Telescopic work platforms

Manitou 280 TJ

Condition: used, Year of construction: 2019, operating hours: 1,477 h, functionality: fully functional, empty load weight: 16,650 kg, fuel type: diesel, lifting height: 27,730 mm, drive type: Diesel, construction width: 2,480 mm, Articulating boom lift Technical condition: very good Front tyres type: solid rubber Front tyres condition: 80–100% Chedpfx Aevgh S Njl Aoc Rear tyres type: solid rubber Rear tyres condition: 80–100% Battery condition: 80–100% CE certificate, Gradeability: 40% Travel speed – transport mode: 4.50 km/h Travel speed – work mode: 0.80 km/h Permissible tilt in work mode: 4° Hydraulic pressure: 400 bar

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 550 h, machine/vehicle number: 99, 🚀 GEDA 500 Z – OKOMITA GRAĐEVINSKA DIZALICA NA ZUBASTU LETVU Chjdpfxjxvygaj Al Aoc Rabljena, 2015. godina – potpuno servisirana u GEDA Njemačka Jamstvo: 12 mjeseci 🏗️ POUZDAN NJEMAČKI STROJ – SPREMAN ZA RAD GEDA 500 Z je profesionalna okomita građevinska dizalica za materijal, idealna za podizanje teških i glomaznih tereta. Zahvaljujući robusnoj GEDA konstrukciji i jednostavnom održavanju, ovaj model se godinama pokazuje kao jedna od najpouzdanijih dizalica u industriji. Dizalica je servisirana direktno u GEDA Njemačka, potpuno obnovljena i isporučuje se s jamstvom od 12 mjeseci. ⚙️ TEHNIČKE SPECIFIKACIJE Proizvođač: GEDA (Njemačka) Model: 500 Z Godina proizvodnje: 2016. Pogon: 5,5 kW / 400 V / 50 Hz Visina dizanja (max): 100 m Nosivost: 500 kg Brzina dizanja: 30 m/min Dimenzije platforme: 1,4 × 1,6 m Mast sistem: GEDA UNI-X-MAST OPTIČKO STANJE: ODLIČNO - PUNO NOVIH DJELOVA TEHNIČKO STANJE: ODLIČNO - SVAKA DIZALICA POSJEDUJE KONTROLNI LIST PROIZVOĐAČA GEDA DA JE DIZALICA POTPUNO ISPRAVNA 🧰 PRIBOR ZA VISINU DIZANJA DO 20 m Elektromotor s košarom Kabel za visinu dizanja do 50 m – 1 kom ČELIČNI STUP 1,5 m sa zupčastom letvom – 13 kom Učvršćenje za stup – 4 kom Vodilica za kabel – 3 kom Kompletno servisirano, spremno za rad 💡 DODATNE INFORMACIJE ✅ Dizalice servisirane i testirane u Njemačkoj ✅ Jamstvo 12 mjeseci od dana kupnje ✅ GEDA certifikat i dokumentacija proizvođača ✅ Platforma se zakreće za 90° radi lakšeg utovara i istovara ✅ Transportni sustav na jednoj osi dostupan u dodatnoj opremi ✅ Upute dostupne na hrvatskom, njemačkom i engleskom jeziku 🆕 NUDIMO I NOVE GEDA DIZALICE I KOMPLETNU OPREMU Uz rabljene, u ponudi imamo i nove GEDA dizalice i liftove svih tipova: Okomite i kose građevinske dizalice Platforme za materijal i osoblje Pribor i dodatke za sve GEDA modele Sve nove i rabljene, obnovljene GEDA dizalice dolaze s punim jamstvom, certifikatom proizvođača i mogućnošću isporuke odmah. PRVA RUKA – GENERALNI ZASTUPNIK GEDA DIZALICA ZA HRVATSKU VEĆ VIŠE OD 30 GODINA. Specijalizirani za prodaju, najam, servis GEDA liftova, dizalica i kompletne opreme.

Condition: used, Year of construction: 2022, total length: 11,360 mm, - Arbeitshöhe: 27,73 m - Plattformhöhe: 25,73 m - Maximale Seitliche Reichweite: 21,45 m - Korbarm-Drehwinkel (oben/Boden) +56,80° / - 62° - Tragfähigkeit des Arbeitskorbs: 350 kg - Drehung des Oberwagens 360° - Anzahl Personen (innen/außen) 3/2 - Gewicht der Arbeitsbühne: 16500 kg - Arbeitskorb Abmessungen: 2,30 x 0,90 m - Telescopic jib length folded / unfolded: 2800 mm / 4300 mm - Gegengewicht Versatz (Oberwagen bei 90°): 1,43 m - Innerer Wendekreis: 1,97 m - Äußerer Wendekreis: 4,35 m - Fahrgeschwindigkeit Transportmodus: 4,50 km/h - Fahrgeschwindigkeit Arbeitsmodus: 0,80 km/h - Steigfähigkeit 40 % - Zulässige Neigung im Arbeitsmodus: 4° - Bereifung: Vollgummireifen aufvulkanisiert - Antriebsräder vorne/hinten: 2/2 - Lenkräder vorne/hinten: 2/2 - Gebremste Räder / Räder: 2/2 - Motor Hersteller: Yanmar - Modell: 4TNV88C - Nennleistung Verbrennungsmotor / Leistung (kW): 46 Hp / 34,3 kW - Bodendruck: 21,30 dan/cm² - Hydraulikdruck 400 bar Codjztghrspfx Al Ajhc - Fassungsvermögen des Hydrauliktanks 94l - Fassungsvermögen des Kraftstofftanks 76l - Umgebungsgeräusch (LwA)

Condition: new, Year of construction: 2026, total length: 11,350 mm, Articulated telescopic work platform Manitou 280 TJ Drive Diesel Year built 2026 Work height (mm) 27,750 Chjdszyvuzspfx Al Asc

Condition: used, fuel type: diesel, lifting height: 29,500 mm, Year of construction: 2013, Technical information Chassis type: rigid Empty weight: 23.000 kg Top speed: 20 km/h Functional Lifting capacity: 4.999 kg Dimensions of cargo space: 808 x 255 x 315 cm CE mark: yes Condition General condition: average Technical condition: average Chedov Ti Hnjpfx Al Aec Visual appearance: average Other information Delivery terms: EXW Production country: FR Additional information Please contact Christian Theißen for more information = Additional options and accessories = - Forks = Remarks = Manufacturer: Manitou Model: MRT 3050 Year of build: 2013 Condition: Used Data: Max. lifting height: 17,66 m Lifting capacity: 4.000 kg Max. extension: 15,66 m Length forks: 1,20 m Drive type: Diesel Dimensions (without forks): LxB 6,00 x 2,37 m Stowed height: 3,04 m Rotation range: 400° Empty weight: 14.600 kg Special features: All-wheel drive, four-wheel steering, supports, automatic attachment detection, permanently installed particulate filter.

Condition: used, Year of construction: 2019, operating hours: 2,940 h, load capacity: 240 kg, mast type: telescopic, fuel type: diesel, Year of manufacture: 2019 Empty weight: 16.500 kg GVW: 16.740 kg Cjdpfxexb Ay Te Al Ajhc Dimensions (LxBxH): 1135 x 243 x 272 cm Working height: 2.775 cm

Condition: used, Year of construction: 2025, total length: 11,350 mm, - Arbeitshöhe 27.73 m - Plattformhöhe 25.73 m - Max. Reichweite 21.45 m - Vertikaler Drehbarer Korbarm (oben / unten) +56.80 ° / -62 ° - Tragfähigkeit des Arbeitskorbs / maximale Korblast 240 kg / 350 kg - Drehung des Oberwagens 360 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Zulässige Personenanzahl (innen / außen) 3 / 2 - Gegengewicht Versatz (Oberwagen bei 90°) 1.43 m - Gegengewicht Aufmaß / Reichweite 1.45 m - äußerer Wenderadius 4.35 m - Fahrgeschwindigkeit - Transportmodus 4.50 km/h - Fahrgeschwindigkeit - Arbeitsmodus 0.80 km/h - Steigfähigkeit 35 % - Zulässige Neigung im Arbeitsmodus 4 ° - Bereifung Vollgummireifen aufvulkanisiert - Antriebsräder (vorne / hinten) 2 / 2 Chsdpfx Aloy Nflde Asc - Lenkräder (vorne / hinten) 2 / 2 - Gebremste Räder / Räder 2 / 2 - Hersteller / Motormodell Yanmar - 4TNV88C - Motornorm Stage V - Nennleistung Verbrennungsmotor / Leistung 46 Hp / 34.30 kW - Bodendruck 21.30 dan/cm2 - Hydraulikfördermenge – Hydraulikdruck 400 bar - Fassungsvermögen des Hydrauliktanks 94 l - Fassungsvermögen des Kraftstofftanks 76 l - Umgebungsgeräusch (LwA) < 106 dB - Schwingungsbelastung Hand/Arm < 0.50 m/s²

Condition: excellent (used), Year of construction: 2008, operating hours: 2,491 h, machine/vehicle number: 2496, USED KOMATSU BULLDOZER IN VERY GOOD CONDITION MODEL : D93PX-21 Csdpfoxhbv Hex Al Aehc SERIAL : 2496 HOUR : 2491 YEAR : 2008 REGARDS IVAN

Condition: used, Year of construction: 2025, total length: 11,350 mm, - Arbeitshöhe 27.73 m - Plattformhöhe 25.73 m - Max. Reichweite 21.45 m - Vertikaler Drehbarer Korbarm (oben / unten) +56.80 ° / -62 ° - Tragfähigkeit des Arbeitskorbs / maximale Korblast 240 kg / 350 kg - Drehung des Oberwagens 360 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Zulässige Personenanzahl (innen / außen) 3 / 2 - Gegengewicht Versatz (Oberwagen bei 90°) 1.43 m - Gegengewicht Aufmaß / Reichweite 1.45 m - äußerer Wenderadius 4.35 m - Fahrgeschwindigkeit - Transportmodus 4.50 km/h - Fahrgeschwindigkeit - Arbeitsmodus 0.80 km/h - Steigfähigkeit 35 % - Zulässige Neigung im Arbeitsmodus 4 ° - Bereifung Vollgummireifen aufvulkanisiert - Antriebsräder (vorne / hinten) 2 / 2 - Lenkräder (vorne / hinten) 2 / 2 - Gebremste Räder / Räder 2 / 2 - Hersteller / Motormodell Yanmar - 4TNV88C - Motornorm Stage V - Nennleistung Verbrennungsmotor / Leistung 46 Hp / 34.30 kW - Bodendruck 21.30 dan/cm2 - Hydraulikfördermenge – Hydraulikdruck 400 bar - Fassungsvermögen des Hydrauliktanks 94 l - Fassungsvermögen des Kraftstofftanks 76 l Chodpfx Ajzpbppel Aec - Umgebungsgeräusch (LwA) < 106 dB - Schwingungsbelastung Hand/Arm < 0.50 m/s²

Condition: new, functionality: fully functional, Year of construction: 2023, power: 34 kW (46.23 HP), load capacity: 350 kg, empty load weight: 16,500 kg, construction height: 2,730 mm, fuel type: diesel, total length: 8,009 mm, drive type: Diesel, arm reach: 21,450 mm, construction width: 2,480 mm, working height: 27,730 mm, Telescopic work platform Condition: New machine Chedpfjzrcw Hox Al Ajc Technical condition: New Front tire type: Solid rubber Rear tire type: Solid rubber All-wheel drive / steering, color display, LED beacon.

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NB875A is a professional 2-in-1 edge banding solution that combines straight edge banding and Soft Forming technology in a single machine – perfect for handleless doors and modern furniture fronts. Equipped with a complete set of pre-milling, heating, pressing, and finishing units, NB875A delivers flexibility, high productivity, and premium edge quality. Its fully automated control system and intuitive software allow fast switching between 14 different profiles (full C, left/right J, concave center, concave left/right, W-shaped, diamond profiles, etc.). Key Highlights Multi-functional machine for both straight and softforming edge banding in one pass. 14 profiles available, automatically switchable via servo control. Energy-saving function – automatic standby mode after idle time. Advanced industrial control PC with 24” touchscreen, online connectivity, optional barcode reader. Fully enclosed machine with sound-absorbing material for low-noise operation. CE certified, international brand electrical components. Working Units & Equipment Pre-milling unit with 2 electro-pneumatic motors, H35 mm cutters. 2 sets of J & C profile milling units (4 motors – 7.5 kW + 3.5 kW) with automatic switching. Panel pre-heating + 2 glue application units (panel + edge). Softforming & pressing station with precision steel rollers and band pre-heating system. Servo-driven tape feed & pneumatic end trimming (Ø180×3.5×60T saws, 12,000 rpm). Rough & fine trimming units, radius scraping & flat scraping. Double buffing units for a perfect glossy finish. Independent dust extraction hoods (9 × Ø125 mm) for all processing units. Automatic lubrication system and full safety protection (panel thickness detection, feed monitoring, E-STOP). Cjdpoxcwrmofx Al Aehc Technical Specifications Minimum panel size: 300 × 150 mm (central concave ≥ 400 mm) Panel thickness: 18 mm (straight), 18–25 mm (softforming) Edge band thickness: 0.5–0.6 mm (softforming), 0.5–1.2 mm (straight) Feed speed: 8 m/min Power supply: 380V / 50Hz Air pressure: 0.7 MPa Installed power: 68 kW Net weight: approx. 6,000 kg Machine dimensions: 11,015 × 1,000 × 1,940 mm Applications Production of handleless doors for kitchens, wardrobes, and bathroom furniture Complex edge banding operations in medium and large-scale production Premium edge finish with invisible glue line Advantages for Manufacturers Maximum versatility: one machine for all straight & softforming edge banding profiles. Superior finish: smooth edges, perfect glue adhesion. High efficiency: automatic operation, quick profile changeover. Cost reduction: fewer machines required, minimal downtime.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 3355, load capacity: 320 kg, mast type: telescopic, total length: 11,300 mm, total width: 2,460 mm, operation weight: 16,650 kg, Manitou TJ280 from Uniktruck Chodpfxjyuic Ao Al Aoc Wheel type – Drive wheel: Supersoft Wheel type – Steering wheel: Supersoft Wheel size – Drive wheel: 385/45-28 Wheel size – Steering wheel: 385/45-28

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,895 h, machine/vehicle number: HR12674, power: 33 kW (44.87 HP), load capacity: 350 kg, empty load weight: 16,500 kg, construction height: 2,750 mm, fuel type: diesel, total length: 11,350 mm, drive type: Diesel, construction width: 2,430 mm, working height: 27,750 mm, Telescopic work platform Chassis number: HR12674 Condition: Ready for use and fully functional Technical condition: normal Front tires Condition: 40 - 60% Rear tires Condition: 40 - 60% Description: further equipment on request CE certificate, Chodpfewlw Ddex Al Asc

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 820 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,765 mm, fuel type: diesel, mast type: triplex, construction height: 2,910 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,760 kg, total length: 3,748 mm, drive type: Diesel, construction width: 2,080 mm, All-terrain forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Triplex Transmission: Torque converter Speed class: 20 Technical condition: good Front tire type: Pneumatic Front tire size: AS 340/80 R18 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: AS 18-22.5 163A8 Rear tire condition: 80 - 100% Cedox R Hcmspfx Al Aohc Description: The M 50-4 all-terrain forklift is designed for operations in challenging environments or areas with obstacles. With 4-wheel drive and a ground clearance of 43 cm, this forklift ensures optimal maneuverability under all conditions. A wide range of tire options is available for adaptation to varied surfaces, optimizing your productivity. The pendulum-mounted cab, accessible from both sides, offers a spacious driver’s area with ergonomic controls. The elevated driving position provides a 360° panoramic view for enhanced safety for both operator and surroundings. Side shift, 3rd and 4th hydraulic valve, work lights (front/rear), cabin heater, full cab, CE certificate. Includes: service booklet, EC declaration of conformity, operator’s manual, spare parts manual.