Used Weinig Pva 250/ 85 for sale (14,098)

Condition: good (used), Year of construction: 1977, functionality: fully functional, Weinig Type PFA 250/85 Year of manufacture: 1977 1 U-7.5 kW 2 R-7.5 kW 3 L-11 kW 4 R-5.5 kW Gsdpoz I A N Eofx Al Sskc 5 O-11 kW 6 O-7.5 kW 7 U-7.5 kW 8 Uni 7.5 kW Table: 2.5 m Spindles 6 and 7 with jointer Feed: 5.5 kW

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, overall weight: 16,000 kg, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Gksdpox Svm Refx Al Soc Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: excellent (used), Year of construction: 2022, Weinig Dimter ProfiPress L II Comfort 2500 x 1300 Wooden input length min./max. 800 - 2500 mm Timber widths min./max. 40 - 150 mm Gksdpfx Aoz Dh S Rel Ssc Unequal fin width in a panel Wood thicknesses min./max. 4 - 30 mm Plate end widths variable min. / max. 200 - 1300 mm Glue / adhesive type PVAc (Polyvinyl Acetate) Total pressing force max. 240 kN Press force per cylinder max. 24 kN - min. 4.4 kN Filling width of the press per cycle min. 1150 mm - max. 1350 mm Filling area of the press per cycle max. 3.25 m² Min. area occupancy per filling 50 % Max. recommended values are: Specific pressing pressure for softwood approx. 1.0 N/mm² specific pressing pressure for hardwood approx. 1.4 N/mm² Glue station GS 100 - 2,5 m Heizung Hochfrequenz mit Generator, luftgekühlt Generator 30 kW, luftgekühlt Outfeed conveyor 2500mm Full description on request. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 1973, Weinig planer 4-sided / U250 / Unimat 250 planing width: 250mm Planing height: 120mm Gkjdpfxjrigq Se Al Sec Spindle bottom 7,5 kW Spindle right 5,5 kW Spindle left 7.5 kW Spindle right 7.5 kW Spindle top 7.5 kW Spindle bottom 7.5 kW Spindle sawing unit 7.5 kW with planing heads with milling tools with knives with all accessories good condition - available immediately Location: Austria, near Sankt Pölten

Condition: not inspected (used), functionality: unexamined, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, Working width: 20 – 230 mm Working height: 8 – 160 mm 7-spindle configuration Feed rate infinitely adjustable: 6 – 36 m/min Spindle motors with 7.5 kW, 11 kW and 18.5 kW power Mechanical brakes on the motors Electrical adjustment options for spindles and feed rate Hardened table insert in front of the first lower spindle Pressure pads and guides for precise workpiece guidance High-quality ball bearings and robust industrial design Spindle arrangement: Lower horizontal spindle 7.5 kW Right vertical spindle 7.5 kW Gksdpezt Hf Djfx Al Sec Left vertical spindle 11 kW Right vertical spindle 7.5 kW Upper horizontal spindle 18.5 kW Lower horizontal spindle 7.5 kW Universal spindle 7.5 kW

Condition: new, Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: T/MS21-850125096, total length: 2,000 mm, input voltage: 240 V, track width: 900 mm, pressure: 7 bar, We have 2 off Ceia Metal detectors with full air reject systems , Excellent condition only used for 3 months Did 65,00 Buns per hour Fully tested and ready to go in perfect condtion Lockable reject box Last Calibrated till Dec 2025 All passwords and manuals Lh / Rh Unit Gksdpoy R S Tdsfx Al Ssc Please contact for Price and more information .

Condition: excellent (used), functionality: fully functional, Intermediate conveyor belt / WEINIG, type LTB 250-3500, serial number 81005, year of manufacture 1997 Gedpfx Alozxpfkj Sjkc - Length 3500 mm - Width 250 mm - Height 820-1000 mm - Feed rate 20 m/min - Anti-slip plate 3000 mm - 2x pneumatic glass strip ejectors In very good technical and visual condition.

Condition: good (used), Weinig planing head Gkodpez N A Thjfx Al Ssc Bore – 50

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Gedpfx Aoz Nir Rel Sjkc Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: used, functionality: fully functional, Setting gauge from Weinig Spindle: 40 mm Tool flight circles: 80 - 300 mm Clamping length: 310 mm Gedexxprwjpfx Al Sskc

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 85 h, load capacity: 2,500 kg, fuel type: electric, fork length: 2,350 mm, drive type: Elektro, Low level order picker Load centre: 600 Condition: Ready for operation and fully functional Gjdsz El R Hepfx Al Sokc Technical condition: Very good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery year of manufacture: 2022 Description: Initial lift,

Condition: excellent (used), The WEINIG CUBE four-sided planer is offered as a used machine. The machine features a reversible knife system, electric height adjustment, and a lubricant pump. Width and height are displayed via laser. The equipment also includes a Cube Mech stacking system. Technical data: Planer width: 260 mm Planer height: 160 mm Number of spindles: 4 Motor, spindle 1: 5.5 kW Motor, spindles 2 + 3: 5.5 kW Motor, spindle 4: 5.5 kW Feed speeds: 6-12 m/min Dust extraction port Ø: 250 mm Quality information: - Feed system checked - Table guides checked - All settings checked Godez Hk Sljpfx Al Sokc - Complete basic inspection - Complete basic cleaning - Pneumatics checked - Ready for immediate use

Condition: excellent (used), Year of construction: 2008, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM Gkedsz N Szuepfx Al Ssc CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: excellent (used), Blade: Z 6 Cutting circle diameter: 150 mm Bore: 50 mm Length: 220 mm Gedpfx Aozxb U Djl Sokc Clamping: Hydraulic Price per piece.

Condition: excellent (used), Catalog number: 7959 TECHNICAL DATA - track width: 250mm - shaft width: 250mm - max. blade diameter for multi-blade saw: 350mm - blade arbor diameter: 70mm - max. cutting height for multi-blade saw: 120mm - table width with clearance: 830mm - table length: 1780mm – from above: - fences - roller, sliding pressure roller, metal, smooth - fences - pressure roller, sliding - saw shaft - pressure roller, sliding, metal, 2 pcs – from below: - guide strip - fences - track - electric adjustment of the machine body, up/down Gkodpfxezxq Efe Al Sec - manual adjustment of the saw shaft - central lubrication - stepless feed rate adjustment - feed motor: 1.1kW - main motor: 37kW - diameter of the dust extraction nozzle: 170mm - overall dimensions (L/W/H): 2000x1500x2000mm - weight: 1850kg ADVANTAGES - German production - Used multi-blade saw, very good condition Net price: 45900 PLN Net price: 10675 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to larger fluctuations)

Condition: excellent (used), Precision setting gauge for Weinig Hydromat Godpfx Aozwwk Sel Sskc Mandrel – 50 mm

Condition: excellent (used), Blade: Z 6 Cutting diameter: 150 mm Bore: 50 mm Length: 150 mm Gkjdozxb U Ropfx Al Sjc Clamping: Hydraulic Price per piece.

Condition: good (used), Weinig Hydromat H 23 Profiling Jointer Godpozwwi Uofx Al Sokc

Condition: excellent (used), Weinig precision setting gauge Mandrel – 50 mm Gkedpfx Alozw Ngfs Soc

Condition: excellent (used), Weinig planing head Bore – 50 Gedpfx Aozxb Uwsl Sokc

Condition: used, Weinig H25 high-speed automatic planing and moulding machine for four-sided planing and profiling of wet timber (freshly sawn) The photographs show the machine’s current condition. Among other things, a number of original new Weinig parts have been fitted, and the tables and stops have been sanded down and recoated. Further new parts are required to complete the machine. These will be ordered upon receipt of an order, taking the customer’s requirements into account. The control panel is for testing purposes only and is temporary. Technical data: - Spindles: 5 - Working width: 250 mm - Working height: 160 mm - Spindle 1: Bottom (7.5 kW) - Spindle 2: Right (11 kW) Gsdpfezrxyksx Al Sskc - Spindle 3: Left (11 kW) - Spindle 4: Top (15 kW) - Spindle 5: Bottom (tba) - Hydraulic feed: 15 kW - Powered table rollers: Yes - Table tops: Resanded and recoated (hardened)

Condition: excellent (used), CATALOGUE NUMBER 7651 Technical data: - track width 250mm - roller width 250mm - max. disc diameter 400mm - disc bore diameter 70mm - max. cutting height 120mm - table width with clearance 810mm - table length 1780mm – from above: - pawls/deflectors - smooth feed roller - pawls - smooth feed roller - saw arbour - 2 smooth feed rollers Gkedpfx Aljzulvws Sjc – from below: - guide - pawls/deflectors - track - central lubrication - stepless feed rate adjustment - feed motor 1.1kW - main motor 37kW - manual body lifting - manual saw arbour lifting - diameter of dust extraction nozzle 200mm - overall dimensions L/W/H 2150x1480x1760mm - weight 1735kg ADVANTAGES - German production - stepless feed rate adjustment - multi-blade saw, used, very good condition Net price: 46900 PLN Net price: 10910 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2017, functionality: fully functional, We offer this used Weinig Automatic Stacker, model Deck Stacker, manufactured in 2017. Video of the machine in operation is available. Gkedpfoz N H Tfox Al Sjc Manufacturer: Weinig Model: Automatic Stacker Year of manufacture: 2017 Condition: Used Category ID: 164 Type ID: 2293 Machine type: Deck Stacker Weinig Stacker – in perfect condition! Weinig is a global leader in the industry. This is not a budget machine; it is a premium-class machine that retains its value and operates reliably for years. For sale: a compact Weinig deck stacker in very good condition. It is entirely in its original paint, unmodified, and well-maintained. Key features: • Stacking length range: from 40 cm to 1.5 m • 4-5 layers per minute • Capability for herringbone stacking • Storage for spacers • Quick and easy adjustment of stacking dimensions • Additional milling wheel – can be mounted to push material off the line and onto a conveyor belt • The machine is in continuous working order Opportunity to view and inspect the machine in operation. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: good (used), Weinig add-on feed gearbox for short pieces. Suitable for Weinig Unimat, Profimat, Hydromat, Powermat. Used condition. Gkodezal Skepfx Al Soc

Condition: good (used), Weinig Uniplan attachment-type feed gearbox for short parts. Used condition. Gedjzal Sdjpfx Al Sokc