Used Tree Shear Woodcracker C 350 for sale (59,054)

Condition: like new (used), functionality: fully functional, overall weight: 1,600 kg, first registration: 12/2024, Year of construction: 2023, Tree shear Woodcracker C 350 with tiltator and collecting unit. Adapter is Licufix SW 33 (if not needed, we can remove it). The machine is brand new, immediately available, and stored under cover. Itsdpfxox Hrr Ee Acpsn

Condition: excellent (used), Year of construction: 2011, first registration: 08/2011, Equipment: ABS, Mercedes CLS 350 AMG, Sail edition Year of manufacture: 06/2011. The vehicle has a completely new rear axle with nine supports, a new turbocharger, the automatic transmission has been flushed and all filters have been replaced, as well as new brakes and a new front spoiler. It has undergone a face-lift! Approximately 20,000 euros have been invested in the vehicle; it runs perfectly and has a lot of power! You are welcome to take it for a test drive with me and see for yourself! Itodpfxed Tt Amj Acpjn Oh yes, it has 322,500 kilometers, but it is in excellent condition! It can easily handle another 300,000 kilometers! Fuel consumption: 5-12 liters of diesel! If you have any further questions, please do not hesitate to contact me! Thank you in advance!

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Westtech Woodcracker C300 Felling Grapple / incl. ALBACH quick coupler / BRAND NEW / in stock & immediately available - Softwood cutting diameter (mm): 350 - Hardwood cutting diameter (mm): 300 - Grapple opening (mm): 1,430 - Shear opening (mm): 550 - Own weight (basic version – full equipment) (kg): 750 – 1,080 - Recommended main circuit flow rate (l/min): 70 – 150 - Recommended auxiliary flow rate (l/min): 45 – 60 - Recommended operating pressure (bar): 280 - Carrier vehicle operating weight (t): 12 – 18 Specification: - incl. Autospeed function - incl. ALBACH quick coupler We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and readily available. In our warehouse we offer a wide selection of Westtech products that are immediately available! Mr. Herden (Tel. ...) will gladly assist you. On request, we are happy to provide you with a financing offer. We are an official sales and service partner for: - Westtech - OilQuick - Holp - Magni telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. Isdpoyxkq Dofx Acpotn - JCB construction machinery - Mercedes-Benz - Iveco Furthermore, with 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the entire Westtech Woodcracker product range for you! Subject to change and prior sale. = More Information = New: Yes Net weight: 850 kg Suitable for: Forestry applications Contact Marius Herden for further information.

Condition: good (used), Year of construction: 2023, CNC turning machine Manufacturer: DMG Mori Machine model: CLX 350 V3 Control system: SIEMENS Slim Line Multi Touch Year of manufacture: 2023 TECHNICAL DATA Travel distances - C-axis, degrees: 360 Spindle - Spindle head - Bar diameter: (mm): 66 - Max. speed: (rpm): 5,000 - Drive power 100% duty cycle: (kW): 11 Iedoz Sa Svjpfx Acpstn - Drive power 40% duty cycle: (kW): 16.5 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: VDI30 Tailstock - Hydraulic, controlled via M-function EQUIPMENT FEATURES + C-axis + Through-hole chuck, diameter 65 mm (max.) + Direct measuring system for the X-axis + Chip conveyor + Electronic handwheel + 3-jaw chuck, diameter 210 mm (hydraulic) + DMG Mori IoT connector + Coolant spray nozzle, 5 bar + Hydraulic tailstock + Tool package - Chip conveyor not included Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), New Westtech CL260 Riskzone 50 m tree shear – quick-change system Pladdet CW10 – Woodcracker – Itsdpfx Ajygugqscpjn = Further information = Year of manufacture: 2026 Design year: 2026 Intended use: Forestry Damage: none Please contact Miguel Cubas for further information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 a.m. to 7:00 p.m.

Year of construction: 2017, condition: ready for operation (used), An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible. Ijdjynltkspfx Acpotn

Condition: used, Pressing force: 350 kN (punching e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the sheet metal shear Isdpfxexqqpho Acpetn Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Support table on the punching side with stop pins Assortment of tools is included in the price

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits Itodpfxjx D Skmo Acpsn • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Condition: used, machine/vehicle number: 008555, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Ijdpfxjz N Swvs Acpstn Maximum panel thickness: 50 mm Operating Units: 6 nr

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Itsdpoz Dgudsfx Acpjn Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,500 kg, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Itjdpfx Ajzt Ihmocpsn Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Iodpfez Iplmsx Acpetn Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2024, Manufacturer: BOGE Type: C 14 PMDR -350 Year: 2024 Pressure: 13 bar Free air delivery: 1.74 m³/min Motor: 11 kW Controller: BOGE focus control 2.0 Voltage: 400 V / 50 Hz Itedpfxez Svtgo Acpen Dimensions (W x H x D): 1890 x 1824 x 854 Weight: 475 kg

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 623 030, functionality: fully functional, volume flow: 10,000 m³/h, intake vacuum (max.): 350 mbar, suction capacity: 6,927 m³/h, intake manifold diameter: 350 mm, filter area: 50 m², noise level: 69 dB, actuation type: pneumatic, total length: 3,920 mm, total width: 1,610 mm, overall weight: 1,160 kg, SCHUKO Vacomat XP TWIN 350 Itodpfx Ajz Rmkmscpon

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Itjdpfx Ajz Ipvfecpen Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, System consisting of: 1 Welding robot Qirox QRC 350-E including control unit, programming handheld device, 24 V buffer, PC connection on the control cabinet side, 2 GB flash drive from a training system, in like-new condition, manufactured in 2023. Gas nozzle sensor, arc welding seam tracking, multi-layer welding technique, point editor, oscillating patterns, transformation. Qineo Puls 600 with Premium control module, wire feeder, torch hose package, welding torch MRW 510 evo, torch testing gauge, mechanical cleaning, pressure booster. Like-new floor track with a capacity of 20 kN, travel distance 12 m, robot is mounted on a C-shaped stand in a hanging position, manufactured in 2019, 135 operating hours. Itodpfx Aszu Shyocpsn 2 Rotary positioning device with counter bearing TC 5 kN (no operating hours), load capacity 1000 kg, clamping length 5.0 m. Connection control, 4 light barriers, 2 start pre-selection. Delivery date: upon agreement. The components are in stock and need to be assembled and tested. Warranty: 6 months.

Condition: good (used), Year of construction: 2016, 2x compressor units 10 bar, Boge, screw compressor, incl. compressed air dryer, compressed air tank with sound insulation hood – used –: Price per unit ex location (net): €4,950 (net) Manufacturer: Boge Model: C 15 LDR-350 Year of manufacture: 2016 Volume flow: 1.70 m3/min Final compression pressure: 10 bar Motor speed: 3000 rpm Motor power: 11 kW Isdpfx Ajwxw E Uecpetn Operating hours as of 16.04.2024: 25,929 / 27,938 (currently approx. 30,000 h and 31,000 h respectively) Compressed air dryer Type: DS18-2 / 575145405 Serial number e.g.: 400392250004 Min/Max refrigerant pressure: 1.3 MPag / 2.2 MPag Min/Max air pressure: 0.1 MPag / 1.6 MPag 230V Compressed air receiver: Manufacturer: BWB 306 169 Capacity: 350 L Max. operating pressure: 11 bar Max. temp.: 100°C Min. temp.: -10°C Test pressure: 16.5 bar

Condition: used, SNOL Type: SNOL 120/350 SNOL heating and drying cabinet up to 350°C Description: SNOL high-temperature drying cabinet 120/350 For industrial applications. Max. 350°C Internal volume: 120 liters Internal dimensions: 555x350x555 mm Itjdeziiutspfx Acpen 400 volts, 50 Hz, 6 kW Vertical air circulation via built-in fan, over-temperature protection Chamber made of stainless steel Door hinge on the right, includes two shelves Low power consumption Fast heating and cooling times Powder-coated housing RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Itedsxddamspfx Acpon

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 Itodpfx Asvta Rdocpon - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: used, CTS Type: C-40/350 Air-cooled climate testing chamber For sale is a professional CTS climate testing chamber, model C-40/350. This unit is designed for demanding environmental simulations in industry and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 3.5 K/min Cooling 4 K/min Heat compensation approx. 3500 W at +20°C approx. 2000 W at -20°C Climate tests: Temperature range +10°C to +90°C Humidity range 10% to 95% relative humidity Dew point range +5°C to 78°C Temperature deviation ≤ 1.0 K over time Humidity deviation ≤ +3.0% RH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Technical design: Refrigeration unit air-cooled, low-noise, fully hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load 150 kg / m2 Insert grid: Stainless steel, Surface area 620 x 600 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Control: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Ethernet interface Free switching channels for on-site test specimen control Itsdpfx Aezizmzscpsn Dimensions: Test volume 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating data: Electrical connection 400V 3/N, 50 Hz Rated power 7.1 kW Rated current 11.5 A Protection class IP 54 Sound pressure level

Condition: excellent (used), Year of construction: 2019, Wittmann Battenfeld EcoPower 110/350 / All-Electric Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 168 cc Clamping Unit: Clamping force: 110 t Tie bar spacing: 470 x 420 mm Platen size: 682 x 682 mm Ejector: electric Clamping unit: toggle lever Control system: UNILOG B8 - Touchscreen Additional features: Machine in excellent technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. 15,000 in automatic mode Total operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control system Ijdjz Iphzjpfx Acpjtn Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Screw: 45mm Core pulls: 1x Itsdpfxezx D Hpo Acpon Hot runner system: 6x Without conveyor belt

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 500 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, type of input current: three-phase, workpiece diameter between centers: 500 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 4,600 kg, Demonstration CNC cylindrical grinding machine with automation setup Brand OKAMOTO Model OGM-350 P NCIII Year of manufacture 2020 Control: Fanuc Oi Model D Operating hours: approx. 200 hours Technical specifications Maximum swing diameter: 320 mm Maximum distance between centers: 500 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Maximum workpiece weight: flange + chuck + workpiece: 40 kg Grinding wheel: Diameter x width x bore: 455 x 75 x 127 mm Wheel speed: Continuously variable Circumferential speed: 45 m/sec Grinding headstock (x-axis) Maximum travel: 300 Swivel angle: Non-swivel Workpiece table (z-axis) Travel: 870 mm Swivel angle: 0 – 10° Workhead Iedpfozn U S Iox Acpstn Fixed/Live Center Design MK 4 Taper Chuck Spindle Bore Diameter 20 mm Spindle Speed ​​10 – 500 rpm Swivel Angle: Non-Swivel Tailstock Tailstock Type: Manual Fine Taper Adjustment Quill Travel 30 mm MK 4 Taper Chuck Drive Power Grinding Wheel Drive 5.5 kW Total Power 20 kVA Dimensions/Weight Length x Width x Height approx. 3400 x 2330 x 1950 mm Machine Weight approx. 4,600 kg Standard Equipment: 2 Carbide Centers Full FANUC Keyboard with Radius Compensation for Creating ISO Programs Workshop Programming: Graphic Software for Grinding and Dressing Cycles with Teach-in Function GAP Eliminator Shoulder Positioning Constant Table coolant flush 3 color LED lamp Documentation Leveling screws and support plates Operating tool set Accessories Automation preparation Automatic door Automation interface Grinding wheel guard fully open when door is open Miscellaneous Signal lamp Tailstock with electric quill retraction 1 flange 1 grinding wheel Options upon request: Paper belt filter on request Clamping devices on request Commissioning and training on request (Commissioning by Okamoto is required for warranty purposes) Transport on request

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,821 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 242 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: SLIM Line, number of axes: 4, This 4-axis DMG MORI CLX 350 lathe was manufactured in 2018. It features a maximum workpiece diameter of 320 mm and a maximum machining length of 530 mm. The machine is equipped with a Siemens SLIM Line CNC and offers an X-axis travel of 242 mm, Y-axis travel of +/- 40 mm, and Z-axis travel of 540 mm. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 350 lathe we have for sale. Contact us for further details. • Maximum workpiece diameter: 320 mm • Maximum machining length: 530 mm • Bar capacity: 65 mm • Spindle hours: 236 h • Maximum spindle speed: 5,000 rpm • Spindle power: 16.5 kW • Spindle torque: 168 Nm • Y-axis: ±40 mm • C-axis: Yes • Driven tools: Yes • Counter spindle: No • Hydraulic tailstock • 12-station VDI40 turret with driven tools • 15" SlimLine operator panel • Siemens SINUMERIK 840D SL CNC with ShopTurn • USB and Ethernet connectivity • SMW Autoblok BH-D 250/1220 hydraulic 3-jaw chuck • Chuck diameter: 250 mm Iedpfx Aozx A Ilscpstn • Chuck bore: 66 mm • Hard and soft jaw sets included • 12 VDI40 tool holders • 6 Block Tool boring bar holders with internal coolant • PROGRESSline & Planonlight functions, including cycle time display, remaining time display and parts counter • Chip conveyor: No Technical Specification Counter Spindle No Driven Tools Yes