Eccentric presses double column for sale
Identified location: Ashburn (US) (Edit)
1
type 1013GP
Jvjdii
55 strokes per min
2
nominal pressure 1600 kN
distance between columns 500 mm
stroke 20 - 160 mm
table surface area 1300 x 780 mm
ram surface 800 x 550 mm
ram adjustment 120 mm
throat 400 mm
number of strokes - idle run 50 Hübe/min
dayligth 500 mm
main drive 17,2 kW
control SIEMENS SIMATIC S 7
weight of the machine ca. 14,3 t
dimensions of machine L x W x H 2,57 x 2,09 x 3,45 m
Daudrdyh
- with ejector in table -
11
Ref. -No.: 10151
Brand: HAULICK & ROOS
Type of control: Konventionell
Control: N/A
Storage location: Halberstadt
Country of origin: Deutschland
Pressure: 50 t
Distance Between Columns: 760 mm
Stroke: 6-60 mm
Table Area: 560x720 mm
Bkyydu9
Material width feed: 150 mm
Diarrhea opening table: 120 x 500 mm
Total Power Requirement: 11 kW
Stroke rate: 85-500 / min
Ram surface: 740 x 400 mm
Slide adjustment: 80 mm
Weight Of The Machine Ca.: 7,6 t
2
pressure:200 t
2rha8a
distance between columns:1550 mm
stroke:30 - 160 mm
no. of strokes:30 - 90 /min
distance table/ram, max. stroke up, adjustment up:745 mm
table surface area:1500 x 1150 mm
hole in the table:450 mm
table height over floor:810 mm
side window:800 mm
ram surface:1500 x 1000 mm
ram adjustment:110 mm
power requirement:38,0 kW
weight:26,5 t
dimensions (WxDxH):5,1 x 1,6 x 3,7 m
weight feeder:0,7 t
dimensions roll feed (WxDxH):1,7 x 1,2 x 1,7 m
ram adjustment:motoric
ram counterbala...
5
pressure: 100 t
distance between columns: 1070 mm
slide stroke: 50..150 mm
dayligth: ca. 500 mm
clamping table: 920x760 mm
tool shank hole: 430x200 mm
ram adjustment: 0...180 mm
ram surface area: 910x760 mm
number of T-slots: 5 Stück
total power requirement: 12 kW
S8zwipko9
weight of the machine ca.: 10 t
dimension machine xH: L 2,0 x B 1,5 x H 3,25 m
Four column excentric press with feeder made by company "Wanske"
- without drawing cushions
- slide guiding: two point system
- distance between c...
3
Pressure total: 1200 ton
Bg9cuoty
Ram stroke: 700 mm
Ram adjustment: 500 mm
Shut height (stroke down, adjustment up): 1.190 mm
Table surface area : 3.500 x 2.500 mm
Ram surface area: 3.500 x 2.500 mm
Free frontal opening L-R: 3.850 mm
Free lateral opening F-B: 1.600 mm
Cushion capacity in table: 330 ton
Cushion stroke: 190 mm
Ejector in ram: 10 - 70 ton
Ejector stroke in ram: 150 mm
Number of strokes: 10 s.p.m.
Electrical connected load: 140 kW
Weight of machine approx.: 298 ton
Standard confi...
1
Screw press F1734 A 250 tons built in 1985 in Russia.
Technical parameters :
- maximum pressure: 250 tons (2500 kN)
- machine weight: 18000 kg
Bfpyliqdtl
1
pressure 63 t
distance between columns 320 mm
stroke 8 - 120 mm
table-size 800 x 600 mm
ram surface 500 x 400 mm
throat 315 mm
dayligth 410 mm
ram adjustment 70 mm
no. of strokes 56 / 90 Hub/min
total power requirement 6 kW
weight of the machine ca. 5,5 t
dimensions 2,10 x 1,52 x 2,72 m
Beohja2csx
inclinable
9
Ref. -No.: 10152
Brand: HAULICK & ROOS
Type of control: Konventionell
Control: N/a
Storage location: Halberstadt
Country of origin: Deutschland
Pressure: 50 t
Distance Between Columns: 760 mm
Stroke: 6-60 mm
Table Area: 560 x 720 mm
Material width feed: 150 mm
Diarrhea opening table: 120 x 500 mm
Cgpfjgwrc
Total Power Requirement: 11 kW
Stroke rate: 85-500 / min
Ram surface: 740 x 400 mm
Slide adjustment: 80 mm
Weight Of The Machine Ca.: 7,6 t
5
pressure 160 t
stroke 12-180 mm
strokes - infinitely variable 48-120 Hub/min
500 mm
table surface area 1900x1100 mm
ram surface 1950x1100 mm
ram - range of adjustment 100 mm
distance between columns 1800 mm
700
power capacity 30 kW
weight 26,3 t
Bfxcd8kfhy
dimensions BxTxH 3000x2300x4400 mm
table height 990 mm
6
pressure: ca. 100 t
distance between columns: 500 mm
throat: bis Mitte Stößel / up to center ram: 350 mm
dayligth: 450+100 mm
min. ram stroke: 26 mm
max. ram stroke: 152 mm
ram adjustment: möglich/possible mm
ram surface area: 550 x 400 mm
clamping table: 1020 x 710 mm
total power requirement: 10 kW
weight of the machine ca.: ca.7 t
space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m
WITHOUT drawing cushion
Lqzil
Can be demonstrated in idle run.
i.D.
Pressure total: 250 ton
Bbpdfxxten
Ram stroke: 70 / 250 mm
Ram adjustment: 160 mm
Ejector in ram: 20 ton
Ejector stroke in ram: 10 mm
Shut height (stroke down, adjustment up): 520 mm
Free lateral opening F-B: 1.300 mm
Table surface area : 1.600 x 1.600 mm
Ram surface area: 1.600 x 1.600 mm
Number of strokes: 0 - 50 s.p.m.
Required power: 33 kW
Height over floor approx.: 5.500 mm
Weight of machine approx.: 58 ton
Roll feeder
Material width: 1250 mm
Material thickness: 0,3 - 1,6 mm
4
Eccentric press IWK PKZZRR 250/2050 built in 1970 in Germany.
Characteristic data:
- dimensions of the working table: 2000 x 1000 mm
- table height from the ground: 700 mm
- slider dimensions: 1850 x 1000 mm
- stroke: 300mm
- slider stroke adjustment: 200 mm
Vsrpzq
- clearance between columns: 2050 mm
- number of strokes per minute: 14/35
- power: 24 kW
- machine dimensions: 3100 x 2000 x 6500 mm
- press weight: approx. 33 tons
- technical documentation, electrical and hydraulic diagrams
6
PRESS DESIGN
.. drive system: eccentric / crank
PRESS FORCES
.. total force (nominal): 125 to
PRESS TABLE
.. table surface (left-right): 1000 mm
.. table surface (front-back): 800 mm
SLIDE
.. table surface (left-right): 880 mm
.. table surface (front-back): 710 mm
.. stroke rate (max.): 140 /min
SLIDE (MECHAN. PRESS)
.. slide adjustment: 100 mm
.. stroke min.: 20 mm
.. stroke max.: 125 mm
.. stroke rate (min.): 40 /min
.. stroke rate (max.): 140 /min
.. hydraulic overload protection: yes
...
5
pressure 200 t
no. of strokes 32-56 Hub/min
table: 800 x 960 mm
ram head dimension 630 x 550 mm
ram adjustment 110 mm
adjustment of stroke 20 / 130 mm
total power requirement 15 kW
weight of the machine ca. 16,8 t
dimensions of the machine ca. 2,85 x 1,4 x 3,15 m
Equipment:
- hydr. overload, (attached with new slide 1983)
- sound insulating cabinet (Fa. Phono-Therm, Bj. 1987)
Ysmdus
- belt system:
*CNC roll feed, make GSW, type WVE 400/160
weight: 50/80 kg
*straightener, 7 rolls, make Schl...
1
Pressing force 300 to
Table 1200 x 1000 mm
Delivery time approx. 3 months from order placement
Pressing force: 300 to
Table: 1200 x 1000 mm
Clutch: Plates
Activation: pneumatically
Stroke: 180 mm
Izfa2ax
Stroke rate: 26 H / min
Engine: 22 kW
Distance from table plunger: 515 mm
Tappet surface: 1460 x 1090 mm
Hole in the table: 355 mm
Length: 2,600 mm
Width: 1,950 mm
Height: 4.600 mm
Weight ~: 21,500 kg
8 slide guide Lichtschrankenmotorische plunger adjustment hydraulic overload protection motor l...
5
pressure: 125 t
stroke: 28 mm
number of strokes: 56-225 Hub / Min
distance between columns: 1000 mm
ram adjustment: 60 mm
distance table/ram: 376 mm
Table dimensions: B.950xT:720 mm
2pt9uwv39
passage opening in table: 400x130 mm
height over floor: 1120 mm
ram surface area: 920x540 mm
mortise hole in ram: Dm 65 x 120 mm
column travel -side: 250 mm
total power requirement: 30 kW
weight of the machine ca.: 15,5 t
dimensions of machine: 3,1x1,34x3,6 m
dimensions electric cabinet LxWxH: 0,64x0,22x1,2...
15
Complete pressing line consists of:
1. Eccentric press PDM 1B/500
2. Decoiler, straightener and feeder (manufacturer Asservimenti Presse)
3. Magnetic manipulating jig for taking out the pressed piece (Czech made)
4. Magnetic belt for taking of wastes (manufacturer NSM Magnettechnik)
5. Scrapping shears for cutting of wastes (manufacturer ZDAS)
6. Belt conveyor for transport of wastes to container (Czech made).
Bo82oqrjie
Technical specifications of press Mossini:
Max. pressing force 5000 kN
Ma...
5
Complete stamping press. Used in production in september.
Gmminvrz
TYP: HR 50 SL-4S
Build yearr: 1973
Weight ca.: 6.5t +/-
Table(tool) dimension: 830x440mm (tool max 600mm x 370mm)
Refurbished: 1999
Pressure: 50 ton
Price excl transport & loading
6
br. double column eccentric press
Make MIOS/Italy
Model T40FV
Machine no.: 50128
Year of manufacture 2002
Printing capacity 40 to
Projection 200 mm
Stroke adjustment 5 - 75 mm
Tappet adjustment 50 mm
Fixed stroke rate 140 strokes/min.
Installation height 330 mm
Bo3bddbsa8
Passage between the stands 245 mm
Table size 405 x 670 mm
Plunger dimensions 155 x 315 mm
Tappet bore 38 mm
Press inclination angle 18 °
Stopping time 113 ms
Overtravel 48 mm
Safety distance 226 mm
Air consum...
5
pressure 160 t
distance between columns 1400 mm
stroke 8 - 110 mm
strokes per minute 40 - 250
ram adjustment 120 mm
daylight (stroke down, ram adjustment above) 700 mm
table surface area 1300 x 800 mm
dimension of ram 1270 x 800 mm
column travel -side B 520 x H 810 mm
hole in the table 800 x 200 mm
flute distance 150 mm
voltage 50 Hz / 400 V
total power requirement 45 kW
weight of the machine ca. 22 t
dimensions of the machine ca. 2,9 x 2,15 x 3,7 m
2 connecting rod machine
including roll fe...
1
Pressing force 400 to
Table 1300 x 1100 mm
Delivery time approx. 3 months from order placement
Pressing force: 400 to
Table: 1300 x 1100 mm
Clutch: Plates
Activation: pneumatically
Stroke: 200 mm
Stroke rate: 26 H / min
Motor: 30 kW
Distance from table plunger: 550 mm
Tappet surface: 1100 x 1100 mm
Hole in the table: 340 mm
Length: 3,850 mm
Width: 1,950 mm
Height: 4,350 mm
Bxlsi7uy
Weight ~: 23,500 kg
8 slide guide Lichtschrankenmotorische plunger adjustment hydraulic overload protection motor l...
6
pressure: 100 t
slide stroke: 100 mm
throat: 500 mm
distance between table / ram: max.300 mm
ram stroke-adjustment: 250 mm
passage between the side columns: T:500xH:450 mm
table:: 900x600 mm
clamping plate: 900x600x80 mm
passage opening in table: Ø 120 mm
clamping surface ram: 550x250 mm
total power requirement: 7,5 kW
weight of the machine ca.: 8,2 t
dimensions electric cabinet LxWxH: 0,6 x 0,35 x 1,76 m
dimension machine xH: 1,8 x1,5 x 2,6 m
control via manual switch and foot control possible
...
8
Overall size: 900x900x1800 mm
Stroke length: 80 mm
Boiugf2lzr
Weight: 702 kg
The machine used for electric motor coal/carbon brush pressing
5
Double stand eccentric press Beutler ZA 100
Bj.1980 (until disassembly run)
Operating manual available
without feed device
Beutler control Completronic
Technical specifications:
Pull force: 1000 kN
Max. Cutting surface for 400N / mm²: 2500mm²
Passage between front stands: 1000mm
Side passage in pillars: 420mm
Table surface, width x depth: 900x600mm
Impact surface, width x depth: 980x420 mm
Stroke length: 50-100mm
Max. Distance between table (without plate) and bumpers: 560mm
3ysvlkgo3
Thickne...
8
Weingarten Mechanical Press 500ton double amount with 3300x1800 mm removable table and complete DEMAQ feeding line (compact version)
I9en88l
Machine Fully refurbished in 2017
New feeding system in 2017
It is possible to provide the disassembly, transport and assembly service, price on request.
2
pressure 160 t
dayligth 700 mm
Tan03wwj8
number of strokes adjustable 30 - 180 min
table-size 1600 x 640 mm
ram surface 1440 x 950 mm
distance between columns 1600 mm
hole in the table 1300 x 350 mm
ram adjustment 100 mm
daylight between the side columns 640 x 700 mm
stroke of ram - solid 40 mm
total power requirement 30 kW
weight of the machine ca. 25 t
dimensions of the machine ca. ca. 3 x 2,3 x 4 m
- With hydraulic overload
- With shuttle table device
Machinewill be partly recondition (wi...
1
Pressing force of 200 to
Table 1200 x 1000 mm
Delivery time approx. 3 months from order placement
Pressing force: 200 to
Table: 1200 x 1000 mm
Clutch: Plates
Activation: pneumatically
Be9lal07qt
Stroke: 180 mm
Stroke rate: 35 H / min
Motor: 18,5 kW
Distance from table slide: Max 500 mm
Tappet surface: 900 x 700 mm
Hole in the table: 250 mm
Length: 2400 mm
Width: 1.650 mm
Height: 4.000 mm
Weight ~: 18,500 kg
8 slide guide Lichtschrankenmotorische plunger adjustment hydraulic overload protection m...
13
Mechanical press / eccentric press + decoiler and straightener
Stgtvg
Manufacturer: Wilkins & Mitchell
Type: D5423
Capacity: 200 ton
Stroke: 350mm
Stroke Adjustment: 100mm
Strokes Per Minute: 40
Table Dimension 1370 x 950mm
7
Overall Size: 1400x1300x2300 mm
Work space: 200x200x150 mm
Bnr7sdrlpm
6
Gêbr. Double stand eccentric press
Manufacre-EBU/FAV
Model H130/320 FRIV
Mash.-No.: RP5682/98
Built in 1998
Pressure power 130 to
Exoffload 300 mm
Beypbb8h8p
Table size 900 x 580 mm
Stößle area 560 x 360 mm
Passage eg. i.e. Stines 280 mm
Lift adjustment 11 – 112 mm
Stestle adjustment 80 mm
Lift number 60/min
Reverse time 119 ms
Safety distance 191 mm
Motors:
Main drive 7.5 kW
Hydraulics 1.5 kW
Dimensions:
Width 1600 mm
Depth 2000 mm
Height 3000 mm
Weight about 8300 kg
with:
Hydr. Clutch an...
8
Manufacturer: Heilbronn
Type: 630-4
Year of construction: 2012
Nominal press force: 6300kN
Number of strokes, infinitely variable: 20-65 H / min
Setup speed: 1-20 H / min
Distance between table top and plunger,
Stroke down, tappet adjustment Center: 580 mm
Durchgangim Sidestand approx.: 800 mm
Piston stroke fixed: 450 mm
Slide motor-driven height adjustment: +/-100 mm
Tappet surface with T-slots 28 mm: 2400 x 1800 mm
Nldsh
Passage between denÖlfangrinen: 2450 mm
Side stand passage:
Width at the...
3
pressure 160 t
Uwcjfxfbm
dayligth 600 mm
stroke 25 - 150 mm
table surface area 1500 x 900 mm
ram surface 1500 x 900 mm
ram adjustment 100 mm
daylight between the columns 1500 mm
daylight between the side columns 400 x 200 mm
distance between columns 1680 mm
weight of the machine ca. 15 t
dimensions of the machine ca. 2,7 x 1,8 x 4,4 m
1
Press power 160 to
Table 1100 x 900 mm
Delivery time approx. 3 months from order placement
Pressing force: 160 to
Table: 1100 x 900 mm
Clutch: Plates
Activation: pneumatically
Stroke: 180 mm
Stroke rate: 35 H / min
Tgcjbhap
Motor: 15 kW
Distance from table slide: Max 450 mm
Tappet surface: 700 x 700 mm
Hole in the table: 200 mm
Length: 2.300 mm
Width: 1500 mm
Height: 3.750 mm
Weight ~: 15,500 kg
8 slide guide Lichtschrankenmotorische plunger adjustment hydraulic overload protection motor lubrica...
2
Manufacturer:
Calishaw
Model
Calishaw Walker
400 to double connecting rod eccentric press
with expert turntable
Year of build
1971
Control
Table size
Dam9dgp7o
3960 x 600mm
Number of strokes
16/min
Cutting force
400 to
Lifting height
254mm
Clutch / brake
pneumatic
Suspension
6 x
Dimensions L W H
7,200 x 4.000 x 2145mm
Weight
8550kg
Drive
20KW
Additional equipment
Expert turntable
Type No.:
E49/0511/4
Ø = 3,000 mm
Processing stations 4 pieces = 3 x insertion = 1 x punch
Staff security through lig...
5
Press force: 300 t
Stroke length: 200 mm
Stroke speed: 20-60 1/min
Shut height: 680 mm
Ram adjustment: 200 mm
Overall size: 2600x2000x4200 mm
Iu89xsmti
6
Sheet stamping press 800TON model PKZV I 800
Year of manufacture: 1978
Maximum force of slide 8000KN
Stroke of slide 500MM
Adjustability of slide 500MM
2rb8hy
Maximum distance between
bolster and slide(stroke down,
adjustment up )SDAU 1700MM
Width between columns 4000MM
Slide area (width x depth) 3950x2500MM
Bed area (width x depth) 4000x2500MM
Opening in bed (width x depth) 3520x1520MM
Main motor power 90KW
Idle stroke rate 17/MIN
Counter pressure of cushion (in bed) 1600KN
Height ...
2
1
pressure 40 t
dayligth 250 mm
stroke 8 - 50 mm
table clamping surface LxW 620 x 450 mm
table height over floor 980 mm
no. of strokes 85 - 500 Hub/min
distance between columns 680 mm
ram - range of adjustment 50 mm
number of T-slots 4
ram surface mm
Tvdunx3gs
total power requirement 8 kW
dimensions of the machine ca. 2,3 x 2,2 x 2,8 m
weight of the machine ca. 5,8 t
3
Force: 75 tons
Table: 630x620mm
Ram: 500x450mm
Ram adjustment: 80mm
Xujw2gkdp
Daylight: 370mm
Windows: 300mm
Stroke: 08-100mm
Strokes/Minute: 07-160
Requested power: 11KW
Weight: 7 tons
Height: 3050mm
SIRI electronic servo roll feeder
Hydraulic overload protection
Hydraulic Ortlinghaus clutch
1
double mast mechanical press
ton 250
Bly2t9a3er
floor 2500 x 1250
stroke 420mm
4
Used Fine Blanking Press FEINTOOL 1400 ton complete with servo line
the machine can be inspected in Italy near Turin.
Power 1400 ton
Power back pressure 300 ton
Power roping 500 ton
Bfunoty2pv
Strokes 18
Slide stroke from 20 to 100 mm
Die height from 360 to 610 mm
Dimension table top 1200 x 1200 mm
Dimension table down 1200 x 1200 mm
Creasing stroke 30 mm
Back pressure stroke 30 mm
Year of construction 1973
Complete with servo line
2
Machine weight 25t
A machine for renovation.
The machine hasn't worked for 25 years.
Dimensions
Width approx. 1.5m
Length about 2m
2rygom
Height about 4m.
Net price.
Manufacturer: ZTHE
Noiin
Tip.LUD 500
Year of construction: 1975
Pressing force 500 t
Automatic dispenser
Table size: 2000 x 950
The decor is demounted when delivery-ready. !!!
5
pressure 40 t
distance between table / ram 300 mm
stroke 10 - 50 / min.
table-size 700 x 600 mm
distance between columns 700 mm
ram surface 700 x 550 mm
column travel -side 200 mm
ram stroke - adjustable min/max 10 - 50 mm
total power requirement 6 kW
weight of the machine ca. 4 t
dimensions of the machine ca. 2,13 x 1,15 x 2,8 m
- Mit Bandanlage, Fabrikat elmea, bestehend aus:
* zwangsgeführter Zangenvorschub, Typ PM 180 (100 x 200)
* Richtmaschine, Typ MR 17S60M (100 x 0,2 - 1,0)
* Do...
4
Force: 320 tons
Type: SAR320
Table: 1950x1100
Ram: 1650x1100
Windows: 800mm
Bbyec3r
Strke: 20-102mm
Strokes /minute: 20-120
Requested power: 90 KW
Weight: 62 tons
Height: 4800mm
The machine will be reconconditioned with new electric
5
Pressure: 100t
Table: 940x800mm
Technical data: Pneumatische Kupplung
Dimensions: 3700mm x 1800mm x 1700mm
Wolc32tw
Weight: 13t
New electric system!
3
Mechanical Press CLEARING INNOCENTI 400 ton
in excellent condition. can be inspected under power
Mod: S2 400 - 108 - 60
Power: 400 tons
Press table dimension: 2743x1524 mm
Number of cushions: 2
Bfshrb32vb
Cushions dimensions: 1143 x 990 mm
Number of openings in the bench: 2
Cushions pressure: 70 tons
Cushions Stroke: 203 mm