Used Vario A1001 for sale (646)

Condition: excellent (used), Year of construction: 1969, Number: 901895 Godpfxsgm Txpe Aayebt Pressure: 20 bar Pump: 32 l/min Oil capacity: 125 l Dimensions: 1,400 x 420 x 1,500 mm Footprint: 800 x 420 mm Weight: 240 kg

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb Gbsdpfxezgci Ss Aayet NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, bore capacity in steel (diameter) 32,0 mm threading 22 M bore stroke 125 mm throat 280 mm morse taper 3 MK table: 450 x 380 mm / 14er Nut turning speeds 70 - 3.500 U/min feed 0,1 / 0,2 / 0,3 mm/U column diameter 110 mm weight 320 kg range L-W-H 500x800x2.100 mm total power requirement 1,1 / 2,2 kW characteristics Infinitely variable speed, ideal for setting the desired one Gbodpfx Aaexabiqjyst Cutting speed. Automatic tool ejector and Thread cutting device as standard. Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev Solid gray cast iron table with rotating and swiveling support surface T-slots in the machine base enable high workpieces to be clamped. Guaranteed concentricity = 0.02 mm, measured in the quill Hardened and ground gears ensure smooth running Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Key chuck 1 - 13 mm / B 16 - coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector - LED machine light - Digital speed display - First filling with Shell Tellus 46 - Height-adjustable protective cover

Condition: used, Year of construction: 2015, x-travel 570 mm y-travel 210 mm z-travel 365 mm turning speeds 50 - 6300 U/min spindle taper ISO 40 SK quill stroke 127 mm table: 915 x 200 mm table load 160 kg feed range 0,04/0,08/0,16 mm/min Gsdpfozv Ul Rjx Aayjbt total power requirement 2,2 kW weight of the machine ca. 850 kg. range L-W-H 1350 x 1300 x 2010 mm Multifunctional drilling and milling machine for professional use. Stepless speed control. Features electronic speed control and a digital position displayâ??features that impress in terms of quality, performance, and price. Heavy-duty, solid construction made of high-quality Meehanite cast iron. All axes feature adjustable dovetail guides. Forward and reverse rotation. High concentricity accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Main power switch, forward/reverse switch, emergency stop pushbutton. Digital speed display. Height-adjustable protective screen with microswitch. Central lubrication for spindle, nut, and guides; milling heads can each be swiveled 90° to the left and right; spindle head carrier rotatable by ±90°; manual spindle brake; includes Digital Readout (DRO), digital 3-axis position display (Xâ??Yâ??Z) For measuring positions

Condition: new, bore capacity in steel (diameter) 60,0 mm arm length 350 - 1.600 mm workpiece height max. 665 x 1.250 mm Gbodpfxexaa H Uj Aayet turning speeds 38 - 2.000 U/min spindle taper MT 5 MK base plate 960 x 1.760 mm threading 42 M quill stroke 325 mm total power requirement 4,0 kW weight of the machine ca. 3.800 kg. range L-W-H 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover - operating tool

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25-220/220-1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 185 mm Gbedpoxaau Esfx Aayot spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2420 kg. range L-W-H 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change tool holder with 4 inserts - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 30-550 / 550-3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 5.5 kW weight of the machine ca. 1145 kg. range L-W-H 2090 x 1050 x 1600 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE Gjdpjxaakysfx Aayjbt - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light - Change gears - Reducing sleeve - 2x centering tips - Chip back wall - Operating tool

Condition: new, turning length 1500 mm turning diameter 410 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52,0 mm turning speeds 30 - 3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 120 mm total power requirement 5,5 kW weight of the machine ca. 1400 kg. range L-W-H 2530 x 1000 x 1450 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm Gbedpexaaldofx Aayst - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light - Change gears - Reducing sleeve - 2 centering points - Chip back wall - Operating tool * Images show identical machine

Condition: new, bore capacity in steel (diameter) 50.0 mm throat 360 mm bore stroke 225 mm morse taper 4 MK table: 570 x 480 mm Gedpfx Aajxacc Ssysbt threading M 42 Stahl turning speeds 50-316 / 316-2200 U/min feed 0.08 - 0.50 mm/U column diameter 180 mm distance spindle /table max. 580 mm distance spindle/base plate max. 1185 mm total power requirement 3.0 kW weight 630 kg range L-W-H 1020 x 750 x 2340 mm Scope of delivery - Keyed drill chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MK 4 / 3, MK 4 / 2, MK 3 / 1 - Motorized table stroke - Coolant device - Touchscreen - Automatic tool ejector - Electromagnetic spindle feed - Thread cutting device - Initial filling with Shell Tellus 46 - LED machine light - Digital speed display - Digital drilling depth display - Height-adjustable protective cover

Condition: as good as new (ex-display), Year of construction: 2025, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min Gsdpfx Aoxaabroaysbt table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2170 mm Year 2025 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Condition: used, Year of construction: 2008, turning diameter over bed 320 mm turning diameter over slide rest 190 mm turning length 920 mm center height over bed 160 mm turning diameter in the gap 430 mm centre distance 920 mm bed width 181 mm digital readout DPA 2000 3 Achsen spindle bore Ø 38 mm turning speed range 10 - 2.500 U/min power requirement 1,5 kW Gbjdpfx Aaezzrdbsyjt 3-jaw-chuck diameter 160 mm taper in tailstock-quill MK 3 dia. of quill 32 mm quill stroke 100 mm voltage 400 V weight of the machine ca. 410 kg dimensions of the machine ca. 1,60 x 0,70 x 1,55 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 832432 - 3-axis digital display DPA 2000 - Constant cutting speed - Stepless speed control - Digital speed display - RÖHM 3-jaw flat spiral chuck - Face plate Ø 255 mm - Fixed steady rest - Rotating steady rest - Machine light - Rotating center point

Condition: used, mileage: 395,000 km, power: 77 kW (104.69 HP), first registration: 03/1992, overall weight: 6,600 kg, fuel type: diesel, color: red, gearing type: mechanical, total length: 6,800 mm, total width: 2,250 mm, total height: 2,700 mm, number of seats: 6, * Differential taxation according to § 25a UStG (German VAT Act) * Doka with 6 seats * Manual transmission * Rotating warning lights * Thoma box body * Pump not functioning * Tow hitch, 2.8t * Unladen weight: 6,600 kg * Top condition WhatsApp: Gjdpfjzz T Axjx Aaysbt Errors and prior sale excepted!! Sale is made excluding any warranty!! - We speak Russian - We speak English - We speak Polish - We speak Spanish - ????? ?????

Condition: excellent (used), mileage: 302,332 km, power: 96 kW (130.52 HP), first registration: 02/2008, fuel type: diesel, tire condition: 75 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, total length: 7,000 mm, total width: 2,500 mm, total height: 2,800 mm, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - 1 fuel tank - Airbag - Armrest - Beacon(s) - Day Cabin - Disc brakes - Front suspension: Leaf - Open roof - Rear suspension: Leaf = More information = Axle configuration Tyre profile: 75% Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels Weights Gbedpfx Aaszph S Royjt Empty weight: 4.560 kg Carrying capacity: 2.940 kg GVW: 7.500 kg Maintenance, history and condition APK (MOT): tested until 02/2027 Technical condition: very good Visual appearance: very good

Condition: used, mileage: 213,671 km, power: 95 kW (129.16 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,990 kg, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 5, Year of construction: 2010, Equipment: ABS, parking heater, soot filter, Equipment: * Body/superstructure: Mixed panel van, high-roof, * Passenger compartment (double cab), * Auxiliary heater (water), * Timer for auxiliary heater * Additional heat exchanger in double cab * Trailer coupling: ball hitch 3,500 kg * Co-driver's double seat, * 2-seater bench in the cab area * Passenger compartment with sliding door on the right, * Hinged doors (opening angle 270 degrees), Technology: * Audio system: Radio Truckline CD 65 / 70 * Rotating beacon left/right, Safety/Environment: * Stabilizer, front and rear axle, reinforced, * Suspension: front and rear axle, reinforced leaf spring, * Emission standard EURO 5, Other: * First delivery in Germany * 1 previous owner, * Suspension: leaf spring / leaf spring, * Wheelbase 3,700 mm Gbsdpfxozy S T Hs Aayst * Engine 4.3 L - 95 kW Diesel (OM 904 LA), * Permissible total weight 5.99 t Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen motorway junction. NutzfahrzeugZentrum Behnke constantly offers approximately 200 vehicles in the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will be happy to prepare an individual offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, in price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Condition: used, mileage: 213,673 km, power: 95 kW (129.16 HP), first registration: 04/2010, fuel type: diesel, overall weight: 5,990 kg, color: yellow, gearing type: mechanical, emission class: euro5, number of seats: 5, Year of construction: 2010, Equipment: ABS, parking heater, soot filter, Equipment: * Body/Structure: High-roof panel van * Passenger compartment (double cab) * Auxiliary heater (water-based) * Timer for auxiliary heater * Additional heat exchanger in double cab Gsdpfszy S Tyex Aayobt * Trailer hitch: ball-type, 3,500 kg * Double passenger bench seat * 2-seat bench in double cab area * Passenger compartment swing door on the right * Rear wing doors (opening angle 270 degrees) Technical Details: * Audio system: Radio Truckline CD 65 / 70 * Rotating beacon, left/right Safety/Environment: * Reinforced stabilizer, front and rear axle * Suspension: Reinforced parabolic springs front and rear axle * Emission standard EURO 5 Miscellaneous: * First delivery in Germany * 1 previous owner * Suspension: leaf/leaf * Engine 4.3 l – 95 kW diesel (OM 904 LA) * Gross vehicle weight: 5.99 t Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke continuously stocks approx. 200 units in vans, commercial vehicles, and construction machinery. We offer you ongoing attractive financing options with special favorable terms. On request, we are happy to provide you with a customized offer! Trade-in of your commercial vehicle/construction machine is welcome. If a new TÜV inspection is required, we are happy to provide a quote from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle is possible by our external partners for an additional charge. The information provided in ads, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for errors in typing or data transmission. Listed features may need to be verified separately. Subject to errors and prior sale.

Condition: used, mileage: 136,000 km, power: 100 kW (135.96 HP), first registration: 10/2004, overall weight: 7,500 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro3, Year of construction: 2004, number of seats: 5, Equipment: ABS, crane, electronic stability program (ESP), MAKE: MERCEDES BENZ TYPE: VARIO 814D TIPPER WITH PALFINGER CRANE YEAR: 2004 CE MARKED: YES OPERATING HOURS: 136,000 km TIRES/UNDERCARRAGE: 60% POWER: 100 kW ENGINE: MERCEDES 4.3 WEIGHT: 7500 KG OPTIONS: MANUAL GEARBOX DOUBLE CAB 5 SEATS 7500 KG MAX. WEIGHT DIESEL EURO 3 PALFINGER PC1500 2 UNITS IN STOCK KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN Gbedpfx Aszdm Akeayjt THE NETHERLANDS VAT ID: NL864089764B01

Condition: new, Year of construction: 2025, Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 25 cycles/minute; conveyor belt speed : 0-13m/min; cap diameter: customized; power: 220V, 3.5kW; compressed air: 3-5bar, 0.1m³; materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic; machine dimensions and weight: L1450xW850xH1600mm, 350kg; Conveyor belt dimensions: Length approx. 2200mm (may be adapted), width approx. 110mm (customized). Gbsdpfjv Nk Ulsx Aayot That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic filling and sealing machine for filling cups or containers, sealing with foil and capping with a hard plastic/hard tray lid. The rotary filling machine is suitable for various product types from liquids, pastes and powder to granular bulk materials such as yoghurt, dessert, sour cream, finger food sauces, smoothies, solid and dry foods such as rice, nuts, cereals, instant noodles and fresh foods such as sauerkraut, etc. The dosing unit is selected accordingly. The Shape, dimensions and material of the cups and lids can be customized (within the range). Automatic operation from feeding of cups, filling, opening of cups, sealing with film, capping with a lid and outfeed of the cups / containers. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling volume: customized; cup/container dimensions: customized; number of filling heads: max. 2; product contact parts made from SUS 304; current: 220/380 V, 3kW; machine dimensions: approx. L1200xW1200xH2000 mm; weight: approx. 800 kg. Gbsdev Nkzlopfx Aayst Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Rotary filling machine to fill liquids, pastes, powder, bulk goods into pre-made cups and sealing them with film. The machine can be equipped with a module for capping the cups with a hard plastic/hard shell lid (at a surcharge). The AMTEC filling and sealing machine can handle different cup types, shapes and dimensions and is flexible in the type of product to be filled. The product must only have flow properties such as yoghurt, dessert, sour cream, finger food sauces, smoothies, solid and dry foods such as rice, nuts, cereals, instant noodles and fresh foods such as sauerkraut, etc. Automatic operation from feeding of cups, filling, opening of cups, sealing with foil (capping with a lid, optional), collecting of cups / containers. The dosing unit (e.g. volumetric pump with an external tank, auger filler, etc.) is included. Easy operation due touch screen monitor. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling volume: customized; cup/container dimensions: customized; number of filling heads: max. 2; film type: suitable for sealable mono and composite films; product contact parts made from SUS 304; current: 220/380 V, 3kW; machine dimensions: approx. L1100xW1100xH1983 mm; weight: approx. 800 kg. Gbsdpev Nkzrsfx Aayjt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. With two twist-off heads the rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 17 cycles/minute (corresponds to max. 35 bottles/container per minute); conveyor belt speed can be adjusted accordingly: 0-15m/min; bottle diameter: two ranges: a) 30-85mm, b) 80-150mm; lid diameter: customized; adjustable height of the twist off heads: 50-180mm; vacuum degree: -85kpa; materials used: mainly stainless steel 304; protective screens* and links of the conveyor belt are made of plastic; machine dimensions: L1800xW660xH1700mm; weight: 650kg. * The machine photo shows an open machine without protective covers and safety doors for a better illustration. A closed machine is delivered with protective doors and protective covers. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gjdpev Nk U Ejfx Aayjbt

Condition: new, Year of construction: 2025, Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. Two containers can be capping per cycle and ensures a higher output per min due to the two screwing device heads. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; conveyor belt speed: 13m/minute; cap diameter: customized; power: 220V, 3.5kW; compressed air: 3-5bar, 0.1m³; materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic; machine dimensions and weight: L1450xW850xH1600mm, 350kg; Conveyor belt dimensions: Length approx. 2200mm (may be adapted), width approx. 110mm (customized). Gjdpev Nk Urofx Aaysbt Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. 1 head rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 20 cycles/minute; conveyor belt speed can be adjusted accordingly: 0-15m/min; bottle diameter: two ranges: a) 30-85mm, b) 80-150mm; lid diameter: customized; adjustable height of the twist off heads: 50-180mm; vacuum degree: -85kpa; materials used: mainly stainless steel 304; protective screens* and links of the conveyor belt are made of plastic; machine dimensions: L1800xW660xH1700mm; weight: 650kg. * The machine photo shows an open machine without protective covers and safety doors for a better illustration. A closed machine is delivered with protective doors and protective covers. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Gedpfx Aov Nk Uxsayobt

Condition: new, Year of construction: 2025, New model Auto Rotary Plastic Container Feeding, Filling, Sealing and Capping Machine for larger cup/container sizes. - Functions: The cup/container stacks are being put manually into the vertical storage device. Each cup/container will be picked automatically and transfered to the filling station (dosing unit is optional). Film is supplied to seal the cup/container before a capping unit closes it with a cap. Finally outfeed of the finished cup/container. - Stainless steel version (SS304), nitrogen filling device included, heat sealing system (0-300°C), film cutting depending on box shape. Servo motor control, OMRON PLC with Touchscreen, OMRON temperature control. - Specifications: max. speed of the machine in neutral: 20 cycles/minute; power 220V, 1.5kW; compressed air: 6bar, 1.2m³/min; machine dimensions and weight: depending on final customized configurations. Gjdpfx Aaev Nky Usyjbt That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, mileage: 293,000 km, power: 175 kW (237.93 HP), first registration: 11/2012, fuel type: diesel, overall weight: 12,500 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, gearing type: automatic, emission class: euro5, Year of construction: 2012, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, soot filter, * Unimog U 400 Mulag forestry equipment * First registration: 11-2012 * Vario Pilot steering system * Automatic transmission * EURO 5 emission standard * Operating hours: 14,255 h * 4x4 all-wheel drive Godpezz E E Sefx Aayebt * Combination mowing unit Mulag MKM 700 * Mulag verge mowing unit MRK 300 * Air conditioning * More pictures and videos available via WhatsApp * Information without guarantee, subject to prior sale.

Condition: excellent (used), mileage: 330,192 km, first registration: 02/2000, fuel type: diesel, tire size: 225/75 R16, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, suspension: parabolic leaf (spring), number of seats: 2, total length: 6,150 mm, total width: 2,200 mm, total height: 3,100 mm, Year of construction: 2000, Equipment: airbag, power assisted steering, = Additional options and accessories = - Leaf springs - Passenger seat = Remarks = TRANSPORT TO ANTWERP 390 EURO = More information = Tyre size: 225/75 R16 Suspension: parabolic suspension Front axle: Steering Rear axle: Double wheels Empty weight: 3.140 kg Carrying capacity: 3.460 kg GVW: 6.600 kg Gsdpezw Hd Uofx Aaysbt Technical condition: very good Visual appearance: very good