Used Wire Pay-Off for sale (11,074)

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Itedpfjf S I I Hex Ah Djk Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Hight of spool: max. 180 mm

Year of construction: 2018, condition: new, loading capacity: max. 1.000 Kg. coil inside diam.: min. 400 mm coil outside diam.: max. 1.100 mm Itsdpfxsdx Ryyo Ah Dok coil hight: max. 800 mm

Condition: good (used), Hydraulic decoiler, movable on rollers Load capacity 20,000 kg (with decoiler support 30,000 kg) Hydraulic expansion: max 550 mm min 480 mm Decoiler drum: 1700 mm Drive: Gearbox with electric motor and electromagnetic clutch, Itedjw Up N Nepfx Ah Dok hydraulically braked with proportional valve Pressing device with drive roller was available. Drawings for a new one suitable for the decoiler, as well as decoiler support for a load capacity of 30,000 kg, are available.

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Iedsmk S Slopfx Ah Dotk Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Itjdszu Hxgepfx Ah Dok

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder Itsdpfjin Rn Asx Ah Dek -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). Itedpjxuhw Dsfx Ah Djk ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: ready for operation (used), functionality: fully functional, A good used take off conveyor in stainless steel fitted with modular belt suitable for use with bagmaker to take filled bags and elevate up to working height - this conveyor is in stainless steel and it was designed and built to accept a metal detector if required (see metal free zone) - complete unit on lockable swivel castors with brakes - three phase geared drive motor with gearbox - modular belt with flights Ready to ship worldwide Ijdpswucfrefx Ah Djtk Ask for more videos and pictures via Whats App Floor length - 2200mm Belt width - 300mm Infeed height to top of belt - 180mm Outfeed height - 1050mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Installation of up to four HOHNER UNIVERSAL 52/8 narrow-staple heads for standard stapling, ring-eye stapling, or mixed applications. Equally well suited as a stand-alone machine or as an integrated unit. -Maximum staple thickness of 8 mm for standard stapling -Easily adjustable stapling table: straight for pads, angled for brochures. -Staple thickness and wire length are adjusted simultaneously and centrally for all heads using a single lever. -A rear stop and two side stops, all adjustable, ensure that the staples are always positioned in the desired location. -Staple heads can be quickly removed or attached, shifted sideways, or simply temporarily switched off. -Maximum stapling capacity: 206 staples per head per minute. -Foot-operated release -Table size: 550 x 280 mm -Insertion depth from the cutting edge: 165 mm Itsdpfx Ahszkuhzs Dek -Maximum staple spacing: 330 mm -Minimum staple spacing: 52-62 mm

Condition: used, 1 off Fronius weld overlay cladding cell Full working order, consisting of: FPA 9000 Digital System Controller Complete with PA9000-RC Remote Pendant Bore-to-bore software 1 off TT 5000 DC 500 Amp TIG power source 1 off TT 2200 DC 220 Amp HW power source 1 off 2,000mm by 1,000mm Cross Slides 1 off KD1500 TIG wire feeder 1 off Standard Single Wire Swivel Head Torch Complete with all ancillary connection cable and hosepacks 1 off 10t turntable 1 off Heavy Duty 4x3 Column and Boom Isdpfx Aozquk Neh Djtk Can be supplied and integrated with optional 3t hollow headstock for horizontal cladding TPS can offer additional installation separately worldwide if required.

Year of construction: 1970, condition: ready for operation (used), Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible. Itsdpfx Aozqu Hqeh Dsk

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. Itsdpozmx Scjfx Ah Dsk In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, This is a complete system manufactured by Key Technology in 2021 and has previously been used for grading sprouts. This is a high-capacity optical colour sorting system capable of processing up to 15 tonnes per hour, depending on product characteristics and quality requirements. Ijdpfx Ajzltgxsh Detk The system comprises of the following equipment: 1 x Elevator conveyor with blue flighted belt on fixed stainless-steel frame. Speed - Fixed. Infeed height - 750mm. Outfeed height - 3000mm. Power - 3 phase. Overall dimensions - 5500mm long x 850mm wide x 3600mm high. 1 x Vibratory shaker cleaner conveyor. Model – SH01-101652. Stroke 8, RPM – 980. Vibratory bed dimensions – 2500mm long x 800mm wide. Overall dimensions – 2700mm long x 950mm wide x 2600mm high. 1 x Optical colour grader sorter with pneumatic rejectors and HMI operator touchscreen control. Model - Tegra T01-101746. Electrical requirements – 400 V / 50 hz / 3 phase. Amps – 44.85 A. Overall dimensions – 2600mm long x 2100mm wide x 26002.1m wide 2.6m long 2.6m high. 1 x Vibratory feeder conveyor for off-take of waste product. Model - SH01-101651. Stroke 8, 18 HZ. Vibratory bed dimensions – 2500mm long x 950mm wide. Manufacturer - Key Technology.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Itsdpfx Ahjvw I Nis Djk Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Condition: used, Year of construction: 1998, color: blue, loading space width: 2,470 mm, loading space length: 4,000 mm, loading space height: 300 mm, mileage: 1,001 km, first registration: 01/1998, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, lashing eyes, swing-out gates, crane behind the building, emergency stop, foldable, elevated platform, 2-point hydraulic support, 2x hydraulic extensions. Ijdpfsi Rmfnsx Ah Dotk Superstructure: Roll-off container with aluminum side walls & Hiab 102-S-2 crane with elevated platform, pre-wiring for grapple control! Hook height approx. 1380mm! Load chart: 4m-2700kg, 7.6m-1380kg! Suitable vehicle -84457- available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), 1x Tromp line. Hybrid Line with Rondo dual servo guilllotine, capable of 200 cuts/hr or 80 stamps/min. Comprising of main line pastry cutting marking discs, burgess calibrator with 2 flour dusters, rondo marker, cutter unit, hand crimped cutter and sensor, tromp depositor with stairs, rondo guillotine and cutters and dockers, portable scrap pastry unit, wire belt take off conveyor, 3 chain take off conveyor, hugging conveyor, topping machine with stand, 6 lane forming box, product divider, 2 off drum pastry cutters (foils) 1 off marker unit (chevron) Main panel Tromp (office), Main Panel Rondo, HMI Panel Tromp, HMI panel rondo, 3 off single step stands. Itjdpoy Enwhefx Ah Djk

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt Itjdpfxen Ut A Sj Ah Dek 50 Hz 30 Kw Production year: 1997

Condition: used, mileage: 319,813 km, power: 338 kW (459.55 HP), first registration: 11/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, * Sun visor * ABS * ASR * ESP * Active Brake Assist * Lane departure warning * Radio * Auxiliary heating * Cruise control * Hill start assist * Electric windows * Electric mirrors adjustable * Heated mirrors * Fog lights * Rear window * Driver's comfort seat * Heated seats * Diff. lock rear axle * Lift/steering axle * Steel bumper * Orange rotating beacon * Air intake at top * Air dryer * Trailer coupling * Duomatic air connection * MAN BrakeMatic * Navigation system * Air horns * Central locking * Cornering light * Roof hatch * Cool box * 2-wire air connection * 12-speed * Suspension: leaf-air * Payload: 14290 * Continuous brake: Intarder Itodpfx Aswr Rzcjh Dsk ----Construction: Meiller roll-off tipper RS 21.65 for 4.5-6.5 mtr container length, 21,000 kg lifting capacity, radio remote control, push arm, hydraulic + manual container locking, hydraulically extendable underrun protection, rapid traverse, additional hydraulic connections at the rear. Sale only to traders. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORTS !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions (see legal notice).

Condition: used, Year of construction: 2018, machine/vehicle number: 1800603, total length: 2,485 mm, total height: 1,715 mm, total width: 1,245 mm, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, input current: 13 A, working height: 870 mm, width of welding knife: 600 mm, length of welding knife: 400 mm, passage height: 240 mm, overall weight: 763 kg, passage width: 400 mm, power: 3 kW (4.08 HP), film width: 700 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), year of last overhaul: 2025, Equipment: documentation/manual, IMPORTANT NOTE – KNOWN WEAR AND TEAR: A conveyor belt (infeed/outfeed belt, part no. 400201) is worn. A quote from the authorized service partner for €879.59 net for materials and labor is available. Alternatively, the replacement can be carried out independently. We will provide the repair quote to interested parties upon request. Minipack-Torre Pratika 56 MPE X1 – fully automatic L-bar sealer, year of manufacture 2018, serial no. 1800603. Sold directly from the end user. Fully automatic machine for shrink and film packaging. Schneider-Electric Magelis touchscreen with 256 storable recipes for format, temperature, and speed. SPECIFICATIONS - Output up to 3,600 units per hour - Sealing bar 600 × 400 mm - Product height up to 240 mm - Films: Polyolefin/PVC/OPP, 7–80 µ - Film roll up to Ø 300 × 700 mm - 230 V single-phase, 3 kW; no three-phase power or compressed air required - L × W × H: 2,485 × 1,245 × 1,715 mm - Weight: 763 kg - Schneider brushless servo drive, PLC logic, emergency stop and safety features CONDITION AND MAINTENANCE Optically in very good condition. Lifetime counter: 36,415 packages, indicating moderate use. In May 2025, the sealing wire, upper and lower rubber seals, and Teflon tape were replaced. Maintenance and repair documentation is available. Due to the aforementioned conveyor belt, the handover will be in the described as-is condition; inspection and functional testing are expressly desired. SCOPE OF DELIVERY - Machine with glass hood, Magelis touchscreen, safety features, and connection cable Itodpfx Ahey Stuxs Dek - At least one suitable film roll with a width of 600 mm - Possibly another partial roll; the exact inventory will be checked before handover - Machine on four swivel casters - Original documents, including data sheet, order confirmation, and available maintenance and service correspondence LOCATION, TRANSPORT, AND HANDOVER Location: 18239 Satow, Mecklenburg-Vorpommern. Inspection and functional testing are possible by appointment. The buyer organizes and pays for collection or transport. If desired, we will assist in organizing a suitable freight or courier transport. Due to the weight of 763 kg, a suitable special pallet and packaging are required; the transport costs will be added to the purchase price. PRICE AND SALE - Offer price: €8,360 net plus statutory VAT - Commercial sale by Marko Strehk Einzelunternehmen - Known wear and tear are fully listed above - The machine can be inspected and tested before handover - In the case of an intra-community delivery, the tax requirements and evidence will be checked in advance If you are interested, we will gladly send you the repair quote and the available documents.

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Iedpowu Dcxefx Ah Dstk Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: excellent (used), Year of construction: 2013, PRATTO equipment for zinc coated welded meshes Technical data for the machine : STARWELD PE is a high-performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets • 2 pay-off for feeding the cross wire • 36 pay-off for feeding the line wire • Fence dimensions between 1 and 3 m (2 types can be made simultaneous, example 1 m with 2 m, 1.5 m with 1.5 m, 1.2 m with 1.8 m) • Range of wire diameter 1.2 – 3 mm • Working speed (strokes/min) Up to 130 Isdpfoyxn Rnjx Ah Dstk • Automatic stacking of rolls • ⁠PLC management

Condition: excellent (used), Year of construction: 2017, Batch mixer, type WBX 1100 1 control unit for the mixer with frequency converter 1 cutter head, 5.5 kW 1 manual shut-off valve 1 separate control panel ("remote control")  maximum useful volume: 770 liters  mixing product: plastic granules  bulk density: ~0.7 - 0.8 kg/liter  product properties: free-flowing  mixing time: < 3 min. MACHINE DESCRIPTION Mixing drum  horizontal cylindrical mixing drum  end walls screwed to the drum Mixing system  mixing tools, such as ploughshares or inclined blades, screwed to blade arms in pockets Bearing  bearing of the shaft in flange bearing housings located outside the mixer, with roller bearings Sealing  shaft sealing by easily replaceable packing glands, packing glands cleaned by air Feeding  2 nozzles with flange, according to dimension sheet Ventilation  through 1 nozzle with flange, according to dimension sheet with filter bag incl. bracket and welded-in protective grid Discharge  via a dead-space-free closing flap, pneumatically operated  1 outlet nozzle with flange, according to dimension sheet Liquid feed option  none Inspection and cleaning  through 1 flap at the front of the drum, (1700 x 550) Flap closed by quick-release fastener  occupational safety and accident prevention by locking magnet and limit switch (not wired) Materials  mixing drum made of: stainless steel 1.4306 Itedpsza Ap Tefx Ah Dok  mixer shaft made of: stainless steel 1.4306  mixing tool made of: stainless steel 1.4306 Subject to prior sale Please send inquiries only by email Note: The machine is in storage and can be inspected on site. The buyer must arrange for shipping. This is not included in the quoted price.

Year of construction: 1985, condition: refurbished (used), Dimeter range- 4-10mm Cutting lenght - 2,0 m ,(possibly longer) Speed -90 m/min. Reconstruction- 2018 Itsdpfx Ahjdt Arlj Dok Control - PLC Siemens Double mechanic pay off wire

Condition: used, This listing is for a Labcold RLPR1514 Refrigerator The unit is in full working condition and is ready for immediate release The Labcold RLPR1514 is a Sparkfree Laboratory Refrigerator with a capacity of 400 litres, designed to safely store flammable materials by eliminating any sources of ignition within its chamber. The Labcold RLPR1514 is a sparkfree laboratory fridge designed for safely storing volatile substances without any sources of ignition inside the chamber. It has a 400L capacity, fan-assisted cooling, and comes with plastic-coated wire mesh shelves. The fridge features a digital temperature display, alarms for high/low temperatures and door open alerts, and includes a fitted door lock. Specifications: External Dimensions: 1855h x 600w x 585d mm Internal Dimensions: W506 x D485 x H1620 mm Safety Features: Sparkfree safety interior Cooling & Defrosting: Off Cycle Automatic defrosting, fan-assisted cooling Ijdpfx Ahoxhf U Ts Dstk Shelves: 6 (including 2 adjustable shelves) Security: Key lock with two keys Temperature Range: 0°C to 10°C Alarms & Monitoring: High/Low temperature alarm Min/Max recording Door open alarm Door Type: Solid

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 320 kg, fuel type: diesel, tank capacity: 30 l, color: green, output current: 39 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 9.9 kW (13.46 HP), nominal power (apparent): 13 kVA, continuous power: 10 kW (13.60 HP), continuous power (apparent): 11 kVA, total length: 1,360 mm, total width: 650 mm, total height: 980 mm, rotational speed (max.): 3,000 rpm, motor manufacturer: China, type of cooling: water, Energy Generator T1200FULL Dealer of ENERGY Power for life The Energy 13.2 kVA Generator T12000FULL diesel generator is available for sale at Van Delft Staal / Aggregaat.store, designed to provide a stable power supply during any power outage. The T12000FULL is equipped with AVR technology (Automatic Voltage Regulation), ensuring the voltage remains constant at all times, making it ideal for connecting sensitive equipment. An optional ATS (Automatic Transfer Switch) is also available for off-grid systems and automatic switching during power outages. This diesel generator operates quietly, efficiently, and is built for long-term reliability, exactly what you would expect from Van Delft Staal/Aggregaat.store. Key advantages: Power: 13.2 kVA / 10.6 kW Power: 9.9 kVA / 7.9 kW Sockets: 230V-16A and 400V-32A 3000 rpm AVR system for stable voltage Predisposition for ATS: Prepared for ATS (Automatic Transfer Switch). This means the unit is already wired or equipped with the necessary connections to install an external switch. Iedpsy S Tq Tofx Ah Detk Quiet, fuel-efficient, and easy to maintain Perfect as a generator during power outages. We ensure all generators are ready to start and operate. In stock.