Used Univap Evaporator for sale (352)

Condition: good (used), Year of construction: 2021, Univap TCM/E 5ED Evaporator with electric defrost unit 2021, Evaporator with electric defrost unit, comes with controls and external KD external fridge plant Kjdpfx Aceuliazsfedp

Condition: used, Year of construction: 2013, Model: UTAH Year of manufacture: 2013 Kdedpfxeqrpd So Acfjp Cooling capacity: 14,4 kW Dimensions: 1305 x 700 x 345 mm Weight: 66 kg.

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available. Kdodszcwitspfx Acfep

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  - Capacity: 100 L/h evaporation capacity at +22/+24 °C - Application: Concentration of musts, juices, and liquid products Kdedpoykrdbefx Acfop - Operating modes: Recirculation mode or direct concentration mode - Max. concentration: 55–70 °Brix - Daily output: 2,400 L evaporated / 24,000 L enriched to 10% - Utilities: - Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar - Connections: DN40 DIN, 50 mm hoses - Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  - Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction - Evaporation chamber | Stainless steel, full inspection access - Heat exchanger | AISI 316L tubular exchanger - Vacuum pump | Liquid-ring system with cooling recirculation - Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors - Pumps | Stainless-steel centrifugal and mono volumetric discharge pump - Vapor condenser | Stainless-steel surface condenser - Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks

Condition: good (used), Year of construction: 1985, functionality: fully functional, Equipment: compressor, Manufacturer: GEA / Laguilharre Kdedpeyvrtujfx Acfjp Year of construction: ~1985 4 stages – 6 tube bundles MVR + TVR evaporator Use as a pre-concentrator from 6 to 32% DS Use as (high) concentrator 9 to 50% DS Feed rate: 20,000 l/h whey Evaporation performance: 15,000 l/h Including pasteurizer with steam injection Electrical power of MVR compressor: 140 kW TVR steam consumption: 850 to 1,000 kg/h Pasteurizer: 300 kg/h

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Kdjdpfx Aceyvrwtsfep Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h

Condition: good (used), We are offering used evaporative coolers here. TECHNICAL DATA Manufacturer: Portacool Model: Pachr360 Functional Condition: used PRICE €2,350.00 net €2,796.50 gross, including VAT Stock: 5 units YOUR CONTACTS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the goods. This item is available for pickup. Delivery or shipping is possible for an additional charge. The additional costs depend on the delivery location and the scope of the shipment and can be requested individually from us. PROJECT DESIGN Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The price is per unit/net price, as stated in the product description (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, material handling technology, storage platforms, textile warehouses, as well as machines for retail, industry, and trades. We continuously offer you interesting used products from various manufacturers/brands at attractive prices. If you have any questions, please do not hesitate to contact us. Ksdey Eqduopfx Acfedp Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: as good as new (ex-display), Falling-film evaporator – unused – The machine consists of three units that need to be connected in series: - Evaporator (58 pipes), Length: 12.000 mm - Condenser (19 pipes), Length: 15.000 mm - Condenser (48 pipes), Length: ca. 15.000 mm All units are unused and made of stainless steel (AISI 304 / 1.4301). The evaporator was designed for the production of protein powder (dairy industry) and represents the final element of a drying chain. It evaporates the remaining water in the dryer and thus leads to a high concentration of the end product. Kjdpfx Acsd Hb Acefsdp Since the units have never been in use, they are in excellent quality. Sale without electrical components or control panel.

Condition: used, Used Pfaudler Balfour approximately 4.64 m2 stainless steel wiped film evaporator. Evaporator body approximately 700mm diameter X 2100mm straight side. Internal 1460 litre capacity rated full vacuum/1 bar design pressure at 0-160 °C. Jacket 250 litre capacity rated full vacuum/6 bar (5 bar with full vacuum) design pressure at 0-160 °C. Rotor belt driven by 5.5 kw 415 volt 3/50 1440 rpm motor via Flender model ZF80A gearbox rated 10.29/1 reduction ratio. Kdedpfx Acoyh Na Esfop

Condition: good (used), Morgana PC42 Evaporator Twin fan, ceiling mounted Kdsdpfx Aoqqhinjcfep

Year of construction: 2009, condition: ready for operation (used), A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible. Ksdpfx Aozdknqecfodp

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Kdjdpfx Acoynkbmjfsp Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: new, Air Cooler, Evaporative Cooler, Indoor Cooling Unit, Used Appliance Manufacturer: Govers Type: ET8 Year: 2004 Dimensions: 2260 x 830 x 260 mm In manufacturer's packaging, new device. Kodpfx Acjqvmzfjfodp

Condition: used, This listing is for a EuroClone Optichrome evaporation chamber, Optichrome® is a controlled evaporation chamber with automatic control of temperature and humidity for optimized chromosome preparations Kjdpfx Acoxzh Ivsfsdp

Condition: used, Item: A-9600-GEA-APV-Evaporator Used Evaporator Kjdpjvi Razsfx Acfodp Price by GEA & APV (SPX) Capacity 7.000 L & 12.000 L Dismantled, moved to stock

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: GACA FP071.1H_27 -FN and GACA FP 071.1H_37 FN, overall weight: 443 kg, total length: 4,820 mm, total height: 970 mm, total width: 865 mm, lamellar spacing: 7 mm, volume flow: 39,600 m³/h, cooling capacity: 27 kW (36.71 HP), operating pressure: 16 bar, Use glycol coolers . Worked in logistic vegetable and fruits wharehouse. Also is possible use area heating as convectors using hot-warm glycol received from refrigeration system. 3 fans cooler have 27kW capacity glycol in -5C out-2C. 2fans cooler have 22.7kW capacity with glycol in -5C out -2C Kdedpfxezk D Rle Acfop Selling 4pcs coolers with 3 fans and 5pcs coolers with 2 fans

Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system. New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai. The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions. Main equipment includes: Thin film evaporator / lecithin dryer Lecithin conditioning tank Finished product tank Hot water tank Lecithin cooler Vacuum pre-condenser Vacuum liquid seal tank Receiving / collection tanks Steam separator / steam distribution vessel Pumps, piping, valves and auxiliary equipment Electrical control cabinet / MCC Technical data: Capacity: approx. 1.5 TPD lecithin Process: vacuum drying / thin film evaporation Installed power: approx. 25.2 kW Product contact parts according to manufacturer specification Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design Typical application: soybean lecithin drying crude lecithin moisture reduction vegetable oil refinery lecithin processing lecithin concentration after degumming food / feed / industrial lecithin processing The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process. The equipment is new and unused. Manufacturer: Huatai. EU seller: Leonagra s.r.o. EU invoice possible. Delivery to Europe can be arranged. The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery. Inspection / video call with manufacturer can be arranged on request. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem. Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin. Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt. Hauptkomponenten: Dünnschichtverdampfer / Lecithin-Trockner Lecithin-Konditionierungstank Fertigprodukttank Heißwassertank Lecithin-Kühler Vakuum-Vorkondensator Vakuum-Flüssigkeitsverschlussbehälter Auffang- / Sammeltanks Dampfverteiler Pumpen, Rohrleitungen, Ventile und Zubehör Schaltschrank / MCC Technische Daten: Kapazität: ca. 1,5 TPD Lecithin Verfahren: Vakuumtrocknung / Dünnschichtverdampfung Installierte Leistung: ca. 25,2 kW Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien. Hersteller: Huatai. Verkäufer in der EU: Leonagra s.r.o. EU-Rechnung möglich. Lieferung nach Europa kann organisiert werden. Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich. Preis: nach Vereinbarung, zzgl. MwSt. Kjdpozivkbjfx Acfsdp

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: PJV111654, overall weight: 536 kg, total length: 6,500 mm, total height: 700 mm, total width: 1,050 mm, lamellar spacing: 7 mm, cooling capacity: 63.2 kW (85.93 HP), Used Goedhart VNS 66507 G evaporator on Freon with hot gas defrost. Complete with 6 Ziehl-Abegg fans - 50 Hz - 0,83/0,55 kW - 1330/940 RPM - diameter 500 mm and a total air flow of 42.380 m³/h. Kdodjv Ua Uxspfx Acfjp

Condition: used, Year of construction: 2007, Used Kuba SGL 56-F62 evaporator on Freon with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 15.800 m³/h. Kdodpfx Ajrlk Dkjcfep

Condition: used, Year of construction: 2007, Used Goedhart ZFB-1125612 evaporator on NH3 with hot gas defrost. Complete with 2 Süd-Electric MDA-H2065-NVN-U fans - 50 Hz - 0,75/1,25 kW - 1000/1300 RPM - diameter 560 mm and a total airflow of 19.200 m³/h. Kdsdjrlk Dgjpfx Acfep

Condition: used, Year of construction: 2017, Used Goedhart LLK.p 14x6-3006-50x50 evaporator for Freon/Glycol. Complete with 3 Ziehl-Abegg .A7P2 fans - 50/60 Hz - 1,0 kW - 1550 RPM - diameter 500 mm and a total airflow of 25.000 m³/h. Kodpfx Acsrlk Dcofodp

Condition: used, Year of construction: 2001, Used Helpman THOR 254-8-BH evaporator on Freon with hot gas defrost. Complete with 5 ATB AFT71/4A-7 fans - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 450 mm and a total airflow of 26.300 m³/h. Kdoderlk A Uspfx Acfsp

Condition: used, Used Helpman LEX 22 evaporator on Freon with electric defrost. Complete with 2 ATB RFT0,25/4-7 fans - 50/60 Hz - 0,25 kW - 1410/1710 RPM - diameter 457 mm and a total airflow of 9.320 m³/h. Kedpfx Aerlk Dyjcfedp

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Hettich CombiDancer Infrared Vortex-Evaporator with PoleStar Cold-Trap System (2005) For sale is a complete Hettich CombiDancer high-speed evaporation system (Hettich AG, Switzerland) — a premium parallel evaporator for rapid, gentle, and reproducible solvent evaporation, from light volatile ethers to high-boiling solvents such as DMF and DMSO. Decommissioned from a chemistry laboratory in fully functional condition with no known faults. Formally decontaminated (written certificate included). Never used in a biological or isotope environment. Highlights • Complete, ready-to-run system: CombiDancer + PoleStar cold-trap + diaphragm pump + rotary vane pump • 3–10× faster than conventional rotary evaporators; no sample balancing, no rotating parts in the chamber • Accepts large tubes, HPLC vials, Falcon tubes (15/50 ml), Eppendorf tubes, scintillation vials, microtiter/deep-well plates • Three independent heating zones (halogen IR, compartment heater, heated shaker plate) • PoleStar freezes solvents to –45 °C; rotary vane pump reaches 0.01 mbar for high-boiling solvents • Original paper manuals (CombiDancer & PoleStar) included CombiDancer Specs • Vacuum chamber: V4A stainless steel, Ø 360 × 180 mm • Vortex: 200–1,000 rpm • Temp: 20–80 °C • Vacuum: DN25 • Gas fittings: 2× 6 mm Swagelok • RS232 (VP, CT, PC) • 230 VAC / 1,800 VA • 765/930 × 695 × 470 mm / 78 kg PoleStar Cold-Trap Specs • Capacity: 3.3 L • Cooling: –45 °C • Vacuum: 0.01 mbar • Vessel: aluminium FEP-coated • Coil: V4A stainless steel • 230 VAC / 660 VA Kdsdpey Nmi Rsfx Acfsp • 520 × 430 × 530 mm / ~45 kg Pumps Included • Vacuubrand PC2003 VARIO + CVC 2000 controller (oil-free diaphragm, auto vapor sensing) • Vacuubrand RZ 6 (rotary vane, deep vacuum) Scope of Delivery • CombiDancer unit • PoleStar cold-trap • both vacuum pumps • mobile cart • original manuals • decontamination certificate Typical Applications • Analytical chemistry / SPE • combinatorial chemistry / HTS • pharma R&D • natural product & botanical extract workflows • food, cosmetics & life sciences

Condition: excellent (used), Available 8 evaporation for glycol water Ideal for cold storage warehouses and fruit and vegetable cold rooms Kdedpfx Acew Ulxtjfep