Hob cutter

Unbekannt

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 560 mm -Wall thickness: 16 mm -Length: 2880 mm Tjdpfjzfafhex Al Asc -Number: 3x steel pipes available -Price: per piece -Weight: 214 kg/m²

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm Tsdpfx Ajz N Amsl Asc cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: good (used), Roller conveyor, conveyor belt, roller track, pallet roller conveyor -Roller conveyor: Colli roller track, length 3 m -Rollers: 2x Ø 48 x 15 mm -Roller spacing: 100 mm, see photos Tjdpfx Aez Hw Sfsl Aoc -Quantity: 225 x roller rails available -Price: per piece -Dimensions: 3000/125/H80 mm -Weight: 14.2 kg/pc.

Condition: good (used), Tool trolleys, workshop trolleys, mobile workshop trolleys, drawer cabinets, welding machine trolleys, machine trolleys Todpfefnqhnsx Al Aoc -Width: 410 mm -Depth: 800 mm -Height: 1010 mm -Weight: 49 kg

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tjdpfeygx D Hex Al Asc Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: good (used), Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units Tedsiq Tiaopfx Al Ajc -Plumb block bearing: bearing block, inner Ø 50 mm -Holes: 160 mm spacing x Ø18 mm -Quantity: 3 pillow block housings available - Price: per piece -Dimensions: 210/50/H170 mm -Weight: 3.3 kg/piece

Condition: used, Technical details: floor-plate length: 4900 mm plate width: 1460 mm Tedpfx Aeval Hqol Aoc plate height: 300 mm Plate thickness: 300 mm weight of the machine ca.: 5,3 / pro Platte t transport dimensions LxWxH: ca. 4,9 x 1,5 x 0,3 / pro Platte m There are two plate fields for sale. Material cast steel T-slots according to DIN 650: a=58; h=108; b=110; c=50 mm Center stand 295 mm 6x through holes Ø 40 mm 2 groove areas are broken out on the face of one panel. *

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm Tsdpfx Alodmbrxe Aec total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: used, Technical details: Tjdpszlxbujfx Al Ajc length: 4000 mm width: 1420 mm height over floor: 805 mm Payload: 10 t max. wheel diameter: 600 mm track width: 1000 mm control voltage: 80 V electric control: Ja mit Hand weight: 3,25 t dimensions L x W x H: 4,0 x 1,42 x 0,81 m Battery type: Lead-acid Heavy-duty rail transport trolley *

Condition: used, Technical details: weight: Preis wird nach kg berechnet kg Various crane runways Pos. 1: Columns for crane runway 6x double T-beams L: 4.66 metres x W: 22 cm x H: 54.5 cm 1x double T-beam L: 4,71 meter x W: 21,5 cm x H: 55 cm Pos. 2: Crane runway 4x T-beams L: 7.16 metres x W: 22 cm x H: 54.5 cm 2x T-beams L: 6.25 metres x W: 22 cm x H: 54.5 cm 2x T-beam end pieces with stopper L: 6.93 metres x W: 22 cm x H: 54.5 cm Tjdpfju Nvkvjx Al Aec Pos. 3: Crane runway 4x T-beams L: 5.90 metres x W: 21.5 cm x H: 55 cm 2x T-beams L: 4.10 metres x W: 21.5 cm x H: 55 cm 2x end pieces with stopper L: 6.05 metres x W: 21.5 cm x H: 55 cm Pos 5: 10 pieces support beam length 6.400mm with TT profile 180 x 180mm weight 2420 kg Subject to prior sale. If still available. Please ask exactly for which beams you are interested. Subject to prior sale. If still available. Please enquire exactly which girders you are interested in. *

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Tedpfx Alsxmd Suj Aoc Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: used, approx. 74tdifferent strengthsmore information under "download" Todpfxodc A R Ue Al Ajc

Condition: used, Technical details: floor-plate length: 5600 mm plate width: 1890 mm plate height: 1. 335 2, 390 3, 370 mm Todpfx Aeu Rl Ugjl Aec weight of the machine ca.: 9,0 pro Platte t transport dimensions LxWxH: 5,6 x 1,89 x 335 (390) (370) m 3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distance 315mm Through-hole Number 23 Size D=130 i.D. *

Condition: used, max. wheel diameter 0-200 mm max. module 25 min. module 0,5 Tjdjtuxa Uepfx Al Ajc

Condition: used, Technical details: floor-plate length: 4500 mm plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 3,6 / pro Platte t Tjdpfxoval Hdj Al Aoc transport dimensions LxWxH: ca. 4,5 x 1,3 x 0,3 / pro Platte m There are 2 plates for sale. Material: Cast steel T-slots according to DIN 650 a=21; h=40; b=39.5; c=16mm; center distance T-slot to T-slot = 250mm *