Used Used Pellet Plant 2.5 Tons Per Hour for sale (68,737)

Condition: like new (used), Year of construction: 2022, operating hours: 2,500 h, functionality: fully functional, Used pellet production plant, capacity 2.5 tons per hour complete with belt dryer. Hsdpfx Apjwk Htxsysnn

Condition: used, Little used MAN Rollo model E3262 L232 CHP Plant fuelled by natural gas, made in 2022 with only 2000 hours of use! Hnedpfx Aezcwiaopyen Engine manufacturer is MAN Rollo which is V12 configured with gross engine power output of 515 kW, 1500 RPM. The alternator is rated 415V, 3 phase and 50Hz. Output capacity is 435 kWel, 553 kWth.

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 scrubbing Hsdoy Ryrbspfx Apyonn - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: good (used), Year of construction: 2003, operating hours: 4,899 h, load capacity: 2,500 kg, lifting height: 3,700 mm, fuel type: electric, mast type: duplex, construction height: 2,480 mm, mileage: 4,899 km, Duplex electric forklift Brand: BT Year of manufacture: 2003 Hjdpfeymbakox Apyenn Capacity: 2,500 kg Lift height: 3,700 mm Overall height: 2,480 mm Equipped with sideshift 4,899 operating hours Battery: 2009 Comes with external charger Schedule an appointment for a test drive

Condition: used, Used olive oil production line with output capacity of 7 tons/hour. The equipment was made by Pieralisi in 2004 with last production run December 2025. Major equipment includes: - Leaf remover - Olive washing machine - Olive crusher - 700 litre Malaxer Panorama - 1000 litre Malaxer Panorama - Electric panels Hnsdpfeyhc Tzox Apyon - Decanter centrifuge Elephant S 470/2 - Vibrator filter for Elephant S 470/2 - Decanter centrifuge Jumbo 2 - Decanter centrifuge Major 3 - Vibrator filter for Major 3 - Separator 1500-2000 Full equipment list on request.

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v - Moisture (H20): maximum 3 ppm v/v - Total hydrocarbons (THC): Maximum 1 ppm Hnodpfsyhc Swox Apysn - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, featuring unique quality, honest workmanship, and at a fair price. Honest Work: We manufacture our systems ourselves directly in Poland. Only components such as gearboxes and motors are sourced from reputable manufacturers. All other parts are designed and built in-house, allowing us to meet every requirement individually. Hnsdpfx Aslt Ugtopyjn Fair Price: We produce in Poland and are transparent about it. Other competitors who label their product as 'Made in Germany' typically only assemble the machines in Germany and source most components from Lithuania. We let you benefit from the lower production costs, which allows our offer prices to often be 40% below those of competitors. These machines for pellet production are completely new to the market in this price/performance segment and are unique in Europe! WALW-Solutions machines are available exclusively through us! From systems for processing your own wood chips from firewood operations or joineries, to professional industrial pellet production from wood chips, straw, miscanthus, etc.—as well as manufacturing hay or straw cobs—we can provide the ideal solution for your needs. Our plants have capacities ranging from 150 kg/hour up to 5 t/hour and come equipped with all necessary components for a fully automated system. We offer tailored solutions for any input material and can integrate automation into existing systems as well. All machines and control units are equipped with components from Siemens, ABB, Schneider Electric, or similar leading brands. Please note: If you have a valid VAT ID, net purchases are possible! We look forward to your inquiry! For more information or direct interest, please contact me on my mobile at:

Condition: used, operating hours: 35,000 h, machine/vehicle number: LC581, Used Complete CSD Can Bottling Line – 14,000 cans/hour – Overview This second hand, complete CSD can bottling line is engineered for carbonated soft drink (CSD) beverage production and industrial packaging at up to 14,000 cans per hour on 250 ml format. The core of the line is an Ortmann Herbst isobaric can filler with 45 valves, paired with a Ferrum 706 6-head can seamer (can ends size 200). The scope includes depalletizing, can washing, filling and seaming, tunnel pasteurization, in-line inspection, coding, secondary packaging, palletizing, and end-of-line handling, providing a turnkey used bottling line solution. Technical Specifications & Performance Data Core Monoblock: Can Filler–Seamer Filler: Ortmann Herbst, isobaric, 45 valves (year: 1980) Seamer: Ferrum 706, 6 heads (year: 1982) Product type: Carbonated soft drinks (CSD) Nominal capacity: 14,000 cans/hour on 250 ml Can end: 200 end (industry size 200) Monoblock configuration: filler–seamer integrated block for minimized DO pickup Formats & Throughput Primary can size: 250 ml Line speed: up to 14,000 cph (format- and product-dependent) Process Equipment Included Kaeser compressor package with booster and two air receivers (p.y. 2010, start 2011) CIP station, three tanks (p.y. 2011) Syrup room with cooling system (p.y. 2011) Nagema mixer (p.y. 1992) Five ready-to-drink tanks, 100 hl each, steel with food-grade lining Beverage filter (p.y. 2011) Frezart can depalletizer (p.y. 2009, start 2011) Two can washers adapted to 250 ml (p.y. 2011) Hermis tunnel pasteurizer (p.y. 2015) Stratec can fill level inspector (p.y. 2000) Victor can printer / coder (p.y. 2020) Kisters packaging machine (p.y. 1993) Keber palletizer (p.y. 1997) Sita pallet wrapper (p.y. 2011) Complete conveyor system interconnecting all machines + two can accumulation turntables (p.y. 2011) Thermo-shrink labeling line for blank cans (p.y. 2015) Advanced Automation & Control Systems In-line quality control: Stratec can fill-level inspection for continuous monitoring and reject of out-of-spec containers Product identification: Victor industrial can printer for date/lot coding CIP capability: three-tank CIP station supports hygienic cleaning cycles for filler and product pathways Hsdpfx Apoyhbpzjyjnn Integrated conveying and accumulation: conveyors with two turntables provide smooth flow and buffer management to protect uptime Detailed electrical and controls documentation is available on request. Production Line Integration Capabilities Upstream Depalletizing of empty cans (Frezart) and transfer to washing Dual can washers adapted for 250 ml format Syrup room with cooling, beverage filtration, and mixing (Nagema) for consistent syrup preparation Compressed air supply package (Kaeser) with booster and storage Filling & Seaming Isobaric filling with 45-valve Ortmann Herbst filler ensures stable carbonation retention Ferrum 706 can seamer with 6 heads for reliable double seam integrity on 200 ends Downstream Hermis tunnel pa...

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and secure your price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. Hnsdpfx Apjiivq Ueyjn ————— ✅System contents ►1 unit - Large, gas-heated powder oven ►1 unit - Automatic powder coating booth ►1 unit - Small, electrically heated powder oven ►2 units - Room-type mono-cyclone manual powder coating booth ►6 units - Automatic powder coating guns ►3 units - Manual powder coating guns ►1 unit - Automatic powder recovery unit ►6 units - Mono-cyclone separators ►1 unit - Automatic control panel ►1 unit - Automatic bar movement system (speed controlled) ►2 units - Mobile platforms (speed controlled) ►8 units - Parking stations ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Suspension bars Our facility is located at Anhaltstr 30, 14943 Luckenwalde. You are welcome to schedule an appointment to view the machines. The plant has been in operation for 10 years. As the direct manufacturer, we can modify the machines according to your requirements by mutual agreement. It doesn’t fit your existing installation site? We can adjust the layout accordingly. Please check the system’s PDF file via the link below.

Condition: new, machine/vehicle number: A4E9A01932W, load capacity: 2,500 kg, lifting height: 4,350 mm, load center: 500 mm, mast type: triplex, motor manufacturer: Kubota, fork length: 1,220 mm, Equipment: CE marking, all wheel drive, sideshift, TECHNICAL SPECIFICATIONS - 2.5 tonnes - Fuel: Diesel Hjdpfx Ajmxkdhepysnn - Model: 4x4 - Engine: Kubota V2403 StageV - Fork length: 1220 mm - Mast: Triplex 4.35m AVAILABLE OPTIONS - Side Shift - OPS System - Suspended seat

Condition: used, Year of construction: 2000, machine/vehicle number: LC572, Technical Specifications & Performance Data Engineered for continuous olive oil extraction and seamless downstream packaging, this second hand line pairs traditional granite milling with modern separation. It can interface with a used bottling line for edible oil in PET or glass containers, supporting efficient industrial packaging workflows. Throughput: up to 2,500 kg/h (≈2.5 t/h) of olives, continuous duty Year of manufacture: 2000 Condition: READY FOR OPERATION Primary process stages: reception and elevating conveyors, washing/deleafing, four-wheel granite stone mill, malaxation (4 stainless tanks), vibrating screen, Barracane 4015 decanter centrifuge, Alfa Laval final separator (approx. 2000 L), centralized electrical panel Key components (sample): Various Equipment – Barracane 4015 decanter (2000), elevating conveyor, stainless malaxers with gear-driven paste pumps, Alfa Laval polishing separator Container types downstream: PET and glass as standard; compatibility with metal cans possible upon integration Typical oil packaging range downstream: 250 ml to 5 L (format depends on connected filler/capper) Materials in contact: food-grade stainless steel in malaxers, enclosures, and wetted parts Advanced Automation & Control Systems A centralized electrical panel manages motors, pumps, and malaxation temperatures for stable, repeatable extraction. The control architecture supports integration with bottling functions such as rinsing, filling, capping, and labeling for beverage production environments. Centralized start/stop, emergency stops, and status indicators Temperature control for malaxers to preserve organoleptic quality Variable-speed drives for conveyors and pumps to balance flow to the decanter PLC/HMI-ready I/O for line supervision, recipe management, and alarms Electrical supply: three-phase industrial standard (e.g., 400 V, 50 Hz) with protective breakers Production Line Integration Capabilities Designed for easy pairing with downstream oil bottling equipment, the line can feed buffer tanks or directly supply a used bottling line for PET or glass. Interfaces support quick connection to rinsers, volumetric or weight-based fillers, cappers (ROPP, screw), labelers, and date coding/traceability modules typical of industrial packaging systems. Sanitary tri-clamp and flanged connections for rapid hook-up Flexible flow control to match filler speeds and minimize bottlenecking Compatible with conveyors, accumulation tables, and case packing systems Format agility for common edible oil SKUs without major hardware changes Machine Condition & Maintenance History In READY FOR OPERATION condition, this second hand Barracane-based system shows robust mechanical integrity and clean stainless surfaces in process-critical areas. Regular servicing has preserved performance of the granite mill, malaxers, and separator set, allowing immediate deployment and straightforward commissioning within an existing plant. Hedpfx Aow Ag T Aepyjnn Operational Performance & Versatility The granite stone mill ensures gentle crushing, while controlled ...

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, control type: NC control, degree of automation: semi-automatic, actuation type: electric, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, hardened rollers, Pellet press for rent – suitable for wood, plastics (PE, PET), and agricultural by-products. Available: 4 kW (50–100 kg/h) or 22 kW (200–350 kg/h). Comes with various dies for different materials. Ideal for trial runs, pilot projects, and temporary production. Flexible rental periods, delivery, and support available. 👉 Henkes Industries GmbH Hsdpfx Apextwyreyonn

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Hnjdpfx Apoyb Rpdeyjn The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Year of construction: 2000, condition: used, Manufacturer: Tomal Type: PolyRex 3,0 Year built: 2000 Hnodeyg E A Aopfx Apyjn Content: 2 x 1,5 m3 Conveying / dosing of: Powdered Polymer # Chamber: 2 Control: Yes Material: Stainless steel Model: Vertical Dimensions: L 1.900/1.050 x W 1.800/600 x H 2.200/2.200 mm Empty weight: 300 kg Technical doc.: Yes Condition: Second hand Price: By request

Year of construction: 2026, condition: new, Screening plant for loading wood pellets, semi-mobile New production Screening capacity: 10 - 50 t/h (depending on design) consisting of: - Trough belt conveyor type TFB - Screening machine type ASM - Troughed belt conveyor type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Hnsdpfxjiux Tfe Apyjn Functional description and mode of operation: The pellets are fed into the trough belt conveyor (incl. bunker attachment) by means of a wheel loader. The pellets then reach the oscillating screen type ASM. The screening machine separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a trough conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2025, condition: new, Screening plant for loading wood pellets, stationary New production Screening capacity: 10 - 50 t/h (depending on design) Hjdjinkw Ajpfx Apyjnn consisting of: - Modul-Silo type M-300 (45 °) - Oscillating screen type ASM - Conveyor belt type MFB incl. magnetic separator - Veralde set // MODULFLEX loader - Pipe screw conveyor (option) - Dust extractor (option) Functional description and mode of operation: The pellets are fed into the modular silo by means of a wheel loader. The pellets then pass through the ASM oscillating screen. The screen separates the pellets into two size classes (pellets and dust). The screened pellets are loaded into the silo vehicle by means of a conveyor belt and loading equipment. Thanks to the integrated level indicator in the loading set, the system switches off automatically when the silo vehicle is sufficiently full. The dust fractions are discharged by means of a screw conveyor. To minimise the dust load, it is possible to equip the screening plant with an additional dust extractor type NE. The capacity of the screening plant (depending on the design) is between 10 - 50 t/h (70 m³/h) for wood pellets. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you. We look forward to your feedback!

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Hedpexlif Rofx Apysnn Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Hnodpfx Aeud Nx Hspyjn Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: used, functionality: fully functional, GRINDING PLANT capacity 1 t/h with roll press, sieving in 3 granulometries with nutation screen and horizontal screens. Hnsdpfex Agxvox Apysn Input: inlet grain size < 10 mm (marble, granite and quartz) with loading by big-bags on the included hopper. Output: 3 grain sizes (0-50, 50-100 and 100-300 microns). 70% of 100-300 microns, 15% of 50-100 and 15% of 0-50 microns. Storage with propulsion system for sending to silos (silos not included)

Condition: used, functionality: fully functional, GRINDING PLANT 8 t/h capacity with roll press, inclined sieve, n.2 wind separators. Hnodpfx Asx Agx Ajpyen Input: Input grain size

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, actuation type: electric, control type: PLC-controlled, degree of automation: automatic, PELLET PRODUCTION PLANT 2 TON/H COMPLETE WITH BELT DRYER Hnjdow Ebx Sspfx Apyen

Condition: good (used), Pump ready for operation Hedpfoycx Hgox Apysnn Capacity: 160 m3/h

Condition: used, Year of construction: 2018, functionality: fully functional, operating hours: 5,000 h, Continous Cast link belt Hardening & tempring furnace with online pre wash & post wash SCADA control fully automatic Hodpfxozbiqgo Apyjnn

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. Hnodpfx Apjq Nw Uqjyen 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: used, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 20240416011, fuel type: diesel, motor manufacturer: Perkins 1106A-70TAG2, General information Field of application: Construction Weights Empty weight: 1.825 kg Functional Generator capacity: 165 kVA Dimensions of cargo space: 305 x 113 x 173 cm CE mark: yes Other information Fuel consumption: 24,7 Liter per Hour at 75% Load Generator: Leroy Somer TAL-A44J Hedpfxjw Dag Eo Apyjnn Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 320 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Only 5 hrs. Traded-in from customer who needs more power. Warranty is still applicable. Used Generator Set.