrical load ratings for heating and foil pull: 17.0 kW Voltage: 3x400V, 50Hz Overall dimensions: Length of the machine: 4000 mm Width of the machine: 2540 mm Laedpfxjzatf Ee Aifod Height of the machine: 1950 mm Support area of the base frame: 2.1 m² Work area: 5650 mm Length: 5650 mm Width: 3650 mm Total weight: 7500 kg.

Year of construction: 1992, condition: excellent (used), functionality: fully functional, machine/vehicle number: P-Z 176, We are offering this very well-maintained Steuer PZ 90 foil embossing machine, manufactured in 1992. Manufacturer: Steuer Model: PZ 90 Year of manufacture: 1992 This is a machine from the manufacturer STEUER, model PZ 90. - Embossing cylinder format 90x65cm (instead of 90x65cm) - Base is height-adjustable. Lsdpfey Ulitjx Aifsad This embossing cylinder has special functions, such as 3 hologram tracks for embossing (original from PZ-Steuer). The main motor underwent a general overhaul in 2025. There are 3 bases available, and various accessories are included. Dismantling and loading are the responsibility of the buyer; we will only disconnect the machine from the power supply. If you have any questions or require further information, please feel free to send us a message by email.

Condition: excellent (used), Offer consisting of: PZ-82 (57x82 cm), hot foil stamping cylinder in exceptional condition, immediately available, test possible. Laodpfx Aeynuudoifed

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0729389557300, load capacity per storage section: 160 kg, total length: 162,000 mm, total height: 2,500 mm, shelf height: 2,500 mm, shelf length: 162,000 mm, frame height: 2,500 mm, load per truss pair (max.): 160 kg, frame width: 600 mm, number of shelf rows: 23, 11 double-row and 1 single-row shelving units, Sendzimir galvanized, each with a length of 7.03 m, 2.5 m high, 0.6 m deep, each featuring 7 sections with a clear width of 0.97 m, and 7 shelf levels per section, shelf load capacity of 160 kg. - 184 frames (FR25060), pre-assembled, 2500x600 - 1127 shelves (FB097604), 970x600x40 - 88 connectors for double rows (FBDV-Set) Lsdpfx Aisyy I Enjfead - 22 double cross bracings (VK2510) - 23 load capacity signs (BSMcP) Frames pre-assembled Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to site / assembly location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Delivery available throughout Germany mainland, except islands! Deliveries to EU countries upon individual agreement.

Condition: like new (used), ASEPTIC POUCH FILLER WITH DOUBLE 1" FILLING HEAD The aseptic filler is a machine designed to fill pre-sterilized flexible containers with a pressure cap under aseptic conditions (i.e., absence of bacteria). Prepared for filling 200L and 1000L drums. * Production capacity may vary depending on format and product to be filled. Lasdpfxox S Hq Te Aifed INCLUDES: - Infeed and outfeed aseptic drum roller conveyor. - Internal electrical panel. - Touch screen. - Hydraulic equipment.

Condition: like new (used), Features: * System: Forced circulation rising film. * Number of effects: 3 * Tower water consumption: 625 m³/h approximately 500 m³/h with a temperature differential of 10 ºC. Includes: * 2 SIHI vacuum pumps *Flashcooler * Refractometer. * Mono PCM pump Ljdpfx Aioyn Hm Ssfead Production may vary depending on the product. Tomato input production at 5ºC Brix: 700 Tn/24 h. Production of tomato concentrate output at 28º/30ºC Brix: 4,600 kg/h.

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. The sensor automatically follows the prints. Lajdpfx Aezmx Nueifod Extremely easy roll loading. 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Memory channels to store different cut marks. All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Max. load 200kg (440 lbs), max. diameter 60 cm. 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used small hydraulic plate shear from OMAG Lodpfezk Akdsx Aifoad Type: CEL 104 Capacity: 1050 x 4 mm Electric back gauge Year of manufacture: 1987

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Evolution Year 2018 ROLAND film dampening unit with delta effect ROLAND Stream Feeder Wallscreen XL Touchscreen RCI: Remote Control Desk PressPilot Center Lasdpfx Aioy Au Ibjfod InlineColorPilot & ColorPilot D+F Inlineinspector 2.0 EyeC - InlineInspector after last Printing Unit Airglide Delivery Extended Delivery APL (Fully-Automated Plate Changing ) 2xIR/TL Interdeck dryer between 2 coater LTTLV SelectDryer IR/TL/UV in Delivery for Coating, UV Colours and UV Coating Impression Account: 225 Mio. with MABEG RS 104 REEL SHEETER - Year 2011

Condition: ready for operation (used), Heidenhain ERN 180 5000 01-03 encoder. 377 104-96, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Laedpsi Eah Uofx Aifod

Condition: ready for operation (used), Bosch UVF 100M / 4B-12S / 643 / 3386668-1 servo motor, serial number: 104/914339. The terminal box cover is missing, and the connector is slightly damaged. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. ATTENTION: Please request a separate quote for packaging and shipping costs! Ledpfx Aji D Hg Rjifead

Condition: ready for operation (used), Bosch SD-B3.095.030-10.000 servo motor, serial number: 104-914810, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Laedpfsi D E Taex Aifsd

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Laedpfxoig T Ams Aifed Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: good (used), functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Lajdpfszim Auex Aifed Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Table size 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length 225 mm with Wescott drill chuck 0–20 mm Height adjustment: 120 mm Swivel range of drilling unit: 2 x 45° Lsdpfx Aszk Nupeifsad with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in the handwheel with digital display with 2 speeds: 1,400 and 2,800 rpm with travel mechanism LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: at short notice Storage location: Flörsheim

Condition: good (used), Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Pallet racking: boltless racking, heavy-duty racking / 34 uprights and 104 crossbeams -Stand depth: 1100 mm -Stand height 4100 mm: 2 pieces Lajdpjx Ikirjfx Aifsd -Stand height 3500 mm: 13 pieces -Stand height 2000 mm: 19 pieces -Crossbeams, length 2760 mm: 93 pieces -Crossbeams, length 1890 mm: 11 pieces -Dimensions/Quantity: see photo parts list -Submission/Price: complete -Transport dimensions: 6950/2250/H1460 mm Total weight: 4380 kg

Condition: good (used), geared motor, electric motor -Speed: 104 rpm Laodob A Rnbopfx Aifjd -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 17 mm -Protection class: IP 65 -Number: 5x geared motors available Price: per piece -Dimensions: 330/180/H140 mm -Weight: 7 kg

Condition: good (used), Year of construction: 2000, Chassis, electric motor, DC motor, drive motor, traction motor for order picking forklift -Manufacturer: Jungheinrich, chassis drive motor from order picking forklift type EJE-KmS -Drive motor: juli GF 104-Q3 24V 1.5 kW -Individual components: see photos -Wheel: 230 x 70 -Number: 2x chassis available -Price: per piece -Dimensions: 266/266/H610 mm Laodpoizc A Eefx Aifjd -Weight: 62 kg/unit

Condition: good (used), Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, inline pump MOVI -V 25/1Drive: 0.55 kW Lajdpof S Ncpofx Aifjd -Speed: 2840 rpm -max. delivery rate: m³/h -max. head: 39-24 m -Dimensions: 185/185/H555 mm -Weight: 22 kg

Condition: used, Gear motor, angular gear motor, electric motor Electric gear motor Laodpec Np A Uofx Aifod -Angular gear motor -Motor power: 0.55 kW -Speed: 104 rpm -Shaft diameter: 20 mm -Construction: B5 angle -Brake -Number: 2x motors available -Price: per piece -Dimensions: 485/240/H160 mm -Weight: 20 kg

Condition: good (used), Gear motor, offset gear motor, electric motor, three-phase motor, electric gear motor -Speed: 104 rpm Lsdpfx Ajd S Spajifjad -Power: 4 kW -Motor type: SK 112M/4 -Construction: B3/B5 -Shaft: Ø 30 x 70 mm -Protection class: IP 55 -Dimensions: 550/285/H260 mm -Weight: 49 kg

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 Lsdpfx Aioww Atzofsad -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece