Pay-off reel 20 tons

Year of construction: 1986, condition: good (used), Built in: 1986 Size: 460 x 310 x 60 mm Speed: 6.000 c/h Equipment: • hand fed • 18 clamps • resting table • milling station • equalizing-leveling • hotmelt spine gluing unit • gauzing station • pile cover feeder Podpfodymnbox Adisgw • four line scoring • cover pressing station

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Under power, can be inspected any time Pgedpfx Ajrx S Hnsdijw

Condition: used, Hydraulic guillotine shear STEINER type HTS 30/20 R Machine. No. 315 Year of construction 1982 cutting length 3050 mm cutting thickness 20 mm Psdpsd Hxx Asfx Adisgw backgauge 800 mm controlled motor power approx. 30 kW mains connection 400 Volt, 50 Hz - backgauge with positioning control ELGO - backgauge adjustment via ball screws - Safety light barrier SICK at the front as intervention protection - 3 material support arms with ball rollers - electric foot switch - spare blade Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space requirement for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Hydraulic problems, Electrical control in need of overhaul.

Year of construction: 1999, condition: excellent (used), machine/vehicle number: 700571/99-280108, Working width max. (mm): 660 Psdpeixqb Sofx Adisgw

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Type GPX 630 Capacity 3000 x 6 Maximum stroke 160 mm Rate 16 to 45 strokes/min Pedpjvt Svrefx Adiegw Cutting angle from 40' to 2°20' Rear stop stroke 1000 mm Motor 15 kw Approximate weight 6500 kg Dimensions 3750x2000x1850 mm

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Pgjdpskh Niqofx Adijw Total power: 15 kW Weight of the machine: 11.000 kg

Condition: new, Year of construction: 2025, Swing cut guillotine shear Cutting length 3100mm Material thickness steel 10mm Knife for stainless steel Touch control Cybelec backgauge 1000mm Cutting gap adjustable via control Pjdpfolac Drsx Adiogw Delivery time 3 months

Condition: used, Year of construction: 1995, Perfect binding line Wohlenberg Master 6501 Year: 1995 Consisting of Gathering machine Wohlenberg Sprinter 7010 Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST (total 4 of 24) - Excluding pump(s) - Machine was connected to a centralised air system - Set up element - Transfer into the binder Perfect binder Wohlenberg Master 6501 Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - Gauzing station Pgjdpfett Ug Isx Adisw - Rotary cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system vertical, length (approx): 30 mtr - Escape delivery Description modified on 14-04-25

Condition: as good as new (ex-display), Year of construction: 2022, pressing force: 320 t, working range: 4,100 mm, Like Baykal 320ton x 4metre Cnc Pressbrake For sale Make: Baykal Capacity: 4metre x 320ton Axis: R and X axis on the back gauge - 2 axis back gauge Year: 2022 Control: Esa S660W Complete with tooling: Multi V lower as well as segmented tooling Technical information: Up to 12mm thickness at 4 meters / Up to 15mm thickness at 3 meters Bending power: 320 tonne 5 axis Pgodpsvgc R Hefx Adijw Bending length (over tooling) 4100mm Bending length (between frames) 3550mm automatic under crowning and laser angle measurement system with live feedback to CNC control for the most accurate folding process

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition Podpfxjw Iq Uge Adiogw