Used Variofit Pl-150.010 for sale (5,066)

Condition: used, Plate trolley as a welded construction made of steel used Nedpfx Aewkbayohzsct one-sided loading area made of plywood 5° incline Side bar height: 915 mm Trolley powder-coated RAL 5010 gentian blue permanent or surface-protected impact and scratch-resistant tires made of thermoplastic rubber on plastic rims with precision deep groove ball bearings, gray, "no marks" thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm)200 x 40 Load capacity (kg)500 Weight (kg)47.5 Dimensions (WxDxH, mm)1500 x 680 x 1200 Availability: short term Storage location: Flörsheim

Condition: refurbished (used), Year of construction: 2017, Vutek H2000 UV Hybrid Printer Ncodoyzg Tyopfx Ahzet fully refurbished with 3-month warranty Colors: 6C CMYL LCLM, 2 White Resolution: 1000 dpi with 7pl Ultradrop Print width: 205 cm, print height: 5 cm Speed up to 90 m²/h

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed Ncjdpferxcu Sex Ahzst - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: excellent (used), Variofit pallet collar, type 65, for Euro pallets, usable height 1200 mm, stackable up to 3 times. Multiple sets available. Ncsdpfx Ahjylknnszot

Condition: good (used), Technical data for the pallet rack traverse: Racking system: Bito Ncodpfx Aenfvnuehzjt Type: PL 38 Included in delivery are: 01x pallet rack traverse, used Material color: blue box profile: 127 x 50 mm type of truss: PT36.127SN agraffe: 3 HK (hooks) clear width: 3.600 mm max. load per truss pair 2.400 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Condition: good (used), Technical data: Manufacturer: BITO Type: PL 38 (Adjustment grid: 75|75 mm) Included in delivery: Ncedpfx Ahji Ema Eszst 01 x console, used Material color: sendzimir galvanized Opening dimension: 47x51 mm 02 x nut M8 02 x washers Ø 8,4 02 x screws M8x20

Condition: used, Technical data for the frame profile: Shelving system: Bito Type: PL 38 The scope of delivery includes: 01x frame profile, used Material color: sendzimir galvanized Frame profile: P 20 Nsdpfx Ahjufw Acezjct Profile dimensions: 90 x 65 x 2.0 mm Frame height: 2,475 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: good (used), Technical data for the pallet rack upright: Racking system: Bito Type: PL 38 Included in delivery are: 01x pallet rack upright, used material color: sendz. galvanized type of upright: P 20 upright profile dim.: 90 x 65 x 2.0 mm Ncsdpfxsnfvlyo Ahzet Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 4.800 mm high 900 mm deep Note: The yellow upright protectors are not part of the delivery delivery scope, but can be purchased as an option.

Condition: good (used), Technical data for pallet rack beam: Racking system: Bito Type: PL 38 Included in delivery: 01x Pallet rack beam, used Material colour: blue Box profile: 110 x 50 mm Beam type: PT36.112LN Connector: 3 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 1,900 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Ncsdpfsw Dd Srjx Ahzst Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Transport or shipping beyond this is subject to additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, VARIOfit Pallet Collar for Euro Pallets – Stackable Rack, used 🧰 Product Features • Manufacturer: VARIOfit • Item number: pa-080.007 • Material: Steel • Condition: used • Colour: blue • External dimensions: 1260 x 860 mm • Internal dimensions: 1125 x 800 mm • Frame height: 1200 mm • External height: 1410 mm incl. pallet • Load capacity: 750 kg • Weight: approx. 25 kg • Stackable: yes, stackable 3 times • Collapsible: yes • Pallet: not included 💰 Price: €89 net plus VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available Nsdpfx Aox Ezi Rehzoct • Inspection and collection: possible at any time by appointment Constantly over 5,000 linear metres of pallet racking from various manufacturers in stock (Subject to changes and errors in technical data, specifications, and prices as well as prior sale! Please see our terms and conditions; all prices excl. VAT ex warehouse.)

Condition: used, axle configuration: > 3 axles, first registration: 06/2024, suspension: hydraulics, tire size: 245/70R17.5, color: red, Year of construction: 2024, Broshuis 3ABSD-PL + 7ABSD-PL / 2 30,000 kg neck load. 3-axle dolly – 478 cm. 7-axle bed – 1266 cm. Extendable: 890 cm + 910 cm. Total length: Hydraulic double ramp. Loading width: 274 cm / wideners: 320 cm. = Further Information = Axle configuration Tire size: 245/70R17.5 Njdey T Ntgopfx Ahzoct Brakes: Drum brakes Suspension: Hydraulic suspension Front axle: Double tires; Steerable Center axle 1: Double tires; Steerable Center axle 2: Double tires; Steerable Center axle 3: Double tires; Steerable Center axle 4: Double tires; Steerable Center axle 5: Double tires; Steerable Center axle 6: Double tires; Steerable Center axle 7: Double tires; Steerable Center axle 8: Double tires; Steerable Rear axle: Double tires; Steerable Weights Unladen weight: 39,540 kg Payload: 135,460 kg GVW: 175,000 kg Financial information Price: On request Identification Model number: 3ABSD-PL + 7ABSD-PL PENDEL / EXT = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We strive to provide accurate information, but no rights can be derived from the texts provided.

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Ncjdsfiqgropfx Ahzet Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end With over 60 years of experience

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Njdpfxjfirx Ts Ahzsct Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end D9hnyc97o With over 60 Yes

Year of construction: 2024, condition: new, Machine dimensions: - (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm, - Width with console: 7,700 mm. - Length with filter: 11,000 mm Technical details: - Max. sheet size: 4.000 x 2.000 mm - cutting speed: 12 m/min. - positioning accuracy: ± 0,1 mm - Repeat accuracy: ± 0.1 mm - Power (Hypertherm XPR 170 XD Optimix): 170 A - Cutting area: - Unalloyed steel, piercing, argon: 40 mm - Unalloyed steel, piercing, air: 35 mm - Unalloyed steel, separation cut: 60 mm Ncodpfx Asdyfwkehzst - Alloy steel, hole piercing: 22 mm - Alloy steel, cut-off: 38 mm - aluminium, hole piercing: 25 mm - aluminium, separation cut: 38 mm Basic equipment: - Control: Durma Aurora CNC controller - Truehole Standard - Sheet metal measurement by laser - Burner height control - AC servo motors for X and Y axis - Software: Lantek, or Metalix Cad/Cam software with Autonesting - 50 pre-programmed part geometries for easy and quick modification. - consumption kit (burner nozzles, etc.) - Plasma torch - ignition console - Remote - Control: Remote maintenance options are included: - Hypertherm XPR 170 XD + Optimix + automatic gas control - Filter for HPR 170 XD - Safety system with circumferential safety wire - Oxyfuel torch with sensor - Plasma torch - demolition system - Air dryer

Condition: good (used), Year of construction: 1998, feed length X-axis: 1,180 mm, feed length Y-axis: 644 mm, feed length Z-axis: 480 mm, table length: 1,000 mm, table load: 1,000 kg, table width: 595 mm, power: 15 kW (20.39 HP), X - Travel: 1180mm Y - Travel: 644mm Z - Travel: 480mm Table Length: 1000mm Table Width: 595mm Table load: 1000 KG Feed rate X-Axis:30000mm/min. Feed rate Z-Axis:30000mm/min. Power: 15kW Length: 4800mm Width: 2500mm Nedpfxjwrx Sce Ahzect Height: 2700mm Weight: 8000kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 230 V, DGUV certified until: 06/2027, input frequency: 50 Hz, electrical fuse: 10 A, power: 0.5 kW (0.68 HP), Planetary mixer mixer Model: PL 10 sophisticated technology ... already proven many times! simple manual operation 3 transmission gears 1 stainless steel kettle 10 liters 1 flat beater 1 dough hook 1 broom Boiler protective grille / access protection Table machine with bowl lift Connection 220V, 550 watts Ncsdjfxk Unjpfx Ahzot DGUV V3-tested TOP quality and price in one machine! NEW machine exhibition machine Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: good (used), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Model: PL-3KPH Design: Air-cooled temperature and climate test chamber For sale is a used ESPEC climate test chamber for temperature and climate testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Ncedpfxsy N Awqo Ahzet Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current draw: approx. 11 A Weight: approx. 350 kg Cooling: Air-cooled No external water connection required Refrigerant as per label: R452A – approx. 1.2 kg Features: Touchscreen control Programmable and constant operation modes Temperature and humidity control Observation window in the door Stainless steel test chamber Interior lighting / chamber lamp Side cable/pipe port, approx. Ø 100 mm Overheat protection Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connection Condition: Used machine with signs of age and use. Partial rust and corrosion present in the lower housing area. Interior with usage marks. See images for visual condition. Scope of Delivery: ESPEC Climate Test Chamber PL-3KPH One shelf included Delivery as shown Service: Function check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Documented test run Notes: Inspection possible by arrangement. Loading can be organized. Commercial sale – Sold as-is without warranty. Subject to change and error.

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Ncjdpjycv Sasfx Ahzot Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Njdpfxjfirx No Ahzsct Warning lamp for error and program end With over 60 years of experience

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,173 h, load capacity: 2,000 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Dual pedal Condition: Refurbished, without warranty Technical condition: Good Front tire type: Superelastic Front tire size: 200/50-10 Front tire condition: New Rear tire type: Superelastic Ncedpfxoy Uftfj Ahzet Rear tire size: 16x6-8 Rear tire condition: New Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection, incl. inspection certificate. If you have any further questions, feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to offer attractive leasing & financing options, as well as delivery at favorable terms. We also consider trade-ins of Linde equipment – even without a direct purchase. Operating hours displayed were recorded as of the listing date. Subject to prior sale, modifications, and errors. Side shifter, fork positioner, integrated fork positioner with sideshift 3rd valve, 4th valve, rear working lights, front working lights, roof cover, heater, road-legal (STVZO), full cabin, full free lift, safety light,

Condition: excellent (used), ESPEC Climate Test Chamber PL-3KPH Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. For use in research, development, and quality assurance. Operating Condition Display: STOP / ready for operation. Technical Data Temperature range: -40°C to +180°C Humidity range: 20% to 98% RH Test chamber volume: approx. 400 liters Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Equipment Touchscreen control panel Programmable and constant mode operation BTHC temperature and humidity control Observation window Stainless steel test chamber Internal lighting Cable port Overheating protection Hour counter Industrial design Nodpfx Ahoy H H Iujzoct Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as shown Service before delivery (optional) Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in photos. Note Used device, sale without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 230 V, DGUV certified until: 06/2027, total width: 505 mm, total length: 545 mm, total height: 755 mm, empty load weight: 96 kg, input frequency: 50 Hz, input current: 10 A, overall weight: 96 kg, electrical fuse: 10 A, power: 2 kW (2.72 HP), Planetary mixer mixer Ncsdjfxk Uvopfx Ahzet Model: PL 20 sophisticated technology ... already proven many times! simple manual operation 3 transmission gears 1 stainless steel kettle 20 liters 1 flat beater 1 dough hook 1 broom Boiler protective grille / access protection Table machine with bowl lift Connection 220V, 1100 watts DGUV V3-tested TOP quality and price in one machine! NEW machine exhibition machine Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Profil Bucket / PL.140.170 / MS10 / 1,700 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €4,970.00 net / €5,914.30 gross - Excavator up to: 16 tons - Weight approx.: 605 kg - SAE capacity: 686 liters - Cutting width: 1,700 mm - Back width: 1,100 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profil Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design due to numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket floor for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the Profil Bucket provides the right finish in a workflow: No other bucket models and profiles more precisely and achieves comparable efficiency in processing your orders than this specially developed bucket. We have a very large selection of various Holp products in our warehouse, which are immediately available! Please contact us for this at [phone number] / [email address]. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official Gierking GMT sales and service partner. Ncsdpey T Uvgofx Ahzst We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Holp range! Errors and prior sale are subject to change! = Further information = New: Yes Intended use: Construction Unladen weight: 605 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone at any time). Holp Profile Bucket / PL.120.150 / OQ60-5 / 1,500 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €3,605.00 net / €4,289.95 gross Njdpfoy T Uvaex Ahzect - Excavators up to: 12 tons - Own weight approx.: 450 kg - SAE capacity: 540 liters - Cutting width: 1,500 mm - Back width: 900 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design through numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket bottom for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket delivers the right result in a single workflow: No other bucket models and profiles more precisely and provides comparable efficiency in the processing of your orders than this specially designed bucket. We have a very large selection of various Holp products in our warehouse, which are immediately available! Please contact us for this at / . If desired, we will also gladly provide you with a financing offer. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Unladen weight: 450 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Holp Profile Bucket / PL.080.140 / OQ45-5 / 1,400 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,630.00 net / €3,129.70 gross - Excavator up to: 10 tons - Weight approx.: 305 kg - SAE capacity: 393 liters - Cutting width: 1,400 mm - Back width: 800 mm - Bucket made entirely of HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage when rotating the bucket due to the beveled corners - Optimal design due to numerous edges - Stable substructure - Minimal weight due to optimized design - Perfect material flow in the bucket - Advanced bucket floor for optimal filling - Stable cutting edge made of Hardox 450 When precision is required, the profile bucket provides the perfect finishing touch in a workflow: No other bucket models and profiles as precisely and brings comparable efficiency to the processing of your orders as this specially designed bucket. We have a very large selection of various Holp products in our warehouse that are immediately available! Please contact us at [phone number] for more information. Upon request, we will also be happy to provide you with a financing offer. We are the official Holp sales and service partner. We are the official Magni telescopic loader sales and service partner. We are the official Gierking GMT sales and service partner. We are the official OilQuick sales and service partner. We are the official Weber MT sales and service partner. We are the official Westtech sales and service partner. We are the official DMS sales and service partner. Nsdsy T Uuvspfx Ahzjct We are the official Seppi M. sales and service partner. We are the official JCB construction machinery sales and service partner. We are the official Mercedes-Benz sales and service partner. We are the official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further information = New: Yes Intended use: Construction Empty weight: 305 kg Please contact Marius Herden for further information.