Used Thickening Machine Three Side Planer for sale (82,760)

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on the thicknesser 250mm - max. thickness of workpiece on the side heads (3-sided) 110mm – from above: - ejectors - toothed infeed shaft - pressure pad Credpfezu Sgpsx Ab Dsg - planing shaft - pressure pad - smooth outfeed shaft - pressure pad at the output – from below: - guide strip - adjustable rollers in the lower bed, 2 pcs – from the rear: - side spindles + pressure pad, 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed settings - electric bed lifting - dust extraction port 2x110mm - overall dimensions (L/W/H) 1650x1500x1210mm - weight 1370kg ADVANTAGES – Polish production – shaft for 4 knives – used planer, very good condition Net price: 23,900 PLN Net price: 5,690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7665 Technical data: - Shaft width: 510 mm - Planing shaft (2 knives installed), 4-knife shaft - Maximum thickness of material for thicknessing: 200 mm - Maximum thickness of workpiece on side heads (3-sided): 100 mm – From above: - Anti-kickback fingers - Serrated feed roller - Planing shaft - Pressure beam - Smooth outfeed roller – From below: - Adjustable rollers in lower table: 2 pcs - Guide bar - Lateral pressure from the side – From the rear: - 2 side spindles + pressure units - Spindle height: 100 mm - Maximum spindle spacing: 510 mm Crsdpfxjztqtfo Ab Dsg - Spindle diameter: 30 mm - Spindle adjustment: left/right - Motor: 2 × 1.5 kW - Two feed speeds - Main motor: 7.5 kW - Extraction port: 2 × 100 mm - Overall dimensions (L/W/H): 1800 × 1250 × 1000 mm - Weight: 1,070 kg ADVANTAGES – Made in Poland – 4-knife shaft – Very good condition – Used planer Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may be subject to change)

Condition: used, Year of construction: 1969, Used machine Year of manufacture: 1969 Runs perfectly Max. working width: 170 mm Max. working height: 130 mm Csdpfx Aboxavtqo Derg 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th shaft: top Availability: short-term Storage location: Röllbach

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 8 Spindle arrangement: bottom, right, left, top, bottom, top, right, left Dust extraction nozzle diameter: 6 x 120 mm Infinitely variable feed rate adjustment: 4-24 m/min Feed via universal joints Power supply: 400 V Total power: 17 kW Overall dimensions: Length: 3050 mm Crodozgut Njpfx Ab Djg Width: 1200 mm Height: 1200 mm

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 7 Spindle arrangement: bottom, right, left, top, bottom, top, left Diameter of the dust extraction port: 7x120 mm Adjustable feed rate: 4-24 m/min Feed via universal joints Credpfx Abszgup Rs Deg Power supply: 400 V Total power: 17 kW Overall dimensions: Length: 2550 mm Width: 1050 mm Height: 1200 mm

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain Crsdpsdx Elmsfx Ab Deg bottom Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: excellent (used), functionality: fully functional, FOUR SIDE PLANER machine model FUTURA MODUL 4 220 second hand machine working conditions : excellent n.4 spindles ( n.4 indipendent motors ) CE mark : YES volt. 380/50 with tools : Yes . n.04 tools with interchangeable knives composition machine ( 4 spindles , 4 indipendent motors ) : 1° spindle : planer . motor power Hp 5,5 (Kw 4) 2° spindle : vertical right . motor power Hp 4 (Kw 3) 3° spindle : vertical left . motor power Hp 4 (Kw 3) 4° spindle : thickness planer . motor power Hp 5,5 (Kw 4) technical details : 2 speed feed . motor power Hp 1,3 / 1,7 (Kw 1 / 1,3) spindle rotation speed rpm 6000 feed speed : 8 / 16 mt./min max. useful working width mm. 220 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2300 lubrication system electric height adjustment . motor power Hp 0,25 (kw 0,2) total installed power: 18.6 HP (14 kW) instruction manual CE certification Cedpfx Abjw Dz T Hs Derg

Condition: good (used), maximum working width 600 mm maximum working height 200 mm Crsdpfx Aow Afiveb Dsg sides – interchangeable heads rollers in the table manual adjustment of side head spacing variable feed speed electric table adjustment multi-blade saw at the outlet with 11 kW motor side heads with 6.6 kW motors each total power 40.55 kW year of production 1991

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Cutting Capacity of Round Tube: Φ360mm Crodpjv D T H Tjfx Ab Djg Cutting Capacity of Square Tube: Φ360mm Max. Load: 1000kg Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Full Pipe Cutting available Standard auxiliary loading and unloading system loading, unloading, and cutting of 6m full pipes available Bevel Cutting Function available Bevel angle adjustable from 0-45° Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 1.511.030, functionality: fully functional, planing width: 240 mm, spindle diameter: 40 mm, number of spindles: 6, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 6 Min. planing width: 44 mm Max. planing width: 240 mm Min. planing height: 18 mm Max. planing height: 150 mm Infeed table length: 1,150 mm Spindle 1 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 2 Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 3 Crjdszxch Eopfx Ab Djg Spindle type: Vertical spindle Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 5 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Spindle 6 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 40 mm Planing cutter speed: 6,000 RPM Feed rate: Automatic Min. feed rate: 6 m/min Max. feed rate: 24.1 m/min Feed rate control: Stepless Conveyor motor power: 8.7 kW Conveyor drive: Cardan drive Diameter of feed rollers: 140 mm MACHINE DETAILS Control system: Schneider Voltage: 415 V Current consumption: 144.3 A Fuse rating: 200 A Connected load: 60 kW Diameter of dust extraction nozzle: 125 mm Lubrication system: Manual Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,800 mm Unladen weight: 2,000 kg Shipping packages: 1 unit

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: AB-216795, functionality: fully functional, planing width: 230 mm, spindle diameter: 40 mm, number of spindles: 5, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Number of spindles: 5 pcs. Min. planing width: 25 mm Max. planing width: 230 mm Min. planing height: 6 mm Max. planing height: 120 mm Infeed table length: 2,470 mm Spindle 1 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 2 Spindle type: Right Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 3 Spindle type: Left Motor power: 7.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 4 Spindle type: Top Motor power: 9 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 180 mm Spindle 5 Spindle type: Bottom Motor power: 5.5 kW Spindle diameter: 40 mm Planing cutterhead speed: 6,000 rpm Max. planing cutterhead diameter: 140 mm Feed rate: Automatic Min. feed rate: 5 m/min Max. feed rate: 25 m/min Feed rate control: Variable Conveyor motor power: 3 kW Conveyor drive: Cardan shaft drive Diameter of feed rollers: 140 mm MACHINE DETAILS Lubrication system: Manual Diameter of dust extraction nozzle: 120 mm Voltage: 400 V Current consumption: 57 A Csdpfjzxchlox Ab Dorg Fuse rating: 63 A Power: 10 kW Dimensions & Weight Dimensions (L x W x H): 4,150 x 1,650 x 1,750 mm Dry weight: 2,600 kg Transport packages: 1 pc. EQUIPMENT CE marking Documentation Cardan shaft drive Manual lubrication system

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015315, functionality: fully functional, planing width: 240 mm, number of spindles: 8, working height: 140 mm, TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 140 mm Infeed table length: 2,500 mm Feed drive: Cardan drive Lubrication system: Automatic Diameter of planing shaft: 40 mm Spindles Number of spindles: 8 pcs. Spindle 1 Spindle type: Bottom Tool available: Yes Spindle 2 Spindle type: Right Tool available: Yes Spindle 3 Spindle type: Left Motor power: 15 kW Tool available: Yes Spindle 4 Spindle type: Right Motor power: 11 kW Tool available: Yes Spindle 5 Spindle type: Left Motor power: 11 kW Tool available: Yes Spindle 6 Spindle type: Top Motor power: 15 kW Tool available: Yes Spindle 7 Spindle type: Top Motor power: 11 kW Tool available: Yes Spindle 8 Credjzxcfdspfx Ab Deg Spindle type: Bottom Motor power: 11 kW Tool available: Yes Feed system Manufacturer: H&M Max. infeed length: 250 mm Discharge system Manufacturer: H&M Max. discharge length: 760 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 20,000 x 2,400 x 2,200 mm Unladen weight: 6,000 kg Number of transport packages: 8 pcs. EQUIPMENT Tools for all 8 spindles Automatic lubrication system Electrical wiring diagrams Technical data Documentation CE marking

Condition: used, Year of construction: 2006, total width: 4,600 mm, total height: 1,830 mm, Dimensions (LxBxH): 217 x 460 x 183 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 Cjdpfx Aewnig Nob Dsrg - └ Spindle 3: - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Feed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Conveyor drive: Cardan drive - Diameter extraction nozzle [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total width: 1,550 mm, total height: 1,600 mm, Colour: Grey Empty weight: 2.100 kg Dimensions (LxBxH): 380 x 155 x 160 cm Four-sided moulder SCM Compact 23K Built in 2002 Min/max working height 120mm Min/max working width 230mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 100/180mm Input table length 2500mm CNC Program Engines 1st Spindle - Under 5.5kW 2nd/3rd Spindle - Left/Right 11kW 4th Spindle - Up 7,5kW Dimensions 3250x1550x1500mm (LxWxH), Weight 1800kg - Year: 2002 - Documentation available: Yes - CE certificate present: No - Serial number: 2639060025e - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 140 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 4: - - Spindle type: Top Cedpfxjwnhk Te Ab Dorg - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - Min. planing width [mm]: 23 - Max. planing width [mm]: 230 - Max. planing height [mm]: 125 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 120 - Feed motor [kW]: 1.3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 120 - Feed speed: Manual - └ Min. feed speed [m/min]: 4 - └ Max. feed speed [m/min]: 22 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 52 - Fuse [A]: 63 - Power [kW]: 36.0 - Transport dimensions: 3800mm x 1550mm x 1600mm (l x w x h) - Transport weight [kg]: 2100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, total width: 4,210 mm, total height: 1,830 mm, Colour: Blue Empty weight: 3.500 kg Dimensions (LxBxH): 190 x 421 x 183 cm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107707 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 2: Crsdpfxszl Tvaj Ab Deg - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 6: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 1800 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 4 - System/software: Memory System - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 130 - Options: Automatic feeding system - Feed speed: Automatic - └ Min. feed speed [m/min]: 4 - └ Max. feed speed [m/min]: 30 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 78 - Fuse [A]: 80 - Power [kW]: 36.0 - Transport dimensions: 1900mm x 4210mm x 1830mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 67,951 km, power: 346 kW (470.43 HP), first registration: 03/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 01/2027, color: orange, gearing type: automatic, total width: 2,550 mm, total height: 3,480 mm, loading space length: 4,935 mm, loading space width: 2,390 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, all wheel drive, compressor, electronic stability program (ESP), navigation system, Cab* Cab NN * Cab mounting: Comfort * Manual tilting mechanism * Integrated front access * Central locking with remote control * Tinted door windows, safety glass * 2 work lights on cab roof (right/left) * LED daytime running lights * H7 main headlights with stone guard * LED outline lights ----Electronics & Infotainment* MAN SmartSelect control unit * MAN Media System Advanced Navigation, 7" * Navigation map Europe & Russia * Online Traffic * Connectivity Board module * Smartphone integration * Digital tachograph with remote communication (DSRC) * Remote tachograph download * Preparation for Toll Collect toll system ----Driver Assistance Systems* ESP - Electronic Stability Program * ASR - Anti-Slip Regulation * Cruise control * Adjustable speed limiter * Emergency braking signal * ABS Offroad + off-road logic * MAN EasyStart (hill start assist) * Full braking assistant * Brake pad wear indicator ----Engine & Powertrain* MAN D2676 LFAI, Euro 6e * MAN TipMatic 12.28 OD automatic transmission * TipMatic driving programs: Performance, Efficiency, Offroad, Crawl mode * 2,400 Nm torque * Heated fuel and pre-filter * Open crankcase ventilation system * Stationary catalyst regeneration * MAN Idle Speed Driving * Rocking function * Transfer case MAN G173 with road/off-road gear * Electronic transfer case locking management (VSM) * Single-plate clutch 430 mm, reinforced * Auxiliary drive NH/4c, switchable, transmission-dependent ----Chassis & Axles* 6x6 all-wheel drive * Front axle 9,000 kg, driven, switchable * Rear axle 13,000 kg, driven * Rear axle 13,000 kg * Twin tires on rear axles & 2nd rear axle * Differential locks on rear axles * Leaf/air suspension (BL) * Parabolic spring suspension front axle * Air suspension rear axle and 2nd rear axle ----Braking System* Electronic Braking System (EBS) * ABS Offroad * High-performance engine brake MAN EVBec, multi-stage * Drum brakes on all axles * Electronic parking brake * Parking brake with spring-loaded actuators on rear axles * Acoustic reversing warning (can be switched off) ----Tires & Rims Front Axle:* 385/65R22.5 Continental CROSS TRAC HS3 * Steel rim 11.75x22.5, 10-hole Rear Axles:* 315/80R22.5 Continental CROSS TRAC HD3 * Steel rims 9.00x22.5, 10-hole ----Tanks & Batteries* 310 l diesel tank, right, aluminum * 60 l AdBlue tank, left * Lockable tank covers * 2 batteries, 12 V / 175 Ah * Mechanical battery main switch ----Mirrors & Camera* Electrically adjustable, heated exterior mirrors * Electrically adjustable curb mirror * Manually adjustable front mirror * Preparation for 2 cameras (one reverse gear-linked) ----Interior & Comfort* Textile seat covers Comfort Crodpfxszyxt Hs Ab Dog * Air-suspended driver's seat with lumbar support & shoulder adjustment * Seat climate control driver's seat * Driver's armrests * Storage space in seat console * Storage compartments in instrument panel * Cooler box with partition grid * Interior light, central * Entry lighting * Washable interior door panel * 2 storage boxes on rear wall ----Body - MEILLER tipping body D316 * Floor: Steel HB450, 6 mm * Side walls 800 mm, steel HB400 * Bordmatic on left * Rear wall 800 mm pivoting with automatic locking * Front wall 1,000 mm * Deflector front wall 650 mm * Steps on front wall * Recessed lashing eyes in the floor * 150 mm discharge chute at the rear * Axial pump MEILLER 275/1 * Hydraulic control in the cab * Contour marking reflective white/yellow ----Trailer / Interfaces* Ringfeder 5050 A trailer coupling * Fifth wheel coupling f

Condition: used, mileage: 445,745 km, power: 230 kW (312.71 HP), first registration: 01/1997, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2025, color: green, gearing type: mechanical, * Manual transmission * Meiller three-way tipper, year of manufacture: 2012 * Ringfeder drawbar coupling Crodpezyxr Aefx Ab Djg * Unladen weight: 8,460 kg * Main inspection (HU): 08/2025 * Safety inspection (SP): 02/2026 -----Internal vehicle number: 11247----Errors & prior sale excepted. WhatsApp support available! For questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp.

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 123-2001, functionality: fully functional, planing width: 260 mm, rotational speed (max.): 6,000 rpm, number of spindles: 5, planing height: 120 mm, roller diameter: 140 mm, TECHNICAL DETAILS Maximum planing width: 260 mm Maximum planing height: 120 mm Infeed table length: 2,470 mm Number of spindles: 5 Spindle 1 Spindle type: Horizontal spindle Motor power: 5.5 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 150 mm Spindle 2 Spindle type: Vertical spindle Motor power: 11 kW Spindle diameter: 140 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Csdpfozuwrkox Ab Djrg Spindle 3 Spindle type: Vertical spindle Motor power: 11 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 4 Spindle type: Horizontal spindle Motor power: 11 kW Spindle diameter: 120 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Spindle 5 Spindle type: Horizontal spindle Motor power: 7.5 kW Spindle diameter: 140 mm Planing cutter head speed: 6,000 rpm Maximum planing block diameter: 160 mm Feed and extraction Diameter of feed rollers: 140 mm Feed motor: 2.2 kW Diameter of extraction nozzle: 140 mm Feed drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Electrical data Voltage: 380 V Current draw: 84 A Fuses: 100 A Total power: 39 kW Dimensions & Weight Dimensions (L × W × H): 4,000 × 1,700 × 1,650 mm Dry weight: 2,500 kg Shipping packages: 1 EQUIPMENT Tools for all spindles included Documentation

Condition: used, Year of construction: 2004, operating hours: 3,142 h, total width: 2,400 mm, total height: 2,100 mm, Colour: Grey Empty weight: 5.000 kg Dimensions (LxBxH): 550 x 240 x 210 cm Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 102848 - Operating hours: 3142 - Number of spindles [pcs.]: 7 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 22 Csdpjzvcqzsfx Ab Derg - - Tool present: Yes - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Top - - Motor power [kW]: 30 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Bottom - - Motor power [kW]: 15 - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 3 - Max. planing height [mm]: 160 - Feed table length [mm]: 1000 - Feed roller diameter [mm]: 140 - Conveyor drive: Cardan drive - Lubrication system: Automatic - Diameter extraction nozzle [mm]: 160 - Options: Powered rollers in table, Powerlock - Feed speed: Manual - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 33 - └ Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 278 - Fuse [A]: 400 - Power [kW]: 128.0 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, mileage: 513,267 km, power: 228 kW (309.99 HP), first registration: 08/2006, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro3, loading space length: 4,200 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2006, Equipment: ABS, all wheel drive, crane, Stock No. 5883 MAN TGA 18.310 with front-mounted HIAB Type 111 BS-3 HIDUO crane with remote control / Meiller steel 3-way tipper body / 4x4 / AP axles 3rd and 7th synchronizer rings are worn!!! (Transmission) ----* Manufacturer: MAN * Type: TGA 18.310 4x4 BL * First registration: 08/2006 * Mileage: approx. 513,267 km * Transmission: mechanically shifted 8-speed split gearbox * Gross vehicle weight: 18,000 kg * Unladen weight according to vehicle registration: 11,350 kg * Payload: 6,650 kg * Axles: 4x4 all-wheel drive / AP axles * Wheelbase: approx. 4.00m * Suspension: front leaf spring, rear air suspension * Tires: 1st axle 385/65 R 22.5, 2nd axle 315/80 R 22.5 approx. 50% tread * Cab: Short cab / 2 seats * Horsepower: 310 hp / Euro 3 / L package * ABS * Color: Chassis black, cab and tipper body red * Internal dimensions of tipper body: Tipper body approx. 4.20m long x 2.45m wide x 0.60m high * Front-mounted HIAB Type 111 BS-3 HIDUO crane with remote control, year of manufacture 2006 * 3 hydraulic extensions * Maximum extension at 9.50m = 1,040 kg Cjdpfx Aezyflcob Dsrg * Short extension at 3.90m = 2,660 kg * 5th and 6th control circuits for grab * Two-shell grab * Hydraulic supports * Floor control on the left * Load hook * Meiller steel 3-way tipper body * Trailer hitch with 40mm pin and air, light, and hydraulic connections for trailer operation * Approx. 225 liter steel diesel tank on the right * 2 x front toolboxes on the left * Work lights * Rotating beacon * Chrome roof rack with spotlights * Roof horn * Cab rear wall with window * Sun visor * Heated driver's seat * Roof hatch * Electric windows and mirrors * Mirror heating * Cooler box * Radio * Cruise control * Engine brake * Differential lock * Exhaust pipe on the right, raised behind the cab German vehicle!! German documents!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the details. We assume no liability for errors, changes, or interim sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, mileage: 325,358 km, power: 370 kW (503.06 HP), first registration: 03/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: semi-automatic, emission class: euro3, total length: 7,200 mm, total width: 2,550 mm, total height: 3,400 mm, loading space length: 2,400 mm, loading space width: 2,380 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, all wheel drive, tail-lift, Mercedes-Benz 1850 V8 Actros 3Skipper + Bordmatik, all-wheel drive Wheelbase: 3.90 m Suspension: leaf spring Dautel 3-way tipper Length: 4.40 m Width: 2.38 m Height: 0.80 m + Bordmatik Credpszxvahsfx Ab Dog Equipment: + Remote control system with clutch + Trailer coupling We would also be happy to assist you with financing/leasing options through our partners. All information is subject to change without notice. Errors and prior sale are excepted.

Condition: used, mileage: 213,365 km, power: 160 kW (217.54 HP), first registration: 07/2007, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro5, total length: 6,950 mm, total width: 2,500 mm, total height: 2,750 mm, loading space length: 4,600 mm, loading space width: 2,355 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, soot filter, Mercedes-Benz 1222 Atego Meiller 3Skipper 4x2 Suspension: Leaf spring / leaf spring Wheelbase: 3.50 m MEILLER Type: 9 Year: 2007 Length: 4.60 m Width: 2.35 m Height from ground: 1.20 m Special equipment: Trailer brake 2-line, Trailer socket 12V / 13-pin, Trailer socket 24V / 15-pin, Audio system: Radio Truckline CC 65 / 70 incl. cassette player, Hands-free telephone system, Hydraulic power steering LS 6 / LS 8, Air dryer 1 chamber, heated, Crodpfx Abszxvabj Deg Rear window, Seats in cab: Adjustable passenger seat, Seats in cab: Center seat with safety belt, Voltage converter 24V / 12V 8 A Additional equipment: Emission standard EURO 4, Axle configuration: 4x2, Exterior mirrors electrically adjustable and heated, Battery 115 Ah, Dashboard, Roof hatch (steel), Differential lock rear axle, Cab: Tilting mechanism hydraulic, Cab: S (short), Suspension: Leaf spring / leaf spring, Generator 80 A, Urea tank (AdBlue): 25 L, Urea tank (AdBlue): Plastic, Rear axle H 4, Crown wheel 410, Interior filter: Pollen filter, Fuel tank: 105 L, Atego 2 model update, Engine 4.8 L - 160 kW diesel (OM 924 LA), Engine brake with constant throttle, Auxiliary drive MB 1C, Side underrun protection, Seats in cab: Driver's seat, standard suspension seat, Stabilizer rear axle reinforced (for extremely high load), Drum brake rear axle, Rear underrun protection fixed, Front underrun protection, Immobilizer, Permissible total weight 11.99 t We would be happy to support you in the area of financing/leasing with our partners. All information without guarantee. Errors and prior sale excepted.

Condition: used, Year of construction: 2007, machine/vehicle number: MR007003, For sale: A very complete Weinig Powermat 500 (year of construction 2007). Thanks to the increased planing capacity (300x160mm) and extensive mechanization, this is the ideal production line for professional woodworkers, carpentry workshops, or timber frame construction companies. Installation can be arranged upon consultation. Key specifications: - Large capacity: Maximum processing size of no less than 300 x 160 mm (ideal for heavy timber, joists, and wide parts). - Spindle arrangement (5 axes): Bottom (11 kW) – Right (7.5 kW) – Left (7.5 kW) – Top (11 kW) – Bottom (7.5 kW). - Including oscillating axis: Equipped with a moving spindle with an input measuring system. Enables efficient processing of boards with varying/tapering widths with minimal wood loss. - Combined spindle mounting: Equipped with a PowerLock quick-change system on both bottom spindles and the top spindle. Conventional mounting ø 40 mm side spindles. - PowerCom Control: Graphic touchscreen for quick profile changes and digital management of tool settings. - 1-Man Operation: Including automatic return system. Cedpfxozwv Eue Ab Dsrg - Including accessories: Supplied with straight planing heads (bottom jointing cutters) and an extra horizontal PowerLock axis. Machine manuals are available. Technical specifications: - Number of planing axes: 5 - Order of planing axes: B-R-L-B-B - Maximum planing width: 300 mm - Maximum planing height: 160 mm - Feed rate: 5-30 /min - Serial number: 109200

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Credpfolht Htsx Ab Dog Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Condition: used, Hard stone plate, granite plate, granite block, measuring cube Hard stone block, angle block, precisely machined on all sides The granite plate comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W x H: 1350 x 300 x 245 mm Credjh Uhq Dspfx Ab Djg Working height approx. 700 mm - 5 support blocks with leveling screws, approx. 400 mm - 8 threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 threaded bushings M16 - small chip on one plate edge Overall dimensions L x W x H: 1350 x 1350 x 300 mm Weight of the measuring plate: 1500 kg Weight of the granite feet: 100 kg Very good condition