Used Weidmann/Wr Fl-100 for sale (25,632)

Condition: new, Year of construction: 2026, semi-automatic labelling machine FL-100 Labelling machine FL-100 product diameter: 15 - 130 mm label width: 15 - 200 mm label length: 15 - 600 mm Roll diameter: 300 mm core diameter: 38 - 110 mm dispensing speed: 4 - 20 m/min Laedpfxefnkbre Aiweb Supply voltage: 230 V / 50 Hz Weight: Approx. 36 KG Dimensions: 800 (L) x 500 (W) x 400 (H) mm

Condition: new, Year of construction: 2026, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Ledpou Ia E Ijfx Aiwjab Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Condition: new, Year of construction: 2026, Automatic labeler FL-250, new machine with the following equipment: Stainless steel frame 170 mm wide link chain label width up to 140 mm or up to 190 mm dispensing speed from 1- 20 M/ min. (optional up to 30m/min) Lajdpfxshzt S Ss Aiwsb product diameter from 25 mm - 170 mm (optionally other sizes possible) Touch screen display Label dispenser with three-dimensional adjustment possibility Product separation with two-sided belts Connection to a filling machine is possible Feeding table and pick-up table available as option further information can be found under Weidmann-MaschinenGmbH

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, usable tank capacity: 100 l, input voltage: 400 V, tank capacity: 100 l, total width: 820 mm, total length: 1,050 mm, total height: 1,690 mm, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, NEW NEW Fermentolevain Fermento NEW NEW TOP unit for preparation and preservation of liquid sourdough with Dual Care System for the best flavors Control for fermentation and preservation phases with integrated cooling system easy-Touch control panel Mixing time and speed adjustable Stainless steel construction Removable agitator with overflow sensor and alarm buzzer Discharge height: 440 mm 2 agitators, double lid Floor and side scrapers for high quality Tank capacity: 100/125 kg Built-in frame heating and attached cooling coil Laodpfxst Sckmj Aiwob Cooling performance per hour: approx. 6°C drop Exclusively DGUV V3 tested by us Connection: 400V, 16A CEE plug Dimensions: 820 x 1050 x 1690 mm (W x D x H) Brand new machine & SAB tested with warranty + spare parts service Optional: Built-in scale Water connection with hand shower Cleaning cycle Maintenance contract Service package More top bakery machines in stock!

Condition: used, mileage: 23,135 km, power: 154 kW (209.38 HP), first registration: 08/2002, fuel type: diesel, empty load weight: 7,105 kg, maximum load weight: 3,045 kg, overall weight: 10,150 kg, tire size: 335/80R22.5, axle configuration: 4x4, color: red, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 9, Equipment: ABS, all wheel drive, cabin, differential lock, parking heater, trailer coupling, Vehicle location: Bovenden, crew cab, sun visor, auxiliary heater, 6-speed manual gearbox, ABS (anti-lock braking system), frame covers, differential lock, rotating beacon, storage box. Body: Magirus fire engine LF 8/6 with 600-litre water tank and built-in FPN 8/8 fire pump, several units available from EUR 15,000 to EUR 39,000. Sale to business customers or for export is subject to an additional 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY; subject to changes, interim sale, and errors! Ledpevmhudjfx Aiweab

Condition: good (used), The scope of delivery includes: Laodpfsi A Ik Iox Aiwsb 01x mounting bracket, used Surface: hot-dip galvanized weight: 2,26 kg | pcs. Screw-on plate: 100 x 120 x 10 mm ( with 4 round holes Ø 10 mm ) screw-on flange: 120 x 140 x 10 mm ( 1 slotted hole 62 x 15 mm )

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Laodpfsxl Rgiox Aiwjb

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 5,5 kW Ledpfx Aioy R Rxrjweab dimensions of the machine (l x w x h) : ± 1.650 x 950 x 1.570 mm capacity : ± 1500 kg / h for blocks of max. ± 520 x 220 mm (w x h) 3 x 400 V

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint Lasdpfx Aeyzfu Ajiwjb -Cardan shaft: with universal joint -Type: Length 290 mm -Flange: Ø 100 mm -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm -Weight: 6.1 kg

Condition: new, Year of construction: 2025, A laser marking machine is an invaluable part of a production. Wattsan FL TT can mark or engrave QR codes, serial numbers, dates, and any picture you want onto items. This laser marker works with metals and their alloys. Plastic, fabric, leather, glass, and other materials are also within reach of a laser. The marker’s tripod can be removed and mounted on the ceiling, allowing you to operate work items of any size! Wattsan FL TT comes with the EzCad system, which allows you to edit text in real time. It also supports vector, bitmap, BMP, PLT, CDR, DXT, and AI formats, among others. You can give our managers a call for additional details! Wattsan FL TT characteristics: Working area: 300x300, 110x110, 200x200 mm Laser power: 20-100 W Machine size: 740x400x740 mm Packing size: 820x490x850 mm Weight: 54 kg Laser sourse: RAYCUS, JPT (MOPA), IPG, MAX Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Laodeh Uc Dbjpfx Aiwob On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), mileage: 611,000 km, power: 324 kW (440.52 HP), first registration: 01/2015, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel, total length: 9,720 mm, total width: 2,500 mm, total height: 3,850 mm, Year of construction: 2015, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, electric window regulation, fog lights, power mirror, seat heater, trailer coupling, = Other Options and Accessories = - Aluminium fuel tank - Heated mirrors - Leaf suspension - Brake booster - High beam - Air conditioning - Refrigerator - Air-suspended seats - Air horn - Radio/CD player - Rotating beacon - Sliding sunroof - Seat heating - Sun visor - Toolbox - Xenon lighting - Towing hitch = Remarks = Vehicle with new engine, 0 km (invoice available) 8x4 Euro 6 Leaf suspension ZF 16-speed manual gearbox Palfinger T 20 roll-off tipper Palfinger crane PK 41002 EH E + Fly jib PJ 080 C 6x hydraulically extendable 4x hydraulically extendable Total working height: approx. 30 meters Hydraulic winch Radio remote control 4-point outrigger 5th and 6th function Belgian registration In very good condition! Ready for immediate use. = Further Information = Transmission Transmission: ZF, 16 speeds, manual gearbox Axle configuration Suspension: leaf springs Lodpfxjyvtf Ss Aiweab Front axle 1: steering Front axle 2: steering Weights Unladen weight: 21,106 kg Payload: 10,894 kg Gross vehicle weight: 32,000 kg Functional Crane: Palfinger PK 41002-EH E + Fly jib PJ 080C, mounted behind the cab Body manufacturer: Palfinger Hooksystem T20 Condition Technical condition: very good Visual condition: very good Additional information For more information, please contact G. Damen or W. Schischke.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,860 kg, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width (not in conjunction with forklift bracket) Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area 1 pair of ramps 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (suspension bar for ramps at the rear) Towing device for central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension GFA or BPW axles of the manufacturer's choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and non-oscillating without central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Lodpsi Ri Eiofx Aiwsab 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 9010 pure white Note! Bridge inside only primed if painted bridge version! Attention! These are archive pictures. Also available IMMEDIATELY with 5m bridge!

Condition: excellent (used), Year of construction: 2017, 1 X Audion CS-Matic 100 shrink wrapper. The Audion CS-Matic 100 offers flexibility for diverse product sizes. Its continuous side-seal system  accommodates a wide range of heights and widths, alongside unlimited product lengths. Smart integrated sensors automatically determine the perfect bag size, while the adjustable, PTFE-coated seal bar ensures high-speed packaging, achieving up to 4200 pristine packs per hour. Technical specification: ⚙️ Manufacturer - Audion Packaging Machines ⚙️ Model - CS-Matic 100 ⚙️ Serial number - 63825 Laedpfow Euzmex Aiwsb ⚙️ Year of manufacture - 2017 ⚙️ Power - AC Input 380-415V | 50-60 Hz | 2330 W | 10A Benefits: ✅ Very fast cycle - Up to 4200 packs per hour. ✅ Flexibility - Possibility of packing single packs or multipacks at any length. ✅Easy operation with touchscreen control systemm - Sealtime, seal temperature and belt speed can easily be adjusted. ✅ Automated sealing - Continuous cycle sealing. ✅ Motorized systems - Sealing bar and conveyors are controlled by an inverter and encoder. ✅ Wide film choice - The CS Matic 100 can handle polyolefin, polyethylene and pvc centrefolded film. ✅ User-friendly touchscreen - Easy navigation through the menu structure and safe control of all packaging parameters. ✅ Built-in safety features - An emergency stop button is standard equipped.

Condition: as good as new (ex-display), Year of construction: 2023, Short & sweet Base axis (X) : 1.3-2 mm Cantilever (Y) : 1.3-4 mm Accuracy : 0.06 mm Technical data Lasdpfx Aiohw Nfqjweb Linear axis accuracy : ± 0.1 mm/m Maximum travel speed : 10 m/min Acceleration : 0.02 g Repeat accuracy : ± 0.06 mm Circularity : ± 0.1 mm Z-axis stroke : 180 mm Base axis (X) : 1.3 m, 3 m, 4 m Extension arm (Y) : 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce tapping aid1 Splash guard1 FlowTexturing (FTT) Abrasive de-sludging system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Clean water conversion kit * Required for FlowTexturing

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Lodpfsfx Hyfsx Aiwsab Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, maximum load weight: 2,184 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,070 mm, loading space width: 1,830 mm, total width: 2,320 mm, total height: 980 mm, Low-loader tandem axle trailer, manufacturer STEMA, type SySTEMA ST .2, gross weight: 2,700 kg, overrun braked, 100 km/h permissible speed... and much more. Subject to errors and prior sale. Laedeym Ihbopfx Aiweb

Condition: used, maximum load weight: 2,094 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 1,960 mm, total height: 1,020 mm, A12 GW26NG000301 High-bed tandem trailer, manufacturer STEMA, type SySTEMA SH .2, gross weight: 2,700 kg, High-loader with low frame, 4.01 m x 1.83 m, 10" tyres, 100 km/h approval Loading height: 600 mm Laedpfjym Igwox Aiwjb Subject to errors and prior sale.

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: FL MC 10/100BASE-T/FO G1300 ST -Price: per piece -Number: 6 piece -Dimensions: 100/20/H120 mm Ljdpfxsf Rum Es Aiwoab -Weight: 0.1 kg/piece

Condition: excellent (used), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Corrosion Test Chamber, type SAL 1000-FL PLC, ideal for industrial corrosion tests in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Laodpoxnyqvefx Aiweb Features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation water, and ventilation testing Technical details: - Exterior: Stainless steel 1.4301, powder-coated (special version) - Test chamber: Stainless steel, ECTFE-coated - Max. chamber temperature: +80 °C - Temperature stability: ±0.3 °K, temporally ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. load sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Ledpfx Aet Igc Sjiweab Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: Lajdpfx Aijx H Ndlewjb - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: ready for operation (used), Parker PRM2PP1 0JV with Wandfluh MVPPM22-100-D1#1 24V DC proportional valve ,used, good condition, 100% functional, scope of delivery acc. photos Lsdpfxsi Ecc Ro Aiwoab

Condition: ready for operation (used), Parker PRPM2PP1 0JV with Wandfluh MVPPM22-100-D1#1 24V DC proportional valve ,used, good condition, 100% working, scope of supply acc. photos Ljdpfx Aoi Ecc Uoiwjab

Condition: used, Year of construction: 2008, Support axle cat. 3 Support wheel and transport wheel 26x12 Model EG 100/300/77RH / Hydraulic cutting width adjustment Strip body no. 30 Maize inserter / Straw insertion plates Disc coulter Overload protection with additional spring leaves / Laodpfxetia Dbj Aiwjb

Condition: used, mileage: 1,001 km, first registration: 01/2021, overall weight: 16,000 kg, color: white, driver cabin: other, gearing type: other, loading space length: 7,605 mm, loading space width: 2,450 mm, loading space height: 2,790 mm, Year of construction: 2021, Vehicle location: Bovenden, doors, lashing rails Lsdpfx Aisxvzqyoweab Body: Swap body with hinged doors The exact year of construction cannot be determined as there is no longer a type plate! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .