Used Vertical Drill for sale (11,182)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Lrsdpfx Aieh Ek H Sofep Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz Ledpfx Aijxddwrsforp - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm Ledpfxjy At Iye Aifjrp DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Lredpfezb A Rgsx Aifop

Condition: refurbished (used), Lower and upper drill, tiltable, for chair seats of Old America type or similar products Lrsdpoytr Edofx Aifop no. 4 independent lower groups, tiltable No. 2 upper vertical oscillating groups

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Lrsdpevriq Refx Aifop

Condition: used, Comec 3-spindle vertical drilling machine Maximum piece length 100 cm Lsdpfoy S Adijx Aiferp

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Lrsdpfx Ajy Nltnoifop Good working order, tested As is Available immediately

Condition: new, Year of construction: 2022, Bavelloni VDM1636 series vertical milling and drilling machine. + additional options : Lrjdpfetui R Dsx Aifjp - pre-setting of drill bits , whetting , - Barcode reader , - additional Camnay office software. VDM 1636 CN is an NC vertical milling and drilling machine designed to automatically perform complex drilling and milling cycles. Equipped with one double drilling head (1 + 1 opposite spindles), each equipped with a rotary storage tool (8 positions each). The machine, characterized by great ease of operation, has been designed in accordance with the most advanced technical solutions to ensure extremely high accuracy in work. The dual rotary tool storage with 8 positions allows drilling, countersinking and milling at a single workstation. Easy to use, fast and precise in execution thanks to the technological solutions used: 5.5 kW spindles, spindle movements with ball guides, latest generation NC brushless motors with easy and intuitive software Possible work In one automatic cycle, the VDM 1636 CN can process the following operations: - Drilling - Countersinking - Milling - Cutting out Holes can be made at any point on the glass surface. The new control console used in the VDM1636 milling and drilling machine combines all the advantages of numerical control. This interface can work in a network with other machines . It can also be connected to the BAVELLONI network, so that the manufacturer's remote service is possible. The main features of this system are: - Programming while the program controls the movements of the machine, the operator can easily work on the computer. - Simple and direct graphical interface. - Data transfer via commercially available tools . VDM 1636 CN is equipped with one of the most advanced software systems (CAD / CAM) specifically designed for glass processing by numerically controlled machining centers is unique in performance, reliability and ease of use, thanks to the use of state-of-the-art technical solutions

Year of construction: 2000, condition: used, machine/vehicle number: 001119, SECOND-HAND MULTIPLE HORIZONTAL AND VERTICAL DRILLING MACHINE COMEC MOD. FOV/3+CA - CE RULES - N. 2 horizontal boring units - N. 1 Vertical boring unit - Automatic loader Lsdpjqmi Epofx Aiferp - Volt. 415/50 - S/N 001119 - Year 2000

Condition: used, 2-spindle vertical drilling machine Lrodpfx Aieyg Ix Tefsp

Condition: excellent (used), two speed with switch belt gear motor power 0,3kW CE year 2003 Connection 380V Lrodpfx Aoyxl N Uoifjp

Condition: excellent (used), two speed with switch belt gear motor power 0,8kW Lrjdpjyxl Nzsfx Aifep clamp connection 380V

Condition: excellent (used), two speed with switch belt gear motor power 0,8kW Lredpeyxcxaefx Aifsp clamp connection 380V

Condition: excellent (used), Year of construction: 2009, Vertical glass drilling machine SCHRAML topDRILL 130 NC Year of production: 2009 Maximum working height: 1300 mm NC controlled Lodpfx Aoyfrvysifsrp Very good and clean condition Surplus drilling/countersink bits included As is Available immediately

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, workpiece weight (max.): 50 kg, workpiece height (max.): 900 mm, workpiece length (max.): 2,600 mm, drilling depth: 25 mm, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Workpiece dimensions Length min: 200 mm Length max: 2,600 mm Height min: 35 mm Height max: 900 mm Thickness min: 8 mm Thickness max: 60 mm Maximum panel weight: 50 kg Length with extension: max. 3,200 mm Drilling Head Unit BH17 Vertical chucks: 10 Horizontal double chucks: 3 Circular saw blade diameter: 120 mm Max. working depth: 25 mm Saw blade thickness: 4 mm Rotation: clockwise Electrospindle Power at speed 12,000 – 15,000 rpm (S1): 5.5 kW Speed range: 1,000 – 24,000 rpm Rotation: clockwise EQUIPMENT BSolid Software – 3D CAD-CAM design program (Simulation and management of processes for machining and drilling centers; option to select additional modules for extended functionality according to production needs) Lrsdpfx Asw Hqrkeifop Note: Dismantling and loading can be offered by a Biesse service partner for €2,000.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw Lrjdpfx Aijw Nytnofep - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Lredpfx Ajzmw Upoifjp Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe Lsdpsyug R Rjfx Aifjrp handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input Lsdpeyug Hxofx Aifjrp • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Lrjdpjyh Hc Rjfx Aifjp

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. Lrsdpfezdazhjx Aifop The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Lsdpeyplqrefx Aiferp Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Dimensions: approx. 3.6 meters long × 1.2 meters wide Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: like new (used), 30m3 insulated stainless steel tank Lrsdpfxohr Rp So Aifep Dim. 3.40x 6.80. 12 cm insulation, insulated with wool and metal sheet lower bottom insulated with polyurethane foam. We offer transport with our own semi-trailer.

Year of construction: 2002, condition: used, functionality: fully functional, Machine for straight cutting of aluminium and copper tubes. Lrjdpfx Asyt Spcsifop