Used Unbekannt Cross Knife for sale (8,911)

Condition: good (used), Cross knife for meat grinder, robot knife -Cross knife: Robot knife 8 blades Lredpfxjvwl Rws Afwor -Type: WK400 -Recording: 95 x 65 mm -Wolf size: WK400 -Material: knife steel -Dimensions: Ø 375 x 60 mm -Weight: 9,4 kg

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Lrodpfszp H R Eex Afwer Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, I am offering a sand processing plant for sale, sourced from a company liquidation. Includes control system. The machine is currently still connected and was operational until the company closed. For self-dismantling. Additional photos and details, as well as a viewing appointment, are available upon request. Please feel free to contact me with your price offer. For self-dismantling. Dismantling can be arranged for an additional fee. Sale is ONLY to businesses. An invoice with VAT will be issued. Sold without warranty or guarantee. Lredpfxjzb Ef Hs Afwsr

Condition: used, Technical details: length: 4000 mm width: 1420 mm height over floor: 805 mm Payload: 10 t max. wheel diameter: 600 mm track width: 1000 mm control voltage: 80 V electric control: Ja mit Hand weight: 3,25 t Ledpfxszlxbus Afwjrr dimensions L x W x H: 4,0 x 1,42 x 0,81 m Battery type: Lead-acid Heavy-duty rail transport trolley *

Condition: used, Used Office Container Features and Technical Specifications: - Insulated steel container design - CEE high-voltage power connection - Electrical distribution panel - Multiple 230-V outlets - 2 ceiling lights - 3 plastic windows with roller shutters (2 at the front, 1 on the side) - Glazed entrance door - Low-maintenance flooring - Ready for immediate use - Dimensions: approx. 6,000 × 2,450 × 2,550 mm Availability: at short notice Lrjdpjznk Dgsfx Afwor Location: DE-63934 Röllbach

Condition: used, Industrial shredder or shredding line with carbide blades for shredding various materials such as wood, cardboard, glass fibre mats or similar, e.g. as a pre-treatment for recycling processes. The plant consists of two feed conveyors, the shredder, a transport fan and a soundproof enclosure. Technical data: - Total power: 31.7 kW Lodpfx Aszrx Hdjfwjrr - Shredder motor: 7.5 kW - Feed width: 550 mm - Feed height: approx. 25/75 mm - Fan: 22 kW / 10,800 m³/h

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 32 mm arm length ca. 920 mm Lredpfxoztf Aue Afwjr

Condition: good (used), amount 1 STK Dimensions (HxWxD) 300 x 190 x 190 mm diameter 60 mm -> Gear hobbing cutter with HSS cutting material -> Module 18 -> L1 -> 5° 48` Lodpfxszuumle Afworr

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die -Die cutting set: punch and die set, slotted die -Size: 13.0x40.0 mm -Matrix: 13.7x40.7 mm -Quantity: 2x punching tools available Lsdozr Eprspfx Afwjrr -Price: per piece -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Die cutting punch: Punch and die Ø 45 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.2 kg Lsdozr Ek Aspfx Afwjrr

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die Lrjdpfxjzr Exgo Afwsr -Die cutting set: punch and die set, slotted die -Size: 18.0x40.0 mm -Matrix: 18.7x40.7 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die, slot die, punch and die set slot die -Die cutting set: punch and die set, slotted die -Size: 20.0x40.0 mm -Matrix: 20.7x40.7 mm -Transport dimensions: Ø 90 x 80 mm -Weight: 2.1 kg Ledpjzr Ewvefx Afwsrr

Condition: good (used), Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Die: Punch and die Ø 46 mm / 1 13/16" -Transport dimensions: Ø 90 x 80 mm -Weight: 2.2 kg Ledpfx Afozr Ek Nsworr

Condition: good (used), amount 1 STK Dimensions (HxWxD) 280 x 190 x 190 mm diameter 60 mm Lrsdpfxozuumxe Afwsr HSS hob for high wear resistance

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm - Press cylinders: 6 Ljdpfxozryy Es Afwerr

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: Lrjdpfx Afjzryy Sewsr - Cylinders: 6 - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: ready for operation (used), Tool turret 5603923WZ SN:1285 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Lrsdpszu Hvxofx Afwer

Condition: ready for operation (used), Tool turret 5603923WZ SN:1286 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packing and shipping costs separately! Lodpfx Afjzu Hv Eowerr

Condition: ready for operation (used), Tool turret 5603923WZ with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for charges for packing and transport separately! Lsdpfxezu Hvrj Afworr

Condition: used, Items: extraction fan and pipework for woodworking or similar purposes. Lrodszrypaepfx Afwsr Technical data: - Motor: 30 kW - Fan inlet: 350 mm - Pipes: approx. 12 running metres - Pipe diameter: 320 mm

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm -Dimensions: see photos -Number: 4x mounting brackets available -Price: per piece Ljdpfx Afezav Hrewsrr -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece

Condition: good (used), Round brush, grinding wheel, chip brush, wire brush Ledpfxezuargo Afwerr -Round brush: Steel wire brush, 322 pieces -Outer diameter: 154 mm -Width: 40 mm -Bore diameter: 13 mm -Submission/Price: complete -Weight: 0.6 kg/piece

Condition: like new (used), amount 1 Palette Milling, drilling, and cutting tools for CNC and conventional machine tools. These include: -> Face mills — large milling heads with multiple indexable inserts, ideal for facing large surfaces. -> Cylindrical end mills — cylindrical mills with face and peripheral teeth, often used for grooves and contours. -> Disc cutters — thin, round cutters for cutting or for deep grooves. -> Drills — various twist drills for metalworking. -> Gear hobs — gear-like cutters for producing gear teeth. -> Tool shanks (SK/ISO/BT) — the tapered tool holders Lodpfx Afezhcf Nswerr on which the cutters are mounted. -> Collet chucks — holders for smaller tools, such as drill bits or end mills. -> End mills — smaller cutters with multiple cutting edges for contouring, pocketing, and 3D machining. -> Indexable-insert cutters — cutters with replaceable carbide inserts. -> Circular saw blades — round saw blades for cutting or slotting. -> Adapters and spacers — for adapting different tool holders. Complete package price

Condition: used, Year of construction: 2009, sheet width 3100 mm plate thickness / mm distance between columns / mm Swivelling bending machine 3100SK Folding bench Sheet metal bending machine Folding bench Lrjdpfx Aowbi Itefwer

Condition: used, functionality: fully functional, In this offer you buy a used 2-Knife Trimmer ‘SDD B4K/BT25 2-Knife Trimmer for Xerox’ Object of sale: 1 x SDD B4K/BT25 for various Xerox machines Counter readings: Total: Approx. 37,158 cuts Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Lodpfx Afsu S An Dowjrr The device has been tested for function A test brochure can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.